[PATCH] staging: dgnc: Patch includes the checkpatch fixes

[Sanidhya Solanki <jpage.lkml@gmail.com>]

>From 1dbe78ce98037da5467d817a9db838d678b338ae Mon Sep 17 00:00:00 2001
From: Sanidhya Solanki <jpage.lkml@gmail.com>
Date: Fri, 11 Dec 2015 03:08:53 -0500
Subject: [PATCH] staging: dgnc: Patch includes the checkpatch fixes

Patch contains the checkpatch fixes as asked by the TODO.
TODO file is updated as well.

Signed-off-by: Sanidhya Solanki <jpage.lkml@gmail.com>
---
 drivers/staging/dgnc/TODO          |   1 -
 drivers/staging/dgnc/dgnc_cls.c    |   4 +-
 drivers/staging/dgnc/dgnc_driver.c |  56 ++++-----
 drivers/staging/dgnc/dgnc_driver.h |  33 +++---
 drivers/staging/dgnc/dgnc_mgmt.c   |  28 ++---
 drivers/staging/dgnc/dgnc_neo.c    | 229 ++++++++++++++++++++++---------------
 drivers/staging/dgnc/dgnc_neo.h    |  22 ++--
 drivers/staging/dgnc/dgnc_pci.h    |   1 -
 drivers/staging/dgnc/dgnc_sysfs.c  | 163 +++++++++++++++++++++-----
 drivers/staging/dgnc/dgnc_tty.c    | 197 +++++++++++++++----------------
 drivers/staging/dgnc/digi.h        |  44 +++----
 11 files changed, 464 insertions(+), 314 deletions(-)

diff --git a/drivers/staging/dgnc/TODO b/drivers/staging/dgnc/TODO
index 0e0825b..0bdfd26 100644
--- a/drivers/staging/dgnc/TODO
+++ b/drivers/staging/dgnc/TODO
@@ -1,4 +1,3 @@
-* checkpatch fixes
 * remove unnecessary comments
 * remove unnecessary error messages. Example kzalloc() has its
   own error message. Adding an extra one is useless.
diff --git a/drivers/staging/dgnc/dgnc_cls.c b/drivers/staging/dgnc/dgnc_cls.c
index 75040da..d312d35 100644
--- a/drivers/staging/dgnc/dgnc_cls.c
+++ b/drivers/staging/dgnc/dgnc_cls.c
@@ -1168,8 +1168,8 @@ static void cls_uart_init(struct channel_t *ch)
 	/* Clear out UART and FIFO */
 	readb(&ch->ch_cls_uart->txrx);
 
-	writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT),
-	       &ch->ch_cls_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+		   UART_FCR_CLEAR_XMIT), &ch->ch_cls_uart->isr_fcr);
 	udelay(10);
 
 	ch->ch_flags |= (CH_FIFO_ENABLED | CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
diff --git a/drivers/staging/dgnc/dgnc_driver.c b/drivers/staging/dgnc/dgnc_driver.c
index fc6d298..37fb8f9 100644
--- a/drivers/staging/dgnc/dgnc_driver.c
+++ b/drivers/staging/dgnc/dgnc_driver.c
@@ -48,7 +48,7 @@ static void		dgnc_do_remap(struct dgnc_board *brd);
 /*
  * File operations permitted on Control/Management major.
  */
-static const struct file_operations dgnc_BoardFops = {
+static const struct file_operations dgnc_board_fops = {
 	.owner		=	THIS_MODULE,
 	.unlocked_ioctl =	dgnc_mgmt_ioctl,
 	.open		=	dgnc_mgmt_open,
@@ -58,11 +58,11 @@ static const struct file_operations dgnc_BoardFops = {
 /*
  * Globals
  */
-uint			dgnc_NumBoards;
-struct dgnc_board		*dgnc_Board[MAXBOARDS];
+uint			dgnc_num_boards;
+struct dgnc_board		*dgnc_board[MAXBOARDS];
 DEFINE_SPINLOCK(dgnc_global_lock);
 DEFINE_SPINLOCK(dgnc_poll_lock); /* Poll scheduling lock */
-uint			dgnc_Major;
+uint			dgnc_major;
 int			dgnc_poll_tick = 20;	/* Poll interval - 20 ms */
 
 /*
@@ -92,7 +92,7 @@ struct board_id {
 	unsigned int is_pci_express;
 };
 
-static struct board_id dgnc_Ids[] = {
+static struct board_id dgnc_ids[] = {
 	{	PCI_DEVICE_CLASSIC_4_PCI_NAME,		4,	0	},
 	{	PCI_DEVICE_CLASSIC_4_422_PCI_NAME,	4,	0	},
 	{	PCI_DEVICE_CLASSIC_8_PCI_NAME,		8,	0	},
@@ -144,19 +144,19 @@ static void dgnc_cleanup_module(void)
 
 	dgnc_remove_driver_sysfiles(&dgnc_driver);
 
-	device_destroy(dgnc_class, MKDEV(dgnc_Major, 0));
+	device_destroy(dgnc_class, MKDEV(dgnc_major, 0));
 	class_destroy(dgnc_class);
-	unregister_chrdev(dgnc_Major, "dgnc");
+	unregister_chrdev(dgnc_major, "dgnc");
 
-	for (i = 0; i < dgnc_NumBoards; ++i) {
-		dgnc_remove_ports_sysfiles(dgnc_Board[i]);
-		dgnc_tty_uninit(dgnc_Board[i]);
-		dgnc_cleanup_board(dgnc_Board[i]);
+	for (i = 0; i < dgnc_num_boards; ++i) {
+		dgnc_remove_ports_sysfiles(dgnc_board[i]);
+		dgnc_tty_uninit(dgnc_board[i]);
+		dgnc_cleanup_board(dgnc_board[i]);
 	}
 
 	dgnc_tty_post_uninit();
 
-	if (dgnc_NumBoards)
+	if (dgnc_num_boards)
 		pci_unregister_driver(&dgnc_driver);
 }
 
@@ -187,7 +187,7 @@ static int __init dgnc_init_module(void)
 	 */
 	if (rc < 0) {
 		/* Only unregister if it was actually registered. */
-		if (dgnc_NumBoards)
+		if (dgnc_num_boards)
 			pci_unregister_driver(&dgnc_driver);
 		else
 			pr_warn("WARNING: dgnc driver load failed.  No Digi Neo or Classic boards found.\n");
@@ -222,12 +222,12 @@ static int dgnc_start(void)
 	 *
 	 * Register management/dpa devices
 	 */
-	rc = register_chrdev(0, "dgnc", &dgnc_BoardFops);
+	rc = register_chrdev(0, "dgnc", &dgnc_board_fops);
 	if (rc < 0) {
 		pr_err(DRVSTR ": Can't register dgnc driver device (%d)\n", rc);
 		return rc;
 	}
-	dgnc_Major = rc;
+	dgnc_major = rc;
 
 	dgnc_class = class_create(THIS_MODULE, "dgnc_mgmt");
 	if (IS_ERR(dgnc_class)) {
@@ -237,7 +237,7 @@ static int dgnc_start(void)
 	}
 
 	dev = device_create(dgnc_class, NULL,
-			    MKDEV(dgnc_Major, 0),
+			    MKDEV(dgnc_major, 0),
 			NULL, "dgnc_mgmt");
 	if (IS_ERR(dev)) {
 		rc = PTR_ERR(dev);
@@ -267,11 +267,11 @@ static int dgnc_start(void)
 	return 0;
 
 failed_tty:
-	device_destroy(dgnc_class, MKDEV(dgnc_Major, 0));
+	device_destroy(dgnc_class, MKDEV(dgnc_major, 0));
 failed_device:
 	class_destroy(dgnc_class);
 failed_class:
-	unregister_chrdev(dgnc_Major, "dgnc");
+	unregister_chrdev(dgnc_major, "dgnc");
 	return rc;
 }
 
@@ -288,7 +288,7 @@ static int dgnc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	} else {
 		rc = dgnc_found_board(pdev, ent->driver_data);
 		if (rc == 0)
-			dgnc_NumBoards++;
+			dgnc_num_boards++;
 	}
 	return rc;
 }
@@ -351,7 +351,7 @@ static void dgnc_cleanup_board(struct dgnc_board *brd)
 		}
 	}
 
-	dgnc_Board[brd->boardnum] = NULL;
+	dgnc_board[brd->boardnum] = NULL;
 
 	kfree(brd);
 }
@@ -370,8 +370,8 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
 	unsigned long flags;
 
 	/* get the board structure and prep it */
-	dgnc_Board[dgnc_NumBoards] = kzalloc(sizeof(*brd), GFP_KERNEL);
-	brd = dgnc_Board[dgnc_NumBoards];
+	dgnc_board[dgnc_num_boards] = kzalloc(sizeof(*brd), GFP_KERNEL);
+	brd = dgnc_board[dgnc_num_boards];
 
 	if (!brd)
 		return -ENOMEM;
@@ -387,15 +387,15 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
 
