From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: by yocto-www.yoctoproject.org (Postfix, from userid 118) id 42AC9E00B03; Tue, 15 Dec 2015 07:56:12 -0800 (PST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on yocto-www.yoctoproject.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 X-Spam-HAM-Report: * -5.0 RCVD_IN_DNSWL_HI RBL: Sender listed at http://www.dnswl.org/, high * trust * [192.94.94.41 listed in list.dnswl.org] * -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% * [score: 0.0000] Received: from bear.ext.ti.com (bear.ext.ti.com [192.94.94.41]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id 0C2AAE00863 for ; Tue, 15 Dec 2015 07:56:08 -0800 (PST) Received: from dflxv15.itg.ti.com ([128.247.5.124]) by bear.ext.ti.com (8.13.7/8.13.7) with ESMTP id tBFFu6UI010232; Tue, 15 Dec 2015 09:56:06 -0600 Received: from DFLE72.ent.ti.com (dfle72.ent.ti.com [128.247.5.109]) by dflxv15.itg.ti.com (8.14.3/8.13.8) with ESMTP id tBFFu6xM003390; Tue, 15 Dec 2015 09:56:06 -0600 Received: from dflp33.itg.ti.com (10.64.6.16) by DFLE72.ent.ti.com (128.247.5.109) with Microsoft SMTP Server id 14.3.224.2; Tue, 15 Dec 2015 09:56:06 -0600 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by dflp33.itg.ti.com (8.14.3/8.13.8) with ESMTP id tBFFu6F2011435; Tue, 15 Dec 2015 09:56:06 -0600 Date: Tue, 15 Dec 2015 10:55:50 -0500 From: Denys Dmytriyenko To: Joshua Vanderpool Message-ID: <20151215155550.GC23133@edge> References: MIME-Version: 1.0 In-Reply-To: User-Agent: Mutt/1.5.20 (2009-06-14) Cc: meta-ti@yoctoproject.org Subject: Re: Kernel Boot Issue? hsmmc X-BeenThere: meta-ti@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Usage and development list for the meta-ti layer List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 15 Dec 2015 15:56:12 -0000 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable This is not the right list for this question - try http://e2e.ti.com --=20 Denys On Mon, Dec 14, 2015 at 01:21:18PM -0500, Joshua Vanderpool wrote: > I have a custom Board based on the am57xx like the x15. > I have successful u-boot working and the kernel starts however it freezes > and keeps stating something about the hsmmc. I updated the dts to mimic > the x15 but still have s similar issue. >=20 > Is there any other clues to the issue at hand from this capture? >=20 > Best Regards, > Josh >=20 > U-Boot SPL 2015.07 (Dec 10 2015 - 10:08:12) > DRA752 ES1.1 >=20 >=20 > U-Boot 2015.07 (Dec 10 2015 - 10:08:12 -0500) >=20 > CPU : DRA752 ES1.1 > Board: Raymond GDM > I2C: ready > DRAM: 2 GiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Card did not respond to voltage select! > ** Bad device mmc 0 ** > Using default environment >=20 > Net: Net Initialization Skipped > No ethernet found. > Hit any key to stop autoboot: 1 =08=08=08 0=20 > Boot fastboot requested, resetting dofastboot ... > Saving Environment to FAT... > Card did not respond to voltage select! > ** Bad device mmc 0 ** > Booting into fastboot ... > Unknown command 'fastboot' - try 'help' > gpio: pin 58 (gpio 58) value is 0 > ## Error: "envboot" not defined > Card did not respond to voltage select! > Card did not respond to voltage select! > switch to partitions #0, OK > mmc1(part 0) is current device > SD/MMC found on device 1 > reading uEnv.txt > ** Unable to read file uEnv.txt ** > reading /boot/zImage > 4355976 bytes read in 225 ms (18.5 MiB/s) > reading /boot/am57xx-raymond-gdm.dtb > 96053 bytes read in 12 ms (7.6 MiB/s) > Booting from mmc1 ... > Kernel image @ 0x82000000 [ 0x000000 - 0x427788 ] > ## Flattened Device Tree blob at 88000000 > Booting using the fdt blob at 0x88000000 > Loading Device Tree to 8ffe5000, end 8ffff734 ... OK >=20 > Starting kernel ... >=20 > [ 0.000000] Booting Linux on physical CPU 0x0 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 4.1.13-gf0f52afb60 (jvanderpool@jvanderpool-= workstation) (gcc version 4.9.3 20150413 (prerelease) (Linaro GCC 4.9-2015.