From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Allwinner DT changes for 4.5
Date: Mon, 14 Dec 2015 13:53:48 +0100 [thread overview]
Message-ID: <20151214125348.GA28370@lukather> (raw)
Hi,
Here is a bunch of DT changes for the Allwinner SoCs for the 4.5 merge
window.
Maxime
The following changes since commit 8005c49d9aea74d382f474ce11afbbc7d7130bec:
Linux 4.4-rc1 (2015-11-15 17:00:27 -0800)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.5
for you to fetch changes up to 2367cee5fda1e9ebc605b13175492b31030acd9d:
ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket) (2015-12-11 09:21:29 +0100)
----------------------------------------------------------------
Allwinner DT changes for 4.5
Allwinner device-tree related patches for the 4.5 merge window.
* Support for the H3
* Addition of the RSB to the relevant devices (sun8i, sun9i)
* Addition of the Video Engine clocks for the older SoCs (sun4i, sun7i)
* Addition of the DRAM gates for the older SoCs (sun4i, sun7i)
* Addition of the audio codec to a bunch of boards
* New board: ICNova SWAC
----------------------------------------------------------------
Adam Sampson (1):
ARM: sun7i: dt: Enable audio codec on pcDuino V3 Nano
Aleksei Mamlin (1):
ARM: dts: sun7i: Enable audio codec on Wexler TAB7200 tablet.
Chen-Yu Tsai (17):
ARM: dts: sun8i: Add simplefb node labels to reference at board level
ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes
ARM: dts: sun9i: Add TODO comments for the main and low power clocks
ARM: dts: sun9i: Add A80 R_PIO pin controller device node
ARM: dts: sun9i: optimus: Enable LED3
ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings
ARM: dts: sun9i: optimus: Enable consumer IR receiver
ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi
ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller
ARM: dts: sun9i: Add NMI controller device node
ARM: dts: sun4i: Add DRAM gates
ARM: dts: sun7i: Add DRAM gates
ARM: dts: sun4i: Add VE (Video Engine) module clock node
ARM: dts: sun7i: Add VE (Video Engine) module clock node
ARM: dts: sun9i: cubieboard4: Enable LEDs
ARM: dts: sun9i: cubieboard4: Enable consumer IR receiver
ARM: dts: sun9i: cubieboard4: Enable Reduced Serial Bus controller
Hans de Goede (7):
ARM: dts: sun4i: inet9f-rev03: Add support for game buttons / joysticks
ARM: dts: sun4i: Enable onboard codec used on the iNet1 tablet
ARM: dts: sun4i: Add backlight node to iNet1 tablet
ARM: dts: sun5i: Add backlight node to UTOO P66 tablet
ARM: dts: sun4i: Add backlight node to pov protab2 ips9 tablet
ARM: dts: sun4i: Add touchscreen node to iNet1 tablet
ARM: dts: sun4i: Add touchscreen node to pov protab2-ips9 tablet
Jelle van der Waa (1):
ARM: dts: sun7i: Enable audio codec on pcDuino
Jens Kuske (2):
ARM: dts: sunxi: Add Allwinner H3 DTSI
ARM: dts: sun8i: Add Orange Pi Plus support
Karsten Merker (2):
ARM: dts: sun7i: Olimex A20-SOM-EVB: Add LRADC keys
ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket)
Lawrence Yu (1):
dts: sun6i: yones toptech bs1078 v2: Add AXP221 support to dts
Marcus Weseloh (1):
ARM: dts: sun4i: Enable audio codec on Olimex A20-SOM-EVB
Michael van Slingerland (1):
ARM: dts: sun5i: Add i2c axp152 pmic support for Auxtek T004 boards
Priit Laes (3):
ARM: dts: sun4i: gemei-g9: Convert to use axp209 regulator nodes
ARM: dts: sun4i: gemei-g9: Use reg_ldo2 instead of reg_vcc3v0
ARM: dts: sun4i: gemei-g9: Enable sun4i audio codec support
Stefan Monnier (2):
ARM: dts: sun7i: Enable audio codec on OrangePi Mini
ARM: dts: sun7i: Enable audio codec on BananaPi
Stefan Roese (1):
arm: sun7i: Add sun7i-a20-icnova-swac.dts
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 42 +-
arch/arm/boot/dts/sun4i-a10-inet1.dts | 48 ++
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 164 +++++++
arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts | 47 ++
arch/arm/boot/dts/sun4i-a10.dtsi | 45 +-
arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 14 +
arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 16 +
.../dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 85 +++-
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 4 +
arch/arm/boot/dts/sun7i-a20-icnova-swac.dts | 169 +++++++
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 77 ++++
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 4 +
arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 4 +
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 4 +
arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 4 +
arch/arm/boot/dts/sun7i-a20.dtsi | 41 +-
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +-
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 77 ++++
arch/arm/boot/dts/sun8i-h3.dtsi | 497 +++++++++++++++++++++
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 30 ++
arch/arm/boot/dts/sun9i-a80-optimus.dts | 24 +-
arch/arm/boot/dts/sun9i-a80.dtsi | 159 ++++++-
23 files changed, 1536 insertions(+), 25 deletions(-)
create mode 100644 arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
create mode 100644 arch/arm/boot/dts/sun8i-h3.dtsi
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151214/d9f52156/attachment.sig>
next reply other threads:[~2015-12-14 12:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-14 12:53 Maxime Ripard [this message]
2015-12-22 19:29 ` [GIT PULL] Allwinner DT changes for 4.5 Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151214125348.GA28370@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.