 	/* store the info for the board we've found */
 	brd->magic = DGNC_BOARD_MAGIC;
-	brd->boardnum = dgnc_NumBoards;
+	brd->boardnum = dgnc_num_boards;
 	brd->vendor = dgnc_pci_tbl[id].vendor;
 	brd->device = dgnc_pci_tbl[id].device;
 	brd->pdev = pdev;
 	brd->pci_bus = pdev->bus->number;
 	brd->pci_slot = PCI_SLOT(pdev->devfn);
-	brd->name = dgnc_Ids[id].name;
-	brd->maxports = dgnc_Ids[id].maxports;
-	if (dgnc_Ids[i].is_pci_express)
+	brd->name = dgnc_ids[id].name;
+	brd->maxports = dgnc_ids[id].maxports;
+	if (dgnc_ids[i].is_pci_express)
 		brd->bd_flags |= BD_IS_PCI_EXPRESS;
 	brd->dpastatus = BD_NOFEP;
 	init_waitqueue_head(&brd->state_wait);
@@ -647,8 +647,8 @@ static void dgnc_poll_handler(ulong dummy)
 	unsigned long new_time;
 
 	/* Go thru each board, kicking off a tasklet for each if needed */
-	for (i = 0; i < dgnc_NumBoards; i++) {
-		brd = dgnc_Board[i];
+	for (i = 0; i < dgnc_num_boards; i++) {
+		brd = dgnc_board[i];
 
 		spin_lock_irqsave(&brd->bd_lock, flags);
 
diff --git a/drivers/staging/dgnc/dgnc_driver.h b/drivers/staging/dgnc/dgnc_driver.h
index ce7cd9b..7bed033 100644
--- a/drivers/staging/dgnc/dgnc_driver.h
+++ b/drivers/staging/dgnc/dgnc_driver.h
@@ -24,6 +24,7 @@
 #include <linux/types.h>
 #include <linux/tty.h>
 #include <linux/interrupt.h>
+#include <linux/spinlock_types.h>
 
 #include "digi.h"		/* Digi specific ioctl header */
 #include "dgnc_sysfs.h"		/* Support for SYSFS */
@@ -88,7 +89,6 @@
 #define   _POSIX_VDISABLE '\0'
 #endif
 
-
 /*
  * All the possible states the driver can be while being loaded.
  */
@@ -106,7 +106,6 @@ enum {
 	BOARD_READY
 };
 
-
 /*************************************************************************
  *
  * Structures and closely related defines.
@@ -145,7 +144,6 @@ struct board_ops {
  ************************************************************************/
 #define BD_IS_PCI_EXPRESS     0x0001	  /* Is a PCI Express board */
 
-
 /*
  *	Per-board information
  */
@@ -205,18 +203,18 @@ struct dgnc_board {
 						 * to our channels.
 						 */
 
-	struct tty_driver	SerialDriver;
-	char		SerialName[200];
-	struct tty_driver	PrintDriver;
-	char		PrintName[200];
+	struct tty_driver	serial_driver;
+	char		serial_name[200];
+	struct tty_driver	print_driver;
+	char		print_name[200];
 
-	bool		dgnc_Major_Serial_Registered;
-	bool		dgnc_Major_TransparentPrint_Registered;
+	bool		dgnc_major_serial_registered;
+	bool		dgnc_major_transparent_print_registered;
 
-	uint		dgnc_Serial_Major;
-	uint		dgnc_TransparentPrint_Major;
+	uint		dgnc_serial_major;
+	uint		dgnc_transparent_print_major;
 
-	uint		TtyRefCnt;
+	uint		tty_ref_cnt;
 
 	u16		dpatype;	/* The board "type",
 					 * as defined by DPA
@@ -241,7 +239,6 @@ struct dgnc_board {
 
 };
 
-
 /************************************************************************
  * Unit flag definitions for un_flags.
  ************************************************************************/
@@ -277,7 +274,6 @@ struct un_t {
 	struct device *un_sysfs;
 };
 
-
 /************************************************************************
  * Device flag definitions for ch_flags.
  ************************************************************************/
@@ -300,7 +296,6 @@ struct un_t {
 #define CH_FORCED_STOP  0x20000		/* Output is forcibly stopped	*/
 #define CH_FORCED_STOPI 0x40000		/* Input is forcibly stopped	*/
 
-
 /* Our Read/Error/Write queue sizes */
 #define RQUEUEMASK	0x1FFF		/* 8 K - 1 */
 #define EQUEUEMASK	0x1FFF		/* 8 K - 1 */
@@ -309,7 +304,6 @@ struct un_t {
 #define EQUEUESIZE	RQUEUESIZE
 #define WQUEUESIZE	(WQUEUEMASK + 1)
 
-
 /************************************************************************
  * Channel information structure.
  ************************************************************************/
@@ -397,7 +391,6 @@ struct channel_t {
 	ulong		ch_intr_tx;	/* Count of interrupts */
 	ulong		ch_intr_rx;	/* Count of interrupts */
 
-
 	/* /proc/<board>/<channel> entries */
 	struct proc_dir_entry *proc_entry_pointer;
 	struct dgnc_proc_entry *dgnc_channel_table;
@@ -407,12 +400,12 @@ struct channel_t {
 /*
  * Our Global Variables.
  */
-extern uint		dgnc_Major;		/* Our driver/mgmt major */
+extern uint		dgnc_major;		/* Our driver/mgmt major */
 extern int		dgnc_poll_tick;		/* Poll interval - 20 ms */
 extern spinlock_t	dgnc_global_lock;	/* Driver global spinlock */
 extern spinlock_t	dgnc_poll_lock;		/* Poll scheduling lock */
-extern uint		dgnc_NumBoards;		/* Total number of boards */
-extern struct dgnc_board	*dgnc_Board[MAXBOARDS];	/* Array of board
+extern uint		dgnc_num_boards;	/* Total number of boards */
+extern struct dgnc_board	*dgnc_board[MAXBOARDS];	/* Array of board
 							 * structs
 							 */
 
diff --git a/drivers/staging/dgnc/dgnc_mgmt.c b/drivers/staging/dgnc/dgnc_mgmt.c
index 518fbd5..35a9295 100644
--- a/drivers/staging/dgnc/dgnc_mgmt.c
+++ b/drivers/staging/dgnc/dgnc_mgmt.c
@@ -111,7 +111,7 @@ long dgnc_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		spin_lock_irqsave(&dgnc_global_lock, flags);
 
 		memset(&ddi, 0, sizeof(ddi));
-		ddi.dinfo_nboards = dgnc_NumBoards;
+		ddi.dinfo_nboards = dgnc_num_boards;
 		sprintf(ddi.dinfo_version, "%s", DG_PART);
 
 		spin_unlock_irqrestore(&dgnc_global_lock, flags);
@@ -131,27 +131,27 @@ long dgnc_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		if (copy_from_user(&brd, uarg, sizeof(int)))
 			return -EFAULT;
 
-		if (brd < 0 || brd >= dgnc_NumBoards)
+		if (brd < 0 || brd >= dgnc_num_boards)
 			return -ENODEV;
 
 		memset(&di, 0, sizeof(di));
 
 		di.info_bdnum = brd;
 
-		spin_lock_irqsave(&dgnc_Board[brd]->bd_lock, flags);
+		spin_lock_irqsave(&dgnc_board[brd]->bd_lock, flags);
 
-		di.info_bdtype = dgnc_Board[brd]->dpatype;
-		di.info_bdstate = dgnc_Board[brd]->dpastatus;
+		di.info_bdtype = dgnc_board[brd]->dpatype;
+		di.info_bdstate = dgnc_board[brd]->dpastatus;
 		di.info_ioport = 0;
-		di.info_physaddr = (ulong)dgnc_Board[brd]->membase;
-		di.info_physsize = (ulong)dgnc_Board[brd]->membase
-			- dgnc_Board[brd]->membase_end;
-		if (dgnc_Board[brd]->state != BOARD_FAILED)
-			di.info_nports = dgnc_Board[brd]->nasync;
+		di.info_physaddr = (ulong)dgnc_board[brd]->membase;
+		di.info_physsize = (ulong)dgnc_board[brd]->membase
+			- dgnc_board[brd]->membase_end;
+		if (dgnc_board[brd]->state != BOARD_FAILED)
+			di.info_nports = dgnc_board[brd]->nasync;
 		else
 			di.info_nports = 0;
 
-		spin_unlock_irqrestore(&dgnc_Board[brd]->bd_lock, flags);
+		spin_unlock_irqrestore(&dgnc_board[brd]->bd_lock, flags);
 
 		if (copy_to_user(uarg, &di, sizeof(di)))
 			return -EFAULT;
@@ -174,14 +174,14 @@ long dgnc_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		channel = ni.channel;
 
 		/* Verify boundaries on board */
-		if (board >= dgnc_NumBoards)
+		if (board >= dgnc_num_boards)
 			return -ENODEV;
 
 		/* Verify boundaries on channel */
-		if (channel >= dgnc_Board[board]->nasync)
+		if (channel >= dgnc_board[board]->nasync)
 			return -ENODEV;
 
-		ch = dgnc_Board[board]->channels[channel];
+		ch = dgnc_board[board]->channels[channel];
 
 		if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
 			return -ENODEV;
diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c
index 8106f52..fead81e 100644
--- a/drivers/staging/dgnc/dgnc_neo.c
+++ b/drivers/staging/dgnc/dgnc_neo.c
@@ -77,7 +77,8 @@ struct board_ops dgnc_neo_ops = {
 	.send_immediate_char =		neo_send_immediate_char
 };
 