= 05) ) #3 SMP PREEMPT Fri Dec 11 14:11:32 EST 2015 > [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=3D3= 0c5387d > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction = cache > [ 0.000000] Machine model: TI AM5728 Raymond-GDM > [ 0.000000] Reserved memory: unsupported node format, ignoring > [ 0.000000] cma: Reserved 24 MiB at 0x00000000fe400000 > [ 0.000000] Forcing write-allocate cache policy for SMP > [ 0.000000] Memory policy: Data cache writealloc > [ 0.000000] DRA752 ES1.1 > [ 0.000000] PERCPU: Embedded 13 pages/cpu @ee55e000 s22848 r8192 d2220= 8 u53248 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. To= tal pages: 521810 > [ 0.000000] Kernel command line: console=3DttyO2,115200n8 vram=3D16M r= oot=3DPARTUUID=3Dd3fe00ea-1ebf-584e-96c2-ca5488e60863 ro rootfstype=3Dext4 = rootwait > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 = bytes) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 by= tes) > [ 0.000000] Memory: 2029968K/2094080K available (7827K kernel code, 74= 6K rwdata, 3220K rodata, 1124K init, 6629K bss, 39536K reserved, 24576K cma= -reserved, 1291264K highmem) > [ 0.000000] Virtual kernel memory layout: > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) > [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > [ 0.000000] .text : 0xc0008000 - 0xc0ad2024 (11049 kB) > [ 0.000000] .init : 0xc0ad3000 - 0xc0bec000 (1124 kB) > [ 0.000000] .data : 0xc0bec000 - 0xc0ca6960 ( 747 kB) > [ 0.000000] .bss : 0xc0ca9000 - 0xc1322568 (6630 kB) > [ 0.000000] SLUB: HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D2,= Nodes=3D1 > [ 0.000000] Preemptible hierarchical RCU implementation. > [ 0.000000] RCU debugfs-based tracing is enabled. > [ 0.000000] Additional per-CPU info printed with stalls. > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 > [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz > [ 0.000000] clocksource 32k_counter: mask: 0xffffffff max_cycles: 0xff= ffffff, max_idle_ns: 58327039986419 ns > [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps e= very 65535999984741ns > [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz > [ 0.000579] Architected cp15 timer(s) running at 6.14MHz (virt). > [ 0.000579] clocksource arch_sys_counter: mask: 0xffffffffffffff max_c= ycles: 0x16af5adb9, max_idle_ns: 440795202250 ns > [ 0.000615] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps ever= y 4398046511023ns > [ 0.000625] Switching to timer-based delay loop, resolution 162ns > [ 0.001303] Console: colour dummy device 80x30 > [ 0.001332] WARNING: Your 'console=3DttyO2' has been replaced by 'ttyS= 2' > [ 0.001338] This ensures that you still see kernel messages. Please > [ 0.001344] update your kernel commandline. > [ 0.001350] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc= =2E, Ingo Molnar > [ 0.001355] ... MAX_LOCKDEP_SUBCLASSES: 8 > [ 0.001361] ... MAX_LOCK_DEPTH: 48 > [ 0.001366] ... MAX_LOCKDEP_KEYS: 8191 > [ 0.001371] ... CLASSHASH_SIZE: 4096 > [ 0.001377] ... MAX_LOCKDEP_ENTRIES: 32768 > [ 0.001382] ... MAX_LOCKDEP_CHAINS: 65536 > [ 0.001387] ... CHAINHASH_SIZE: 32768 > [ 0.001393] memory used by lock dependency info: 5151 kB > [ 0.001399] per task-struct memory footprint: 1152 bytes > [ 0.055654] Calibrating delay loop (skipped), value calculated using t= imer frequency.. 12.29 BogoMIPS (lpj=3D61475) > [ 0.055672] pid_max: default: 32768 minimum: 301 > [ 0.056120] Security Framework initialized > [ 0.056354] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.056372] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 = bytes) > [ 0.059794] Initializing cgroup subsys blkio > [ 0.059823] Initializing cgroup subsys memory > [ 0.059947] Initializing cgroup subsys devices > [ 0.060001] Initializing cgroup subsys freezer > [ 0.060047] Initializing cgroup subsys perf_event > [ 0.060179] CPU: Testing write buffer coherency: ok > [ 0.061366] /cpus/cpu@0 missing clock-frequency property > [ 0.061419] /cpus/cpu@1 missing clock-frequency property > [ 0.061429] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 > [ 0.061603] Setting up static identity map for 0x800082c0 - 0x80008318 > [ 0.141768] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 > [ 0.141900] Brought up 2 CPUs > [ 0.141914] SMP: Total of 2 processors activated (24.59 BogoMIPS). > [ 0.141921] CPU: All CPU(s) started in SVC mode. > [ 0.143933] devtmpfs: initialized > [ 0.436594] VFP support v0.3: implementor 41 architecture 4 part 30 va= riant f rev 0 > [ 0.438364] omap_hwmod: l3_main_2 using broken dt data from ocp > [ 0.470366] omap_hwmod: tptc0 using broken dt data from edma-controller > [ 0.471518] omap_hwmod: tptc1 using broken dt data from edma-controller > [ 0.745838] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffff= ff, max_idle_ns: 19112604462750000 ns > [ 0.748250] pinctrl core: initialized pinctrl subsystem > [ 0.754780] NET: Registered protocol family 16 > [ 0.756684] DMA: preallocated 256 KiB pool for atomic coherent allocat= ions > [ 0.792114] cpuidle: using governor ladder > [ 0.822090] cpuidle: using governor menu > [ 0.858471] OMAP GPIO hardware version 0.1 > [ 0.895570] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pin= mux@1400 ! > [ 0.897742] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pin= mux@1400 ! > [ 0.899055] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pin= mux@1400 ! > [ 0.900308] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pin= mux@1400 ! > [ 0.991470] No ATAGs? > [ 0.991533] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watc= hpoint registers. > [ 0.991542] hw-breakpoint: maximum watchpoint size is 8 bytes. > [ 0.998181] omap4_sram_init:Unable to allocate sram needed to handle e= rrata I688 > [ 0.998191] omap4_sram_init:Unable to get sram pool needed to handle e= rrata I688 > [ 1.000627] OMAP DMA hardware revision 0.0 > [ 1.154359] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driv= er > [ 1.184716] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine d= river > [ 1.185690] reg-fixed-voltage fixedregulator@2: could not find pctldev= for node /ocp/l4@4a000000/scm@2000/pinmux@1400/wlan_pins_default, deferrin= g probe > [ 1.185813] reg-fixed-voltage fixedregulator@3: could not find pctldev= for node /ocp/l4@4a000000/scm@2000/pinmux@1400/wlan_rfsw_pins_default, def= erring probe > [ 1.197793] omap-iommu 40d01000.mmu: 40d01000.mmu registered > [ 1.198666] omap-iommu 40d02000.mmu: 40d02000.mmu registered > [ 1.199540] omap-iommu 58882000.mmu: 58882000.mmu registered > [ 1.200477] omap-iommu 55082000.mmu: 55082000.mmu registered > [ 1.201728] omap-iommu 41501000.mmu: 41501000.mmu registered > [ 1.202803] omap-iommu 41502000.mmu: 41502000.mmu registered > [ 1.204782] vgaarb: loaded > [ 1.208137] SCSI subsystem initialized > [ 1.210636] usbcore: registered new interface driver usbfs > [ 1.211227] usbcore: registered new interface driver hub > [ 1.211652] usbcore: registered new device driver usb > [ 1.213303] omap_i2c 48070000.i2c: could not find pctldev for node /oc= p/l4@4a000000/scm@2000/pinmux@1400/i2c1_pins_default, deferring probe > [ 1.213487] omap_i2c 48060000.i2c: could not find pctldev for node /oc= p/l4@4a000000/scm@2000/pinmux@1400/i2c3_pins_default, deferring probe > [ 1.213638] omap_i2c 4807a000.i2c: could not find pctldev for node /oc= p/l4@4a000000/scm@2000/pinmux@1400/i2c4_pins_default, deferring probe > [ 1.214014] media: Linux media interface: v0.10 > [ 1.214401] Linux video capture interface: v2.00 > [ 1.214661] pps_core: LinuxPPS API ver. 1 registered > [ 1.214668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolf= o Giometti > [ 1.214812] PTP clock support registered > [ 1.217303] omap-mailbox: probe of 48840000.mailbox failed with error = -22 > [ 1.217731] omap-mailbox: probe of 48842000.mailbox failed with error = -22 > [ 1.219586] Advanced Linux Sound Architecture Driver Initialized. > [ 1.225010] Bluetooth: Core ver 2.20 > [ 1.225187] NET: Registered protocol family 31 > [ 1.225194] Bluetooth: HCI device and connection manager initialized > [ 1.225259] Bluetooth: HCI socket layer initialized > [ 1.225301] Bluetooth: L2CAP socket layer initialized > [ 1.225471] Bluetooth: SCO socket layer initialized > [ 1.253934] DMA-API: preallocated 4096 debug entries > [ 1.253944] DMA-API: debugging enabled by kernel config > [ 1.254236] Switched to clocksource arch_sys_counter > [ 1.497119] NET: Registered protocol family 2 > [ 1.499379] TCP established hash table entries: 8192 (order: 3, 32768 = bytes) > [ 1.499539] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) > [ 1.500997] TCP: Hash tables configured (established 8192 bind 8192) > [ 1.501226] UDP hash table entries: 512 (order: 3, 40960 bytes) > [ 1.501438] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) > [ 1.502739] NET: Registered protocol family 1 > [ 1.504512] RPC: Registered named UNIX socket transport module. > [ 1.504522] RPC: Registered udp transport module. > [ 1.504529] RPC: Registered tcp transport module. > [ 1.504536] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 1.507843] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] > [ 1.507946] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7= counters available > [ 1.521019] futex hash table entries: 512 (order: 3, 32768 bytes) > [ 1.521384] audit: initializing netlink subsys (disabled) > [ 1.521592] audit: type=3D2000 audit(1.509:1): initialized > [ 1.639671] VFS: Disk quotas dquot_6.6.0 > [ 1.641900] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 b= ytes) > [ 1.673297] NFS: Registering the id_resolver key type > [ 1.673479] Key type id_resolver registered > [ 1.673487] Key type id_legacy registered > [ 1.673880] jffs2: version 2.2. (NAND) (SUMMARY) ?? 