-static uint dgnc_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
+static uint dgnc_offset_table[8] = { 0x01, 0x02, 0x04,
+			0x08, 0x10, 0x20, 0x40, 0x80 };
 
 /*
  * This function allows calls to ensure that all outstanding
@@ -109,14 +110,17 @@ static inline void neo_set_cts_flow_control(struct channel_t *ch)
 	/* Turn off auto Xon flow control */
 	efr &= ~UART_17158_EFR_IXON;
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Why? Becuz Exar's spec says we have to
+	 * zero it out before setting it
+	 */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY),
+	       &ch->ch_neo_uart->fctr);
 
 	/* Feed the UART our trigger levels */
 	writeb(8, &ch->ch_neo_uart->tfifo);
@@ -144,13 +148,16 @@ static inline void neo_set_rts_flow_control(struct channel_t *ch)
 	ier &= ~UART_17158_IER_XOFF;
 	efr &= ~UART_17158_EFR_IXOFF;
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Why? Becuz Exar's spec says we have to
+	 * zero it out before setting it
+	 */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY),
+	       &ch->ch_neo_uart->fctr);
 	ch->ch_r_watermark = 4;
 
 	writeb(32, &ch->ch_neo_uart->rfifo);
@@ -181,13 +188,16 @@ static inline void neo_set_ixon_flow_control(struct channel_t *ch)
 	/* Turn on auto Xon flow control */
 	efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON);
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Why? Becuz Exar's spec says we have to
+	 * zero it out before setting it
+	 */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+	       &ch->ch_neo_uart->fctr);
 	ch->ch_r_watermark = 4;
 
 	writeb(32, &ch->ch_neo_uart->rfifo);
@@ -218,14 +228,17 @@ static inline void neo_set_ixoff_flow_control(struct channel_t *ch)
 	ier |= UART_17158_IER_XOFF;
 	efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF);
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Why? Becuz Exar's spec says we have to
+	 * zero it out before setting it
+	 */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+	       &ch->ch_neo_uart->fctr);
 
 	writeb(8, &ch->ch_neo_uart->tfifo);
 	ch->ch_t_tlevel = 8;
@@ -258,14 +271,17 @@ static inline void neo_set_no_input_flow_control(struct channel_t *ch)
 	else
 		efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF);
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Why? Becuz Exar's spec says we have to
+	 * zero it out before setting it
+	 */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+	       &ch->ch_neo_uart->fctr);
 
 	ch->ch_r_watermark = 0;
 
@@ -295,14 +311,17 @@ static inline void neo_set_no_output_flow_control(struct channel_t *ch)
 	else
 		efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON);
 
-	/* Why? Becuz Exar's spec says we have to zero it out before setting it */
+	/* Why? Becuz Exar's spec says we have to
+	 * zero it out before setting it
+	 */
 	writeb(0, &ch->ch_neo_uart->efr);
 
 	/* Turn on UART enhanced bits */
 	writeb(efr, &ch->ch_neo_uart->efr);
 
 	/* Turn on table D, with 8 char hi/low watermarks */
-	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+	writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY),
+	       &ch->ch_neo_uart->fctr);
 
 	ch->ch_r_watermark = 0;
 
@@ -321,7 +340,8 @@ static inline void neo_set_no_output_flow_control(struct channel_t *ch)
 static inline void neo_set_new_start_stop_chars(struct channel_t *ch)
 {
 	/* if hardware flow control is set, then skip this whole thing */
-	if (ch->ch_digi.digi_flags & (CTSPACE | RTSPACE) || ch->ch_c_cflag & CRTSCTS)
+	if (ch->ch_digi.digi_flags & (CTSPACE | RTSPACE) ||
+	    ch->ch_c_cflag & CRTSCTS)
 		return;
 
 	/* Tell UART what start/stop chars it should be looking for */
@@ -393,7 +413,8 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 			break;
 
 		/*
-		 * Yank off the upper 2 bits, which just show that the FIFO's are enabled.
+		 * Yank off the upper 2 bits, which just show that
+		 * the FIFO's are enabled.
 		 */
 		isr &= ~(UART_17158_IIR_FIFO_ENABLED);
 
@@ -403,7 +424,7 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 			ch->ch_intr_rx++;
 			neo_copy_data_from_uart_to_queue(ch);
 
-			/* Call our tty layer to enforce queue flow control if needed. */
+	/* Call our tty layer to enforce queue flow control if needed. */
 			spin_lock_irqsave(&ch->ch_lock, flags);
 			dgnc_check_queue_flow_control(ch);
 			spin_unlock_irqrestore(&ch->ch_lock, flags);
@@ -424,11 +445,11 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 
 			/*
 			 * Since the UART detected either an XON or
-			 * XOFF match, we need to figure out which
-			 * one it was, so we can suspend or resume data flow.
+			 * XOFF match, we need to figure out which one it
+			 * was, so we can suspend or resume data flow.
 			 */
 			if (cause == UART_17158_XON_DETECT) {
-				/* Is output stopped right now, if so, resume it */
+			/* Is output stopped right now, if so, resume it */
 				if (brd->channels[port]->ch_flags & CH_STOP) {
 					spin_lock_irqsave(&ch->ch_lock,
 							  flags);
@@ -449,8 +470,9 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port)
 
 		if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) {
 			/*
-			 * If we get here, this means the hardware is doing auto flow control.
-			 * Check to see whether RTS/DTR or CTS/DSR caused this interrupt.
+			 * If we get here, this means the hardware is doing
+			 * auto flow control. Check to see whether RTS/DTR or
+			 * CTS/DSR caused this interrupt.
 			 */
 			brd->intr_modem++;
 			ch->ch_intr_modem++;
@@ -545,7 +567,7 @@ static inline void neo_parse_lsr(struct dgnc_board *brd, uint port)
 		 * Rx Oruns. Exar says that an orun will NOT corrupt
 		 * the FIFO. It will just replace the holding register
 		 * with this new data byte. So basically just ignore this.
-		 * Probably we should eventually have an orun stat in our driver...
+		 * We should eventually have an orun stat in our driver.
 		 */
 		ch->ch_err_overrun++;
 	}
@@ -665,8 +687,11 @@ static void neo_param(struct tty_struct *tty)
 				4800,   9600,   19200,  38400 }
 		};
 
-		/* Only use the TXPrint baud rate if the terminal unit is NOT open */
-		if (!(ch->ch_tun.un_flags & UN_ISOPEN) && (un->un_type == DGNC_PRINT))
+		/* Only use the TXPrint baud rate if the
+		 * terminal unit is NOT open
+		 */
+		if (!(ch->ch_tun.un_flags & UN_ISOPEN) &&
+			(un->un_type == DGNC_PRINT))
 			baud = C_BAUD(ch->ch_pun.un_tty) & 0xff;
 		else
 			baud = C_BAUD(ch->ch_tun.un_tty) & 0xff;
@@ -679,7 +704,8 @@ static void neo_param(struct tty_struct *tty)
 
 		jindex = baud;
 
-		if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16))
+		if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) &&
+			(jindex < 16))
 			baud = bauds[iindex][jindex];
 		else
 			baud = 0;
@@ -786,8 +812,11 @@ static void neo_param(struct tty_struct *tty)
 	if (ch->ch_digi.digi_flags & CTSPACE || ch->ch_c_cflag & CRTSCTS) {
 		neo_set_cts_flow_control(ch);
 	} else if (ch->ch_c_iflag & IXON) {
-		/* If start/stop is set to disable, then we should disable flow control */
-		if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE))
+		/* If start/stop is set to disable, then we
+		 * should disable flow control
+		 */
+		if ((ch->ch_startc == _POSIX_VDISABLE) ||
+			(ch->ch_stopc == _POSIX_VDISABLE))
 			neo_set_no_output_flow_control(ch);
 		else
 			neo_set_ixon_flow_control(ch);
@@ -798,8 +827,11 @@ static void neo_param(struct tty_struct *tty)
 	if (ch->ch_digi.digi_flags & RTSPACE || ch->ch_c_cflag & CRTSCTS) {
 		neo_set_rts_flow_control(ch);
 	} else if (ch->ch_c_iflag & IXOFF) {
-		/* If start/stop is set to disable, then we should disable flow control */
-		if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE))
+		/* If start/stop is set to disable, then we
+		 * should disable flow control
+		 */
+		if ((ch->ch_startc == _POSIX_VDISABLE) ||
+			(ch->ch_stopc == _POSIX_VDISABLE))
 			neo_set_no_input_flow_control(ch);
 		else
 			neo_set_ixoff_flow_control(ch);
@@ -936,16 +968,16 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 	 */
 	uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET);
 
-	/*
-	 * If 0, no interrupts pending.
-	 * This can happen if the IRQ is shared among a couple Neo/Classic boards.
-	 */
+/*
+ * If 0, no interrupts pending.
+ * This can happen if the IRQ is shared among a couple Neo/Classic boards.
+ */
 	if (!uart_poll) {
 		spin_unlock_irqrestore(&brd->bd_intr_lock, flags);
 		return IRQ_NONE;
 	}
 