2001-2006 Red Hat= , Inc. > [ 1.696475] alg: No test for stdrng (krng) > [ 1.696560] NET: Registered protocol family 38 > [ 1.696860] bounce: pool size: 64 pages > [ 1.696913] io scheduler noop registered > [ 1.696951] io scheduler deadline registered > [ 1.697096] io scheduler cfq registered (default) > [ 1.712058] omap_hwmod: ocp2scp3: _wait_target_disable failed > [ 1.726249] pinctrl-single 4a003400.pinmux: 281 pins at pa fc003400 si= ze 1124 > [ 1.788412] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 > [ 1.788439] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] > [ 1.788461] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2ffff= fff] > [ 1.788484] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 1.788698] pci 0000:00:00.0: IOMMU is currently not supported for PCI > [ 1.790652] PCI: bus0: Fast back to back transfers disabled > [ 1.791734] PCI: bus1: Fast back to back transfers enabled > [ 1.791923] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fff= ff] > [ 1.791939] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ff= ff] > [ 1.792002] pci 0000:00:00.0: PCI bridge to [bus 01] > [ 1.795119] backlight supply power not found, using dummy regulator > [ 1.795458] /backlight: could not get #pwm-cells for /ocp/epwmss@48440= 000/ecap@48440100 > [ 1.795477] pwm-backlight backlight: unable to request PWM, trying leg= acy API > [ 1.800110] omapdss_dss 58000000.dss: master bind failed: -517 > [ 1.806346] panel-dpi display: failed to find video source > [ 1.821847] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled > [ 1.848210] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq =3D 299, ba= se_baud =3D 3000000) is a 8250 > [ 1.853565] console [ttyS2] disabled > [ 1.854035] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq =3D 300, ba= se_baud =3D 3000000) is a 8250 > [ 2.965394] console [ttyS2] enabled > [ 2.973374] 48066000.serial: ttyS4 at MMIO 0x48066000 (irq =3D 301, ba= se_baud =3D 3000000) is a 8250 > [ 2.986626] 48068000.serial: ttyS5 at MMIO 0x48068000 (irq =3D 302, ba= se_baud =3D 3000000) is a 8250 > [ 3.000384] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq =3D 303, ba= se_baud =3D 3000000) is a 8250 > [ 3.013605] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq =3D 304, ba= se_baud =3D 3000000) is a 8250 > [ 3.026632] [drm] Initialized drm 1.1.0 20060810 > [ 3.103462] brd: module loaded > [ 3.151021] loop: module loaded > [ 3.159525] mtdoops: mtd device (mtddev=3Dname/number) must be supplied > [ 3.172198] at25 spi1.0: 512 Byte at25 eeprom, pagesize 1 > [ 3.188330] tun: Universal TUN/TAP device driver, 1.6 > [ 3.193405] tun: (C) 1999-2004 Max Krasnyansky > [ 3.201240] CAN device driver interface > [ 3.210772] c_can_platform 4ae3c000.can: c_can_platform device registe= red (regs=3Dfce3c000, irq=3D341) > [ 3.225505] c_can_platform 48480000.can: c_can_platform device registe= red (regs=3Dfa480000, irq=3D342) > [ 3.238981] PPP generic driver version 2.4.2 > [ 3.244434] PPP BSD Compression module registered > [ 3.249187] PPP Deflate Compression module registered > [ 3.254695] PPP MPPE Compression module registered > [ 3.259547] NET: Registered protocol family 24 > [ 3.264690] usbcore: registered new interface driver smsc95xx > [ 3.270803] usbcore: registered new interface driver qmi_wwan > [ 3.277704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 3.284389] ehci-pci: EHCI PCI platform driver > [ 3.289200] ehci-omap: OMAP-EHCI Host Controller driver > [ 3.295529] usbcore: registered new interface driver cdc_wdm > [ 3.302065] usbcore: registered new interface driver usbserial > [ 3.308334] usbcore: registered new interface driver qcserial > [ 3.314618] usbserial: USB Serial support registered for Qualcomm USB = modem > [ 3.323973] mousedev: PS/2 mouse device common for all mice > [ 3.329788] -->tsc2013_init > [ 3.332590] tsc2013_init-->i2c_add_driver > [ 3.337138] i2c /dev entries driver > [ 3.352518] Bluetooth: HCI UART driver ver 2.3 > [ 3.357047] Bluetooth: HCI UART protocol H4 registered > [ 3.362208] Bluetooth: HCI UART protocol BCSP registered > [ 3.368215] Bluetooth: HCI UART protocol LL registered > [ 3.373374] Bluetooth: HCI UART protocol Three-wire (H5) registered > [ 3.382555] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 3.387973] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 3.394498] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 3.400879] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 3.407481] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 3.413863] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 3.420286] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 3.456350] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode > [ 3.462734] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode > [ 3.469165] omap_hsmmc 480b4000.mmc: no pinctrl state for ddr_1_8v mode > [ 3.475857] omap_hsmmc 480b4000.mmc: no pinctrl state for hs mode > [ 3.481977] omap_hsmmc 480b4000.mmc: no pinctrl state for hs200_1_8v m= ode > [ 3.489643] reg-fixed-voltage fixedregulator-vdd_3v3: Failed to resolv= e vin-supply for vdd_3v3 > [ 3.526145] omap_hsmmc 480d1000.mmc: no pinctrl state for sdr25 mode > [ 3.532526] omap_hsmmc 480d1000.mmc: no pinctrl state for sdr12 mode > [ 3.538958] omap_hsmmc 480d1000.mmc: no pinctrl state for hs mode > [ 3.575535] ledtrig-cpu: registered to indicate activity on CPUs > [ 3.582291] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 > [ 3.667156] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 > [ 3.674107] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 > [ 3.681648] alg: skcipher: setkey failed on test 5 for ecb-des-omap: f= lags=3D100 > [ 3.696058] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-om= ap: flags=3D100 > [ 3.704989] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-om= ap: flags=3D100 > [ 3.728606] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 > [ 3.793636] oprofile: using timer interrupt. > [ 3.799578] Initializing XFRM netlink socket > [ 3.803978] NET: Registered protocol family 17 > [ 3.808625] NET: Registered protocol family 15 > [ 3.813109] can: controller area network core (rev 20120528 abi 9) > [ 3.820289] NET: Registered protocol family 29 > [ 3.824861] can: raw protocol (rev 20120528) > [ 3.829208] can: broadcast manager protocol (rev 20120528 t) > [ 3.835006] can: netlink gateway (rev 20130117) max_hops=3D1 > [ 3.842195] Bluetooth: RFCOMM TTY layer initialized > [ 3.847368] Bluetooth: RFCOMM socket layer initialized > [ 3.852572] Bluetooth: RFCOMM ver 1.11 > [ 3.856447] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 3.861782] Bluetooth: BNEP filters: protocol multicast > [ 3.867254] Bluetooth: BNEP socket layer initialized > [ 3.872261] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > [ 3.878289] Bluetooth: HIDP socket layer initialized > [ 3.884126] Key type dns_resolver registered > [ 3.888790] omap_voltage_late_init: Voltage driver support not added > [ 3.896341] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm > [ 3.902651] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm > [ 3.909095] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-= 517 > [ 3.915996] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cp= u0 regulator/voltdm: -517 > [ 3.924942] cpu cpu0: cpu0 clock notifier not ready, retry > [ 3.931380] Power Management for TI OMAP4+ devices. > [ 3.936791] ThumbEE CPU extension supported. > [ 3.941133] Registering SWP/SWPB emulation handler > [ 3.949669] kmemleak: Kernel memory leak detector initialized > [ 3.949687] kmemleak: Automatic memory scanning thread started > [ 3.965040] dmm 4e000000.dmm: workaround for errata i878 in use > [ 3.973595] dmm 4e000000.dmm: initialized all PAT entries > [ 4.006585] bq32k 0-0068: rtc core: registered bq32k as rtc0 > [ 4.014138] palmas 0-0058: Irq flag is 0x00000007 > [ 4.026026] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 > [ 4.096789] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz > [ 4.107535] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz > [ 4.135922] tmp102 3-0048: initialized > [ 4.140842] -->tsc2013_probe > [ 4.143802] tsc2013 3-004b: GPIO not specified in DT (of_get_gpio retu= rned -2) > [ 4.151101] tsc2013_probe-->tsc2013_hw_init > [ 4.155314] -->tsc2013_hw_init > [ 4.158689] tsc2013_probe-->tsc2013_sw_init > [ 4.163051] tsc2013_i2c_write_register : CFG[62] =3D 0xa58c > [ 4.168648] tsc2013_i2c_write_register : CFG[6a] =3D 0x0 > [ 4.173966] tsc2013_i2c_write_register : CFG[72] =3D 0xb81c > [ 4.181082] input: tsc2013_ts as /devices/virtual/input/input0 > [ 4.187117] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz > [ 4.194521] OMAP DSS rev 6.1 > [ 4.197862] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_= component_ops) > [ 4.207370] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 4.212834] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 4.219364] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 4.225798] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 4.232180] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 4.238678] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 4.245075] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 4.252177] vdd_3v3: supplied by regen1 > [ 4.287832] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode > [ 4.294269] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode > [ 4.300651] omap_hsmmc 480b4000.mmc: no pinctrl state for ddr_1_8v mode > [ 4.307344] omap_hsmmc 480b4000.mmc: no pinctrl state for hs mode > [ 4.313463] omap_hsmmc 480b4000.mmc: no pinctrl state for hs200_1_8v m= ode > [ 4.356184] omap_hsmmc 480d1000.mmc: no pinctrl state for sdr25 mode > [ 4.362565] omap_hsmmc 480d1000.mmc: no pinctrl state for sdr12 mode > [ 4.368995] omap_hsmmc 480d1000.mmc: no pinctrl state for hs mode > [ 4.398393] mmc0: MAN_BKOPS_EN bit is not set > [ 4.403306] mmc0: new MMC card at address 0001 > [ 4.410365] mmcblk0: mmc0:0001 MMC04G 3.60 GiB=20 > [ 4.415599] mmcblk0boot0: mmc0:0001 MMC04G partition 1 16.0 MiB > [ 4.422204] mmcblk0boot1: mmc0:0001 MMC04G partition 2 16.0 MiB > [ 4.455001] mmcblk0: p1 p2 p3 > [ 4.494916] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm > [ 4.501224] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm > [ 4.512317] omap_hsmmc 480d1000.mmc: card claims to support voltages b= elow defined range > [ 4.522454] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm > [ 4.528832] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm > [ 4.548042] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) > [ 4.559911] mmc1: new SDIO card at address 0001 > [ 4.569429] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 4.576103] [drm] No driver support for vblank timestamp query. > [ 4.589105] [drm] Enabling DMM ywrap scrolling > [ 4.635666] Console: switching to colour frame buffer device 60x34 > [ 4.642779] omapdrm omapdrm.0: fb0: omapdrm frame buffer device > [ 4.648756] omapdrm omapdrm.0: registered panic notifier > [ 4.675019] omapwb-m2m: Device registered as video10 > [ 4.680010] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 > [ 4.686792] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 4.691996] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 4.698506] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 4.704999] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 4.711376] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 4.717780] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 4.724157] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 4.756516] bq32k 0-0068: setting system clock to 2015-12-14 15:01:35 = UTC (1450105295) > [ 4.816383] ldousb: disabling > [ 4.819662] wlan-en-regulator: disabling > [ 4.823602] pbias_mmc_omap5: disabling > [ 4.827733] ALSA device list: > [ 4.830708] No soundcards found. > [ 4.843116] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly f= ilesystem > [ 4.850694] EXT4-fs (mmcblk0p2): write access will be enabled during r= ecovery > [ 5.056067] EXT4-fs (mmcblk0p2): recovery complete > [ 5.066106] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data = mode. Opts: (null) > [ 5.074659] VFS: Mounted root (ext4 filesystem) readonly on device 179= :2. > [ 5.084335] devtmpfs: mounted > [ 5.088116] Freeing unused kernel memory: 1124K (c0ad3000 - c0bec000) > [ 96.882892] udevd[150]: starting version 182 > [ 97.710406] omap-rproc 58820000.ipu: device does not have specific CMA= pool > [ 97.757451] remoteproc0: releasing 58820000.ipu > [ 97.763149] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 97.769959] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 97.784648] omap-rproc 55020000.ipu: device does not have specific CMA= pool > [ 97.791649] remoteproc0: releasing 55020000.ipu > [ 97.814304] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 97.820696] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 97.903014] omap-rproc 40800000.dsp: device does not have specific CMA= pool > [ 97.914259] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 97.920648] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 97.962632] remoteproc0: releasing 40800000.dsp > [ 98.009400] omap-rproc 41000000.dsp: device does not have specific CMA= pool > [ 98.030444] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 98.061817] remoteproc0: releasing 41000000.dsp > [ 98.132692] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 98.141378] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 98.160694] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 98.171518] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 98.186897] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 98.193284] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 98.217447] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 98.372373] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 > [ 98.400753] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 98.409733] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 98.440704] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 98.453306] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 