-	/* At this point, we have at least SOMETHING to service, dig further... */
+/* At this point, we have at least SOMETHING to service, dig further.*/
 
 	current_port = 0;
 
@@ -967,7 +999,7 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 		uart_poll &= ~(dgnc_offset_table[port]);
 
 		if (!type) {
-			/* If no type, just ignore it, and move onto next port */
+		/* If no type, just ignore it, and move onto next port */
 			continue;
 		}
 
@@ -986,7 +1018,7 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 			ch = brd->channels[port];
 			neo_copy_data_from_uart_to_queue(ch);
 
-			/* Call our tty layer to enforce queue flow control if needed. */
+	/* Call our tty layer to enforce queue flow control if needed. */
 			spin_lock_irqsave(&ch->ch_lock, flags2);
 			dgnc_check_queue_flow_control(ch);
 			spin_unlock_irqrestore(&ch->ch_lock, flags2);
@@ -1001,18 +1033,19 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 			continue;
 
 		case UART_17158_TXRDY:
-			/*
-			 * TXRDY interrupt clears after reading ISR register for the UART channel.
-			 */
+		/*
+		 * TXRDY interrupt clears after reading ISR
+		 * register for the UART channel.
+		 */
 
-			/*
-			 * Yes, this is odd...
-			 * Why would I check EVERY possibility of type of
-			 * interrupt, when we know its TXRDY???
-			 * Becuz for some reason, even tho we got triggered for TXRDY,
-			 * it seems to be occasionally wrong. Instead of TX, which
-			 * it should be, I was getting things like RXDY too. Weird.
-			 */
+		/*
+		 * Yes, this is odd...
+		 * Why would I check EVERY possibility of type of
+		 * interrupt, when we know its TXRDY???
+		 * Becuz for some reason, even tho we got triggered for TXRDY,
+		 * it seems to be occasionally wrong. Instead of TX, which
+		 * it should be, I was getting things like RXDY too. Weird.
+		 */
 			neo_parse_isr(brd, port);
 			continue;
 
@@ -1024,12 +1057,12 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 			continue;
 
 		default:
-			/*
-			 * The UART triggered us with a bogus interrupt type.
-			 * It appears the Exar chip, when REALLY bogged down, will throw
-			 * these once and awhile.
-			 * Its harmless, just ignore it and move on.
-			 */
+		/*
+		 * The UART triggered us with a bogus interrupt type.
+		 * It appears the Exar chip, when REALLY bogged down,
+		 * will throw these once and awhile.
+		 * Its harmless, just ignore it and move on.
+		 */
 			continue;
 		}
 	}
@@ -1108,9 +1141,9 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 	 * On the other hand, if the UART IS in FIFO mode, then ask
 	 * the UART to give us an approximation of data it has RX'ed.
 	 */
-	if (!(ch->ch_flags & CH_FIFO_ENABLED))
+	if (!(ch->ch_flags & CH_FIFO_ENABLED)) {
 		total = 0;
-	else {
+	} else {
 		total = readb(&ch->ch_neo_uart->rfifo);
 
 		/*
@@ -1172,7 +1205,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		linestatus = 0;
 
 		/* Copy data from uart to the queue */
-		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
+		memcpy_fromio(ch->ch_rqueue + head,
+					  &ch->ch_neo_uart->txrxburst, n);
 
 		/*
 		 * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed
@@ -1225,7 +1259,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		 * we don't miss our TX FIFO emptys.
 		 */
 		if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) {
-			linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR);
+			linestatus &= ~(UART_LSR_THRE |
+							UART_17158_TX_AND_FIFO_CLR);
 			ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
 		}
 
@@ -1241,9 +1276,10 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		}
 
 		/*
-		 * If our queue is full, we have no choice but to drop some data.
-		 * The assumption is that HWFLOW or SWFLOW should have stopped
-		 * things way way before we got to this point.
+		 * If our queue is full, we have no choice but to
+		 * drop some data. The assumption is that HWFLOW or
+		 * SWFLOW should have stopped things way way before
+		 * we got to this point.
 		 *
 		 * I decided that I wanted to ditch the oldest data first,
 		 * I hope thats okay with everyone? Yes? Good.
@@ -1255,7 +1291,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 			qleft++;
 		}
 
-		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1);
+		memcpy_fromio(ch->ch_rqueue + head,
+					  &ch->ch_neo_uart->txrxburst, 1);
 		ch->ch_equeue[head] = (unsigned char)linestatus;
 
 		/* Ditch any remaining linestatus value. */
@@ -1309,7 +1346,8 @@ static int neo_drain(struct tty_struct *tty, uint seconds)
 	 *
 	 * NOTE: TODO: Do something with time passed in.
 	 */
-	rc = wait_event_interruptible(un->un_flags_wait, ((un->un_flags & UN_EMPTY) == 0));
+	rc = wait_event_interruptible(un->un_flags_wait,
+		 ((un->un_flags & UN_EMPTY) == 0));
 
 	/* If ret is non-zero, user ctrl-c'ed us */
 	return rc;
@@ -1328,11 +1366,12 @@ static void neo_flush_uart_write(struct channel_t *ch)
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
 		return;
 
-	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT),
+		   &ch->ch_neo_uart->isr_fcr);
 	neo_pci_posting_flush(ch->ch_bd);
 
 	for (i = 0; i < 10; i++) {
-		/* Check to see if the UART feels it completely flushed the FIFO. */
+/* Check to see if the UART feels it completely flushed the FIFO. */
 		tmp = readb(&ch->ch_neo_uart->isr_fcr);
 		if (tmp & 4)
 			udelay(10);
@@ -1356,11 +1395,12 @@ static void neo_flush_uart_read(struct channel_t *ch)
 	if (!ch || ch->magic != DGNC_CHANNEL_MAGIC)
 		return;
 
-	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR),
+		   &ch->ch_neo_uart->isr_fcr);
 	neo_pci_posting_flush(ch->ch_bd);
 
 	for (i = 0; i < 10; i++) {
-		/* Check to see if the UART feels it completely flushed the FIFO. */
+/* Check to see if the UART feels it completely flushed the FIFO. */
 		tmp = readb(&ch->ch_neo_uart->isr_fcr);
 		if (tmp & 2)
 			udelay(10);
@@ -1404,10 +1444,11 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 		if (ch->ch_cached_lsr & UART_LSR_THRE) {
 			ch->ch_cached_lsr &= ~(UART_LSR_THRE);
 
-			/*
-			 * If RTS Toggle mode is on, turn on RTS now if not already set,
-			 * and make sure we get an event when the data transfer has completed.
-			 */
+		/*
+		 * If RTS Toggle mode is on, turn on RTS now if
+		 * not already set, and make sure we get an event
+		 * when the data transfer has completed.
+		 */
 			if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {
 				if (!(ch->ch_mostat & UART_MCR_RTS)) {
 					ch->ch_mostat |= (UART_MCR_RTS);
@@ -1415,10 +1456,11 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 				}
 				ch->ch_tun.un_flags |= (UN_EMPTY);
 			}
-			/*
-			 * If DTR Toggle mode is on, turn on DTR now if not already set,
-			 * and make sure we get an event when the data transfer has completed.
-			 */
+	/*
+	 * If DTR Toggle mode is on, turn on DTR now if not
+	 * already set, and make sure we get an event when the
+	 * data transfer has completed.
+	 */
 			if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {
 				if (!(ch->ch_mostat & UART_MCR_DTR)) {
 					ch->ch_mostat |= (UART_MCR_DTR);
@@ -1427,7 +1469,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 				ch->ch_tun.un_flags |= (UN_EMPTY);
 			}
 
-			writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx);
+			writeb(ch->ch_wqueue[ch->ch_w_tail],
+				   &ch->ch_neo_uart->txrx);
 			ch->ch_w_tail++;
 			ch->ch_w_tail &= WQUEUEMASK;
 			ch->ch_txcount++;
@@ -1470,10 +1513,11 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 		if (s <= 0)
 			break;
 
-		/*
-		 * If RTS Toggle mode is on, turn on RTS now if not already set,
-		 * and make sure we get an event when the data transfer has completed.
-		 */
+	/*
+	 * If RTS Toggle mode is on, turn on RTS now if not
+	 * already set, and make sure we get an event when
+	 * the data transfer has completed.
+	 */
 		if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {
 			if (!(ch->ch_mostat & UART_MCR_RTS)) {
 				ch->ch_mostat |= (UART_MCR_RTS);
@@ -1482,10 +1526,11 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 			ch->ch_tun.un_flags |= (UN_EMPTY);
 		}
 
-		/*
-		 * If DTR Toggle mode is on, turn on DTR now if not already set,
-		 * and make sure we get an event when the data transfer has completed.
-		 */
+	/*
+	 * If DTR Toggle mode is on, turn on DTR now if not
+	 * already set, and make sure we get an event when the
+	 * data transfer has completed.
+	 */
 		if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {
 			if (!(ch->ch_mostat & UART_MCR_DTR)) {
 				ch->ch_mostat |= (UART_MCR_DTR);
@@ -1494,7 +1539,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch)
 			ch->ch_tun.un_flags |= (UN_EMPTY);
 		}
 
-		memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s);
+		memcpy_toio(&ch->ch_neo_uart->txrxburst,
+				    ch->ch_wqueue + tail, s);
 
 		/* Add and flip queue if needed */
 		tail = (tail + s) & WQUEUEMASK;
@@ -1547,7 +1593,7 @@ static void neo_parse_modem(struct channel_t *ch, unsigned char signals)
 		}
 	}
 
-	/* Scrub off lower bits. They signify delta's, which I don't care about */
+	/* Scrub off lower bits. They signify deltas */
 	msignals &= 0xf0;
 
 	if (msignals & UART_MSR_DCD)
@@ -1628,7 +1674,8 @@ static void neo_uart_init(struct channel_t *ch)
 
 	/* Clear out UART and FIFO */
 	readb(&ch->ch_neo_uart->txrx);
-	writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+	writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR
+		   | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
 	readb(&ch->ch_neo_uart->lsr);
 	readb(&ch->ch_neo_uart->msr);
 
@@ -1725,7 +1772,8 @@ static void neo_send_immediate_char(struct channel_t *ch, unsigned char c)
 	neo_pci_posting_flush(ch->ch_bd);
 }
 
-static unsigned int neo_read_eeprom(unsigned char __iomem *base, unsigned int address)
+static unsigned int neo_read_eeprom(unsigned char __iomem *base,
+									unsigned int address)
 {
 	unsigned int enable;
 	unsigned int bits;
@@ -1779,12 +1827,13 @@ static void neo_vpd(struct dgnc_board *brd)
 	/* Store the VPD into our buffer */
 	for (i = 0; i < NEO_VPD_IMAGESIZE; i++) {
 		a = neo_read_eeprom(brd->re_map_membase, i);
-		brd->vpd[i*2] = a & 0xff;
-		brd->vpd[(i*2)+1] = (a >> 8) & 0xff;
+		brd->vpd[i * 2] = a & 0xff;
+		brd->vpd[(i * 2) + 1] = (a >> 8) & 0xff;
 	}
 
 	if  (((brd->vpd[0x08] != 0x82)	   /* long resource name tag */
-		&&  (brd->vpd[0x10] != 0x82))   /* long resource name tag (PCI-66 files)*/
+		&&  (brd->vpd[0x10] != 0x82))
+		/* long resource name tag (PCI-66 files)*/
 		||  (brd->vpd[0x7F] != 0x78)) { /* small resource end tag */
 
 		memset(brd->vpd, '\0', NEO_VPD_IMAGESIZE);
diff --git a/drivers/staging/dgnc/dgnc_neo.h b/drivers/staging/dgnc/dgnc_neo.h
index c528df5..5be232f 100644
--- a/drivers/staging/dgnc/dgnc_neo.h
+++ b/drivers/staging/dgnc/dgnc_neo.h
@@ -30,7 +30,8 @@
 struct neo_uart_struct {
 	u8 txrx;		/* WR  RHR/THR - Holding Reg */
 	u8 ier;		/* WR  IER - Interrupt Enable Reg */
-	u8 isr_fcr;		/* WR  ISR/FCR - Interrupt Status Reg/Fifo Control Reg */
+	u8 isr_fcr;
+	/* WR  ISR/FCR - Interrupt Status Reg/Fifo Control Reg */
 	u8 lcr;		/* WR  LCR - Line Control Reg */
 	u8 mcr;		/* WR  MCR - Modem Control Reg */
 	u8 lsr;		/* WR  LSR - Line Status Reg */
@@ -65,8 +66,8 @@ struct neo_uart_struct {
 #define NEO_EEDO  0x80		/* Data Out is an Input Pin */
 #define NEO_EEREG 0x8E		/* offset to EEPROM control reg */
 
-
-#define NEO_VPD_IMAGESIZE 0x40	/* size of image to read from EEPROM in words */
+#define NEO_VPD_IMAGESIZE 0x40
+/* size of image to read from EEPROM in words */
 #define NEO_VPD_IMAGEBYTES (NEO_VPD_IMAGESIZE * 2)
 
 /*
@@ -109,7 +110,8 @@ struct neo_uart_struct {
 /* 17158 Extended IIR's */
 #define UART_17158_IIR_RDI_TIMEOUT	0x0C	/* Receiver data TIMEOUT */
 #define UART_17158_IIR_XONXOFF		0x10	/* Received an XON/XOFF char */
-#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20	/* CTS/DSR or RTS/DTR state change */
+#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20
+/* CTS/DSR or RTS/DTR state change */
 #define UART_17158_IIR_FIFO_ENABLED	0xC0	/* 16550 FIFOs are Enabled */
 
 /*
@@ -120,8 +122,10 @@ struct neo_uart_struct {
 #define UART_17158_RXRDY_TIMEOUT	0x2	/* RX Ready Timeout */
 #define UART_17158_TXRDY		0x3	/* TX Ready */
 #define UART_17158_MSR			0x4	/* Modem State Change */
-#define UART_17158_TX_AND_FIFO_CLR	0x40	/* Transmitter Holding Reg Empty */
-#define UART_17158_RX_FIFO_DATA_ERROR	0x80	/* UART detected an RX FIFO Data error */
+#define UART_17158_TX_AND_FIFO_CLR	0x40
+/* Transmitter Holding Reg Empty */
+#define UART_17158_RX_FIFO_DATA_ERROR	0x80
+/* UART detected an RX FIFO Data error */
 
 /*
  * These are the EXTENDED definitions for the 17C158's Interrupt
@@ -133,8 +137,10 @@ struct neo_uart_struct {
 #define UART_17158_EFR_RTSDTR	0x40	/* Auto RTS/DTR Flow Control Enable */
 #define UART_17158_EFR_CTSDSR	0x80	/* Auto CTS/DSR Flow COntrol Enable */
 
-#define UART_17158_XOFF_DETECT	0x1	/* Indicates whether chip saw an incoming XOFF char  */
-#define UART_17158_XON_DETECT	0x2	/* Indicates whether chip saw an incoming XON char */
+#define UART_17158_XOFF_DETECT	0x1
+/* Indicates whether chip saw an incoming XOFF char  */
+#define UART_17158_XON_DETECT	0x2
+/* Indicates whether chip saw an incoming XON char */
 
 #define UART_17158_IER_RSVD1	0x10	/* Reserved by Exar */
 #define UART_17158_IER_XOFF	0x20	/* Xoff Interrupt Enable */
diff --git a/drivers/staging/dgnc/dgnc_pci.h b/drivers/staging/dgnc/dgnc_pci.h
index 617d40d..4e170c4 100644
--- a/drivers/staging/dgnc/dgnc_pci.h
+++ b/drivers/staging/dgnc/dgnc_pci.h
@@ -59,7 +59,6 @@
 #define PCI_DEVICE_NEO_EXPRESS_8RJ45_PCI_NAME	"Neo 8 PCI Express RJ45"
 #define PCI_DEVICE_NEO_EXPRESS_4_IBM_PCI_NAME	"Neo 4 PCI Express IBM"
 
-
 /* Size of Memory and I/O for PCI (4 K) */
 #define PCI_RAM_SIZE				0x1000
 
diff --git a/drivers/staging/dgnc/dgnc_sysfs.c b/drivers/staging/dgnc/dgnc_sysfs.c
index 74a0725..6600b0b 100644
--- a/drivers/staging/dgnc/dgnc_sysfs.c
+++ b/drivers/staging/dgnc/dgnc_sysfs.c
@@ -33,7 +33,7 @@ static DRIVER_ATTR(version, S_IRUSR, dgnc_driver_version_show, NULL);
 
 static ssize_t dgnc_driver_boards_show(struct device_driver *ddp, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", dgnc_NumBoards);
+	return snprintf(buf, PAGE_SIZE, "%d\n", dgnc_num_boards);
 }
 static DRIVER_ATTR(boards, S_IRUSR, dgnc_driver_boards_show, NULL);
 
@@ -91,18 +91,6 @@ void dgnc_remove_driver_sysfiles(struct pci_driver *dgnc_driver)
 	driver_remove_file(driverfs, &driver_attr_pollrate);
 }
 