98.474793] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 98.545089] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 98.638128] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 98.643385] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin > [ 98.675264] vpe 489d0000.vpe: Device registered as /dev/video0 > [ 98.831576] wl1271_sdio: probe of mmc1:0001:2 failed with error -12 > [ 98.863080] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 98.925726] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60= sec > [ 98.959680] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 98.980071] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 99.063419] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 99.123476] (stk) :sysfs entries created > [ 99.158019] ahci 4a140000.sata: forcing PORTS_IMPL to 0x1 > [ 99.193198] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 99.234071] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps= 0x1 impl platform mode > [ 99.261873] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 99.271798] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 99.282445] ahci 4a140000.sata: flags: 64bit ncq sntf pm led clo only = pmp pio slum part ccc apst=20 > [ 99.343195] scsi host0: ahci > [ 99.350470] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 99.374102] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 99.382096] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 99.394807] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 99.399398] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] p= ort 0x100 irq 338 > [ 99.411119] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 99.420030] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 99.426463] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 99.489453] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 99.497511] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 99.510878] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 99.521889] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 99.531925] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 99.541803] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 99.552430] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 99.744246] ata1: SATA link down (SStatus 0 SControl 300) > [ 100.627365] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 100.632606] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 100.641115] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 100.648379] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 100.654838] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 100.661218] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 100.669209] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 100.768194] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller > [ 100.773909] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned= bus number 1 > [ 100.782810] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci versio= n 0x100 quirks 0x00210010 > [ 100.791786] xhci-hcd xhci-hcd.0.auto: irq 424, io mem 0x48890000 > [ 100.798762] usb usb1: New USB device found, idVendor=3D1d6b, idProduct= =3D0002 > [ 100.805592] usb usb1: New USB device strings: Mfr=3D3, Product=3D2, Se= rialNumber=3D1 > [ 100.812840] usb usb1: Product: xHCI Host Controller > [ 100.817874] usb usb1: Manufacturer: Linux 4.1.13-gf0f52afb60 xhci-hcd > [ 100.824347] usb usb1: SerialNumber: xhci-hcd.0.auto > [ 100.832347] hub 1-0:1.0: USB hub found > [ 100.836342] hub 1-0:1.0: 1 port detected > [ 100.842531] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 100.848231] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 100.854718] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 100.854841] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller > [ 100.854899] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned= bus number 2 > [ 100.855212] usb usb2: We don't know the algorithms for LPM for this ho= st, disabling LPM. > [ 100.855829] usb usb2: New USB device found, idVendor=3D1d6b, idProduct= =3D0003 > [ 100.855832] usb usb2: New USB device strings: Mfr=3D3, Product=3D2, Se= rialNumber=3D1 > [ 100.855836] usb usb2: Product: xHCI Host Controller > [ 100.855839] usb usb2: Manufacturer: Linux 4.1.13-gf0f52afb60 xhci-hcd > [ 100.855842] usb usb2: SerialNumber: xhci-hcd.0.auto > [ 100.866046] hub 2-0:1.0: USB hub found > [ 100.866159] hub 2-0:1.0: 1 port detected > [ 100.921271] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 100.928263] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 100.935207] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 