-#define DGNC_VERIFY_BOARD(p, bd)				\
-	do {							\
-		if (!p)						\
-			return 0;				\
-								\
-		bd = dev_get_drvdata(p);			\
-		if (!bd || bd->magic != DGNC_BOARD_MAGIC)	\
-			return 0;				\
-		if (bd->state != BOARD_READY)			\
-			return 0;				\
-	} while (0)
-
 static ssize_t dgnc_vpd_show(struct device *p, struct device_attribute *attr,
 			     char *buf)
 {
@@ -110,7 +98,16 @@ static ssize_t dgnc_vpd_show(struct device *p, struct device_attribute *attr,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	count += sprintf(buf + count,
 		"\n      0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F");
@@ -131,7 +128,16 @@ static ssize_t dgnc_serial_number_show(struct device *p,
 	struct dgnc_board *bd;
 	int count = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	if (bd->serial_num[0] == '\0')
 		count += sprintf(buf + count, "<UNKNOWN>\n");
@@ -149,7 +155,16 @@ static ssize_t dgnc_ports_state_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	for (i = 0; i < bd->nasync; i++) {
 		count += snprintf(buf + count, PAGE_SIZE - count,
@@ -167,7 +182,16 @@ static ssize_t dgnc_ports_baud_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	for (i = 0; i < bd->nasync; i++) {
 		count +=  snprintf(buf + count, PAGE_SIZE - count,
@@ -186,19 +210,34 @@ static ssize_t dgnc_ports_msignals_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	for (i = 0; i < bd->nasync; i++) {
 		if (bd->channels[i]->ch_open_count) {
 			count += snprintf(buf + count, PAGE_SIZE - count,
 				"%d %s %s %s %s %s %s\n",
 				bd->channels[i]->ch_portnum,
-				(bd->channels[i]->ch_mostat & UART_MCR_RTS) ? "RTS" : "",
-				(bd->channels[i]->ch_mistat & UART_MSR_CTS) ? "CTS" : "",
-				(bd->channels[i]->ch_mostat & UART_MCR_DTR) ? "DTR" : "",
-				(bd->channels[i]->ch_mistat & UART_MSR_DSR) ? "DSR" : "",
-				(bd->channels[i]->ch_mistat & UART_MSR_DCD) ? "DCD" : "",
-				(bd->channels[i]->ch_mistat & UART_MSR_RI)  ? "RI"  : "");
+				(bd->channels[i]->ch_mostat & UART_MCR_RTS)
+						? "RTS" : "",
+				(bd->channels[i]->ch_mistat & UART_MSR_CTS)
+						? "CTS" : "",
+				(bd->channels[i]->ch_mostat & UART_MCR_DTR)
+						? "DTR" : "",
+				(bd->channels[i]->ch_mistat & UART_MSR_DSR)
+						? "DSR" : "",
+				(bd->channels[i]->ch_mistat & UART_MSR_DCD)
+						? "DCD" : "",
+				(bd->channels[i]->ch_mistat & UART_MSR_RI)
+						? "RI"  : "");
 		} else {
 			count += snprintf(buf + count, PAGE_SIZE - count,
 				"%d\n", bd->channels[i]->ch_portnum);
@@ -215,8 +254,16 @@ static ssize_t dgnc_ports_iflag_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
 
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 	for (i = 0; i < bd->nasync; i++) {
 		count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n",
 			bd->channels[i]->ch_portnum,
@@ -233,7 +280,16 @@ static ssize_t dgnc_ports_cflag_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	for (i = 0; i < bd->nasync; i++) {
 		count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n",
@@ -251,7 +307,16 @@ static ssize_t dgnc_ports_oflag_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	for (i = 0; i < bd->nasync; i++) {
 		count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n",
@@ -269,7 +334,16 @@ static ssize_t dgnc_ports_lflag_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	for (i = 0; i < bd->nasync; i++) {
 		count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n",
@@ -288,7 +362,16 @@ static ssize_t dgnc_ports_digi_flag_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	for (i = 0; i < bd->nasync; i++) {
 		count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n",
@@ -306,7 +389,16 @@ static ssize_t dgnc_ports_rxcount_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	for (i = 0; i < bd->nasync; i++) {
 		count += snprintf(buf + count, PAGE_SIZE - count, "%d %ld\n",
@@ -324,7 +416,16 @@ static ssize_t dgnc_ports_txcount_show(struct device *p,
 	int count = 0;
 	int i = 0;
 
-	DGNC_VERIFY_BOARD(p, bd);
+	do {
+		if (!p)
+			return 0;
+
+		bd = dev_get_drvdata(p);
+		if (!bd || bd->magic != DGNC_BOARD_MAGIC)
+			return 0;
+		if (bd->state != BOARD_READY)
+			return 0;
+	} while (0);
 
 	for (i = 0; i < bd->nasync; i++) {
 		count += snprintf(buf + count, PAGE_SIZE - count, "%d %ld\n",
diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
index 48e4b90..53976c0 100644
--- a/drivers/staging/dgnc/dgnc_tty.c
+++ b/drivers/staging/dgnc/dgnc_tty.c
@@ -45,8 +45,8 @@
 /*
  * internal variables
  */
-static struct dgnc_board	*dgnc_BoardsByMajor[256];
-static unsigned char		*dgnc_TmpWriteBuf;
+static struct dgnc_board	*dgnc_boards_by_major[256];
+static unsigned char		*dgnc_tmp_write_buf;
 
 /*
  * Default transparent print information.
@@ -70,7 +70,7 @@ static struct digi_t dgnc_digi_init = {
  * This defines a raw port at 9600 baud, 8 data bits, no parity,
  * 1 stop bit.
  */
-static struct ktermios DgncDefaultTermios = {
+static struct ktermios dgnc_default_termios = {
 	.c_iflag =	(DEFAULT_IFLAGS),	/* iflags */
 	.c_oflag =	(DEFAULT_OFLAGS),	/* oflags */
 	.c_cflag =	(DEFAULT_CFLAGS),	/* cflags */
@@ -161,9 +161,9 @@ int dgnc_tty_preinit(void)
 	 * is only called during module load, (not in interrupt context),
 	 * and with no locks held.
 	 */
-	dgnc_TmpWriteBuf = kmalloc(WRITEBUFLEN, GFP_KERNEL);
+	dgnc_tmp_write_buf = kmalloc(WRITEBUFLEN, GFP_KERNEL);
 
-	if (!dgnc_TmpWriteBuf)
+	if (!dgnc_tmp_write_buf)
 		return -ENOMEM;
 
 	return 0;
@@ -178,20 +178,21 @@ int dgnc_tty_register(struct dgnc_board *brd)
 {
 	int rc = 0;
 
-	brd->SerialDriver.magic = TTY_DRIVER_MAGIC;
-
-	snprintf(brd->SerialName, MAXTTYNAMELEN, "tty_dgnc_%d_", brd->boardnum);
-
-	brd->SerialDriver.name = brd->SerialName;
-	brd->SerialDriver.name_base = 0;
-	brd->SerialDriver.major = 0;
-	brd->SerialDriver.minor_start = 0;
-	brd->SerialDriver.num = brd->maxports;
-	brd->SerialDriver.type = TTY_DRIVER_TYPE_SERIAL;
-	brd->SerialDriver.subtype = SERIAL_TYPE_NORMAL;
-	brd->SerialDriver.init_termios = DgncDefaultTermios;
-	brd->SerialDriver.driver_name = DRVSTR;
-	brd->SerialDriver.flags = (TTY_DRIVER_REAL_RAW |
+	brd->serial_driver.magic = TTY_DRIVER_MAGIC;
+
+	snprintf(brd->serial_name, MAXTTYNAMELEN,
+			 "tty_dgnc_%d_", brd->boardnum);
+
+	brd->serial_driver.name = brd->serial_name;
+	brd->serial_driver.name_base = 0;
+	brd->serial_driver.major = 0;
+	brd->serial_driver.minor_start = 0;
+	brd->serial_driver.num = brd->maxports;
+	brd->serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
+	brd->serial_driver.subtype = SERIAL_TYPE_NORMAL;
+	brd->serial_driver.init_termios = dgnc_default_termios;
+	brd->serial_driver.driver_name = DRVSTR;
+	brd->serial_driver.flags = (TTY_DRIVER_REAL_RAW |
 				   TTY_DRIVER_DYNAMIC_DEV |
 				   TTY_DRIVER_HARDWARE_BREAK);
 
@@ -199,34 +200,34 @@ int dgnc_tty_register(struct dgnc_board *brd)
 	 * The kernel wants space to store pointers to
 	 * tty_struct's and termios's.
 	 */
-	brd->SerialDriver.ttys = kcalloc(brd->maxports,
-					 sizeof(*brd->SerialDriver.ttys),
+	brd->serial_driver.ttys = kcalloc(brd->maxports,
+					 sizeof(*brd->serial_driver.ttys),
 					 GFP_KERNEL);
-	if (!brd->SerialDriver.ttys)
+	if (!brd->serial_driver.ttys)
 		return -ENOMEM;
 
-	kref_init(&brd->SerialDriver.kref);
-	brd->SerialDriver.termios = kcalloc(brd->maxports,
-					    sizeof(*brd->SerialDriver.termios),
+	kref_init(&brd->serial_driver.kref);
+	brd->serial_driver.termios = kcalloc(brd->maxports,
+					    sizeof(*brd->serial_driver.termios),
 					    GFP_KERNEL);
-	if (!brd->SerialDriver.termios)
+	if (!brd->serial_driver.termios)
 		return -ENOMEM;
 
 	/*
 	 * Entry points for driver.  Called by the kernel from
 	 * tty_io.c and n_tty.c.
 	 */
-	tty_set_operations(&brd->SerialDriver, &dgnc_tty_ops);
+	tty_set_operations(&brd->serial_driver, &dgnc_tty_ops);
 
-	if (!brd->dgnc_Major_Serial_Registered) {
+	if (!brd->dgnc_major_serial_registered) {
 		/* Register tty devices */
-		rc = tty_register_driver(&brd->SerialDriver);
+		rc = tty_register_driver(&brd->serial_driver);
 		if (rc < 0) {
 			dev_dbg(&brd->pdev->dev,
 				"Can't register tty device (%d)\n", rc);
 			return rc;
 		}
-		brd->dgnc_Major_Serial_Registered = true;
+		brd->dgnc_major_serial_registered = true;
 	}
 
 	/*
@@ -234,19 +235,19 @@ int dgnc_tty_register(struct dgnc_board *brd)
 	 * again, separately so we don't get the LD confused about what major
 	 * we are when we get into the dgnc_tty_open() routine.
 	 */
-	brd->PrintDriver.magic = TTY_DRIVER_MAGIC;
-	snprintf(brd->PrintName, MAXTTYNAMELEN, "pr_dgnc_%d_", brd->boardnum);
-
-	brd->PrintDriver.name = brd->PrintName;
-	brd->PrintDriver.name_base = 0;
-	brd->PrintDriver.major = brd->SerialDriver.major;
-	brd->PrintDriver.minor_start = 0x80;
-	brd->PrintDriver.num = brd->maxports;
-	brd->PrintDriver.type = TTY_DRIVER_TYPE_SERIAL;
-	brd->PrintDriver.subtype = SERIAL_TYPE_NORMAL;
-	brd->PrintDriver.init_termios = DgncDefaultTermios;
-	brd->PrintDriver.driver_name = DRVSTR;
-	brd->PrintDriver.flags = (TTY_DRIVER_REAL_RAW |
+	brd->print_driver.magic = TTY_DRIVER_MAGIC;
+	snprintf(brd->print_name, MAXTTYNAMELEN, "pr_dgnc_%d_", brd->boardnum);
+
+	brd->print_driver.name = brd->print_name;
+	brd->print_driver.name_base = 0;
+	brd->print_driver.major = brd->serial_driver.major;
+	brd->print_driver.minor_start = 0x80;
+	brd->print_driver.num = brd->maxports;
+	brd->print_driver.type = TTY_DRIVER_TYPE_SERIAL;
+	brd->print_driver.subtype = SERIAL_TYPE_NORMAL;
+	brd->print_driver.init_termios = dgnc_default_termios;
+	brd->print_driver.driver_name = DRVSTR;
+	brd->print_driver.flags = (TTY_DRIVER_REAL_RAW |
 				  TTY_DRIVER_DYNAMIC_DEV |
 				  TTY_DRIVER_HARDWARE_BREAK);
 
@@ -255,39 +256,39 @@ int dgnc_tty_register(struct dgnc_board *brd)
 	 * tty_struct's and termios's.  Must be separated from
 	 * the Serial Driver so we don't get confused
 	 */
-	brd->PrintDriver.ttys = kcalloc(brd->maxports,
-					sizeof(*brd->PrintDriver.ttys),
+	brd->print_driver.ttys = kcalloc(brd->maxports,
+					sizeof(*brd->print_driver.ttys),
 					GFP_KERNEL);
-	if (!brd->PrintDriver.ttys)
+	if (!brd->print_driver.ttys)
 		return -ENOMEM;
-	kref_init(&brd->PrintDriver.kref);
-	brd->PrintDriver.termios = kcalloc(brd->maxports,
-					   sizeof(*brd->PrintDriver.termios),
+	kref_init(&brd->print_driver.kref);
+	brd->print_driver.termios = kcalloc(brd->maxports,
+					   sizeof(*brd->print_driver.termios),
 					   GFP_KERNEL);
-	if (!brd->PrintDriver.termios)
+	if (!brd->print_driver.termios)
 		return -ENOMEM;
 
 	/*
 	 * Entry points for driver.  Called by the kernel from
 	 * tty_io.c and n_tty.c.
 	 */
-	tty_set_operations(&brd->PrintDriver, &dgnc_tty_ops);
+	tty_set_operations(&brd->print_driver, &dgnc_tty_ops);
 
-	if (!brd->dgnc_Major_TransparentPrint_Registered) {
+	if (!brd->dgnc_major_transparent_print_registered) {
 		/* Register Transparent Print devices */
-		rc = tty_register_driver(&brd->PrintDriver);
+		rc = tty_register_driver(&brd->print_driver);
 		if (rc < 0) {
 			dev_dbg(&brd->pdev->dev,
 				"Can't register Transparent Print device(%d)\n",
 				rc);
 			return rc;
 		}
-		brd->dgnc_Major_TransparentPrint_Registered = true;
+		brd->dgnc_major_transparent_print_registered = true;
 	}
 
-	dgnc_BoardsByMajor[brd->SerialDriver.major] = brd;
-	brd->dgnc_Serial_Major = brd->SerialDriver.major;
-	brd->dgnc_TransparentPrint_Major = brd->PrintDriver.major;
+	dgnc_boards_by_major[brd->serial_driver.major] = brd;
+	brd->dgnc_serial_major = brd->serial_driver.major;
+	brd->dgnc_transparent_print_major = brd->print_driver.major;
 
 	return rc;
 }
@@ -364,12 +365,12 @@ int dgnc_tty_init(struct dgnc_board *brd)
 		{
 			struct device *classp;
 
-			classp = tty_register_device(&brd->SerialDriver, i,
+			classp = tty_register_device(&brd->serial_driver, i,
 						     &ch->ch_bd->pdev->dev);
 			ch->ch_tun.un_sysfs = classp;
 			dgnc_create_tty_sysfs(&ch->ch_tun, classp);
 
-			classp = tty_register_device(&brd->PrintDriver, i,
+			classp = tty_register_device(&brd->print_driver, i,
 						     &ch->ch_bd->pdev->dev);
 			ch->ch_pun.un_sysfs = classp;
 			dgnc_create_tty_sysfs(&ch->ch_pun, classp);
@@ -393,8 +394,8 @@ err_free_channels:
  */
 void dgnc_tty_post_uninit(void)
 {
-	kfree(dgnc_TmpWriteBuf);
-	dgnc_TmpWriteBuf = NULL;
+	kfree(dgnc_tmp_write_buf);
+	dgnc_tmp_write_buf = NULL;
 }
 
 /*
@@ -407,40 +408,40 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
 {
 	int i = 0;
 
-	if (brd->dgnc_Major_Serial_Registered) {
-		dgnc_BoardsByMajor[brd->SerialDriver.major] = NULL;
-		brd->dgnc_Serial_Major = 0;
+	if (brd->dgnc_major_serial_registered) {
+		dgnc_boards_by_major[brd->serial_driver.major] = NULL;
+		brd->dgnc_serial_major = 0;
 		for (i = 0; i < brd->nasync; i++) {
 			if (brd->channels[i])
 				dgnc_remove_tty_sysfs(brd->channels[i]->
 						      ch_tun.un_sysfs);
-			tty_unregister_device(&brd->SerialDriver, i);
+			tty_unregister_device(&brd->serial_driver, i);
 		}
-		tty_unregister_driver(&brd->SerialDriver);
-		brd->dgnc_Major_Serial_Registered = false;
+		tty_unregister_driver(&brd->serial_driver);
+		brd->dgnc_major_serial_registered = false;
 	}
 
-	if (brd->dgnc_Major_TransparentPrint_Registered) {
-		dgnc_BoardsByMajor[brd->PrintDriver.major] = NULL;
-		brd->dgnc_TransparentPrint_Major = 0;
+	if (brd->dgnc_major_transparent_print_registered) {
+		dgnc_boards_by_major[brd->print_driver.major] = NULL;
+		brd->dgnc_transparent_print_major = 0;
 		for (i = 0; i < brd->nasync; i++) {
 			if (brd->channels[i])
 				dgnc_remove_tty_sysfs(brd->channels[i]->
 						      ch_pun.un_sysfs);
-			tty_unregister_device(&brd->PrintDriver, i);
+			tty_unregister_device(&brd->print_driver, i);
 		}
-		tty_unregister_driver(&brd->PrintDriver);
-		brd->dgnc_Major_TransparentPrint_Registered = false;
+		tty_unregister_driver(&brd->print_driver);
+		brd->dgnc_major_transparent_print_registered = false;
 	}
 
-	kfree(brd->SerialDriver.ttys);
-	brd->SerialDriver.ttys = NULL;
-	kfree(brd->SerialDriver.termios);
-	brd->SerialDriver.termios = NULL;
-	kfree(brd->PrintDriver.ttys);
-	brd->PrintDriver.ttys = NULL;
-	kfree(brd->PrintDriver.termios);
-	brd->PrintDriver.termios = NULL;
+	kfree(brd->serial_driver.ttys);
+	brd->serial_driver.ttys = NULL;
+	kfree(brd->serial_driver.termios);
+	brd->serial_driver.termios = NULL;
+	kfree(brd->print_driver.ttys);
+	brd->print_driver.ttys = NULL;
+	kfree(brd->print_driver.termios);
+	brd->print_driver.termios = NULL;
 }
 
 /*=======================================================================
@@ -448,10 +449,11 @@ void dgnc_tty_uninit(struct dgnc_board *brd)
  *	dgnc_wmove - Write data to transmit queue.
  *
  *		ch	- Pointer to channel structure.
- *		buf	- Poiter to characters to be moved.
+ *		buf	- Pointer to characters to be moved.
  *		n	- Number of characters to move.
  *
- *=======================================================================*/
+ *=======================================================================
+ */
 static void dgnc_wmove(struct channel_t *ch, char *buf, uint n)
 {
 	int	remain;
@@ -489,13 +491,14 @@ static void dgnc_wmove(struct channel_t *ch, char *buf, uint n)
 	ch->ch_w_head = head;
 }
 