100.943377] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 100.977379] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 100.982765] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 100.990218] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 100.998631] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 101.005101] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 101.011485] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 101.017925] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 101.046723] cryptodev: driver 1.6 loaded. > [ 101.093742] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=3Dordered > [ 101.154318] usb 1-1: new high-speed USB device number 2 using xhci-hcd > [ 101.184343] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd > [ 101.205476] usb 2-1: New USB device found, idVendor=3D0451, idProduct= =3D8140 > [ 101.212210] usb 2-1: New USB device strings: Mfr=3D0, Product=3D0, Ser= ialNumber=3D0 > [ 101.256299] hub 2-1:1.0: USB hub found > [ 101.271184] hub 2-1:1.0: 4 ports detected > [ 101.290355] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 101.295711] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 101.302182] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 101.309922] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 101.318162] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 101.321923] random: dd urandom read with 73 bits of entropy available > [ 101.331720] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 101.338829] usb 1-1: New USB device found, idVendor=3D0451, idProduct= =3D8142 > [ 101.345847] usb 1-1: New USB device strings: Mfr=3D0, Product=3D0, Ser= ialNumber=3D1 > [ 101.348282] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 101.359217] usb 1-1: SerialNumber: EE03006139CE > [ 101.400466] hub 1-1:1.0: USB hub found > [ 101.404631] hub 1-1:1.0: 4 ports detected > [ 101.438859] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 101.444127] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 101.459257] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 101.465698] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 101.472083] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 101.481299] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 101.488418] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 101.714281] usb 1-1.4: new high-speed USB device number 3 using xhci-h= cd > [ 101.837598] usb 1-1.4: config 1 has an invalid interface number: 8 but= max is 5 > [ 101.847760] usb 1-1.4: config 1 has an invalid interface number: 10 bu= t max is 5 > [ 101.855215] usb 1-1.4: config 1 has an invalid interface number: 11 bu= t max is 5 > [ 101.862642] usb 1-1.4: config 1 has no interface number 1 > [ 101.869021] usb 1-1.4: config 1 has no interface number 4 > [ 101.876706] usb 1-1.4: config 1 has no interface number 5 > [ 101.883857] usb 1-1.4: New USB device found, idVendor=3D1199, idProduc= t=3D68c0 > [ 101.890920] usb 1-1.4: New USB device strings: Mfr=3D1, Product=3D2, S= erialNumber=3D3 > [ 101.898268] usb 1-1.4: Product: MC7354 > [ 101.902030] usb 1-1.4: Manufacturer: Sierra Wireless, Incorporated > [ 101.979627] qmi_wwan 1-1.4:1.8: cdc-wdm0: USB WDM device > [ 101.993482] qmi_wwan 1-1.4:1.8 wwan0: register 'qmi_wwan' at usb-xhci-= hcd.0.auto-1.4, WWAN/QMI device, 22:dd:dc:e7:4e:5c > [ 102.010093] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 102.016811] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 102.023277] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 102.035938] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 102.042347] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 102.049196] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 102.051833] qmi_wwan 1-1.4:1.10: cdc-wdm1: USB WDM device > [ 102.055160] qmi_wwan 1-1.4:1.10 wwan1: register 'qmi_wwan' at usb-xhci= -hcd.0.auto-1.4, WWAN/QMI device, 22:dd:dc:e7:4e:5c > [ 102.073371] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > [ 102.106774] omap_hsmmc 4809c000.mmc: Got CD GPIO > [ 102.111875] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr104 mode > [ 102.118388] omap_hsmmc 4809c000.mmc: no pinctrl state for ddr50 mode > [ 102.125458] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr50 mode > [ 102.134688] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr25 mode > [ 102.143040] omap_hsmmc 4809c000.mmc: no pinctrl state for sdr12 mode > [ 102.149464] omap_hsmmc 4809c000.mmc: no pinctrl state for hs mode > --=20 > _______________________________________________ > meta-ti mailing list > meta-ti@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-ti