-/*=======================================================================
+/*==================================================================
  *
  *      dgnc_input - Process received data.
  *
  *	      ch      - Pointer to channel structure.
  *
- *=======================================================================*/
+ *==================================================================
+ */
 void dgnc_input(struct channel_t *ch)
 {
 	struct dgnc_board *bd;
@@ -1029,7 +1032,7 @@ static int dgnc_tty_open(struct tty_struct *tty, struct file *file)
 		return -ENXIO;
 
 	/* Get board pointer from our array of majors we have allocated */
-	brd = dgnc_BoardsByMajor[major];
+	brd = dgnc_boards_by_major[major];
 	if (!brd)
 		return -ENXIO;
 
@@ -1619,7 +1622,7 @@ static int dgnc_tty_write_room(struct tty_struct *tty)
 	int ret = 0;
 	unsigned long flags;
 
-	if (!tty || !dgnc_TmpWriteBuf)
+	if (!tty || !dgnc_tmp_write_buf)
 		return 0;
 
 	un = tty->driver_data;
@@ -1698,7 +1701,7 @@ static int dgnc_tty_write(struct tty_struct *tty,
 	ushort tmask;
 	uint remain;
 
-	if (!tty || !dgnc_TmpWriteBuf)
+	if (!tty || !dgnc_tmp_write_buf)
 		return 0;
 
 	un = tty->driver_data;
@@ -2520,12 +2523,12 @@ static void dgnc_tty_flush_buffer(struct tty_struct *tty)
 	/* Flush UARTs transmit FIFO */
 	ch->ch_bd->bd_ops->flush_uart_write(ch);
 
-	if (ch->ch_tun.un_flags & (UN_LOW|UN_EMPTY)) {
-		ch->ch_tun.un_flags &= ~(UN_LOW|UN_EMPTY);
+	if (ch->ch_tun.un_flags & (UN_LOW | UN_EMPTY)) {
+		ch->ch_tun.un_flags &= ~(UN_LOW | UN_EMPTY);
 		wake_up_interruptible(&ch->ch_tun.un_flags_wait);
 	}
-	if (ch->ch_pun.un_flags & (UN_LOW|UN_EMPTY)) {
-		ch->ch_pun.un_flags &= ~(UN_LOW|UN_EMPTY);
+	if (ch->ch_pun.un_flags & (UN_LOW | UN_EMPTY)) {
+		ch->ch_pun.un_flags &= ~(UN_LOW | UN_EMPTY);
 		wake_up_interruptible(&ch->ch_pun.un_flags_wait);
 	}
 
@@ -2717,15 +2720,15 @@ static int dgnc_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
 				ch->ch_w_head = ch->ch_w_tail;
 				ch->ch_bd->bd_ops->flush_uart_write(ch);
 
-				if (ch->ch_tun.un_flags & (UN_LOW|UN_EMPTY)) {
+				if (ch->ch_tun.un_flags & (UN_LOW | UN_EMPTY)) {
 					ch->ch_tun.un_flags &=
-						~(UN_LOW|UN_EMPTY);
+						~(UN_LOW | UN_EMPTY);
 					wake_up_interruptible(&ch->ch_tun.un_flags_wait);
 				}
 
-				if (ch->ch_pun.un_flags & (UN_LOW|UN_EMPTY)) {
+				if (ch->ch_pun.un_flags & (UN_LOW | UN_EMPTY)) {
 					ch->ch_pun.un_flags &=
-						~(UN_LOW|UN_EMPTY);
+						~(UN_LOW | UN_EMPTY);
 					wake_up_interruptible(&ch->ch_pun.un_flags_wait);
 				}
 			}
@@ -2957,7 +2960,7 @@ static int dgnc_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
 		 * Figure out how much data the RealPort Server believes should
 		 * be in our TX queue.
 		 */
-		tdist = (buf.tIn - buf.tOut) & 0xffff;
+		tdist = (buf.t_in - buf.t_out) & 0xffff;
 
 		/*
 		 * If we have more data than the RealPort Server believes we
diff --git a/drivers/staging/dgnc/digi.h b/drivers/staging/dgnc/digi.h
index cf9dcae..701312f 100644
--- a/drivers/staging/dgnc/digi.h
+++ b/drivers/staging/dgnc/digi.h
@@ -31,21 +31,21 @@
 #endif
 
 #if !defined(TIOCMSET)
-#define	TIOCMSET	(('d'<<8) | 252)	/* set modem ctrl state	*/
-#define	TIOCMGET	(('d'<<8) | 253)	/* set modem ctrl state	*/
+#define	TIOCMSET	(('d' << 8) | 252)	/* set modem ctrl state	*/
+#define	TIOCMGET	(('d' << 8) | 253)	/* set modem ctrl state	*/
 #endif
 
 #if !defined(TIOCMBIC)
-#define	TIOCMBIC	(('d'<<8) | 254)	/* set modem ctrl state */
-#define	TIOCMBIS	(('d'<<8) | 255)	/* set modem ctrl state */
+#define	TIOCMBIC	(('d' << 8) | 254)	/* set modem ctrl state */
+#define	TIOCMBIS	(('d' << 8) | 255)	/* set modem ctrl state */
 #endif
 
-#define DIGI_GETA	(('e'<<8) | 94)		/* Read params		*/
-#define DIGI_SETA	(('e'<<8) | 95)		/* Set params		*/
-#define DIGI_SETAW	(('e'<<8) | 96)		/* Drain & set params	*/
-#define DIGI_SETAF	(('e'<<8) | 97)		/* Drain, flush & set params */
-#define DIGI_GET_NI_INFO (('d'<<8) | 250) /* Non-intelligent state info */
-#define DIGI_LOOPBACK (('d'<<8) | 252) /*
+#define DIGI_GETA	(('e' << 8) | 94)	/* Read params		*/
+#define DIGI_SETA	(('e' << 8) | 95)	/* Set params		*/
+#define DIGI_SETAW	(('e' << 8) | 96)	/* Drain & set params	*/
+#define DIGI_SETAF	(('e' << 8) | 97)	/* Drain, flush & set params */
+#define DIGI_GET_NI_INFO (('d' << 8) | 250) /* Non-intelligent state info */
+#define DIGI_LOOPBACK (('d' << 8) | 252) /*
 					* Enable/disable UART
 					* internal loopback
 					*/
@@ -85,7 +85,7 @@ struct digi_dinfo {
 	char		dinfo_version[16];	/* driver version       */
 };
 
-#define	DIGI_GETDD	(('d'<<8) | 248)	/* get driver info      */
+#define	DIGI_GETDD	(('d' << 8) | 248)	/* get driver info      */
 
 /************************************************************************
  * Structure used with ioctl commands for per-board information
@@ -94,10 +94,10 @@ struct digi_dinfo {
  ************************************************************************/
 struct digi_info {
 	unsigned int	info_bdnum;		/* Board number (0 based)  */
-	unsigned int	info_ioport;		/* io port address         */
-	unsigned int	info_physaddr;		/* memory address          */
-	unsigned int	info_physsize;		/* Size of host mem window */
-	unsigned int	info_memsize;		/* Amount of dual-port mem */
+	unsigned int	info_ioport;	/* io port address         */
+	unsigned int	info_physaddr;	/* memory address          */
+	unsigned int	info_physsize;	/* Size of host mem window */
+	unsigned int	info_memsize;	/* Amount of dual-port mem */
 						/* on board                */
 	unsigned short	info_bdtype;		/* Board type              */
 	unsigned short	info_nports;		/* number of ports         */
@@ -105,12 +105,12 @@ struct digi_info {
 	char		info_reserved[7];	/* for future expansion    */
 };
 
-#define	DIGI_GETBD	(('d'<<8) | 249)	/* get board info          */
+#define	DIGI_GETBD	(('d' << 8) | 249)	/* get board info          */
 
 struct digi_getbuffer /* Struct for holding buffer use counts */
 {
-	unsigned long tIn;
-	unsigned long tOut;
+	unsigned long t_in;
+	unsigned long t_out;
 	unsigned long rxbuf;
 	unsigned long txbuf;
 	unsigned long txdone;
@@ -133,10 +133,10 @@ struct digi_getcounter {
 #define DIGI_SETCUSTOMBAUD _IOW('e', 106, int)	/* Set integer baud rate */
 #define DIGI_GETCUSTOMBAUD _IOR('e', 107, int)	/* Get integer baud rate */
 
-#define DIGI_REALPORT_GETBUFFERS (('e'<<8) | 108)
-#define DIGI_REALPORT_SENDIMMEDIATE (('e'<<8) | 109)
-#define DIGI_REALPORT_GETCOUNTERS (('e'<<8) | 110)
-#define DIGI_REALPORT_GETEVENTS (('e'<<8) | 111)
+#define DIGI_REALPORT_GETBUFFERS (('e' << 8) | 108)
+#define DIGI_REALPORT_SENDIMMEDIATE (('e' << 8) | 109)
+#define DIGI_REALPORT_GETCOUNTERS (('e' << 8) | 110)
+#define DIGI_REALPORT_GETEVENTS (('e' << 8) | 111)
 
 #define EV_OPU 0x0001 /* !<Output paused by client */
 #define EV_OPS 0x0002 /* !<Output paused by reqular sw flowctrl */
-- 
2.5.0