All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peng Fan <b51431@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/5] common: env_mmc: support loading env from different cards
Date: Wed, 16 Dec 2015 10:04:46 +0800	[thread overview]
Message-ID: <20151216020442.GA3708@shlinux2> (raw)
In-Reply-To: <56702AA7.3090906@denx.de>

Hi Stefano,

On Tue, Dec 15, 2015 at 03:58:47PM +0100, Stefano Babic wrote:
>Hi Peng,
>
>On 15/12/2015 09:26, Peng Fan wrote:
>> Some boards support booting from different SD card slots.
>> For example, mx6dpsabresd board supports booting from SD2,
>> SD3, EMMC4, using different boot switch. And the index
>> numbers are SD2(0), SD3(1), EMMC4(2).
>> But CONFIG_SYS_MMC_ENV_DEV is hardcoded to 1(for SD3), so when
>> booting from SD2(using 0), uboot complains "MMC: no card present",
>> since there is no card in SD3 slot.
>> 
>> This patch introduces a weak function which still returns
>> CONFIG_SYS_MMC_ENV_DEV to avoid break other boards. Then
>> different boards can implement mmc_get_env_devno to read
>> env from the correct sd/emmc.
>> 
>> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
>> Cc: Stefano Babic <sbabic@denx.de>
>> Cc: Simon Glass <sjg@chromium.org>
>> Cc: Tim Harvey <tharvey@gateworks.com>
>> Cc: Hans de Goede <hdegoede@redhat.com>
>> ---
>>  common/env_mmc.c | 22 ++++++++++++++--------
>>  1 file changed, 14 insertions(+), 8 deletions(-)
>> 
>> diff --git a/common/env_mmc.c b/common/env_mmc.c
>> index 9639822..d2e2a40 100644
>> --- a/common/env_mmc.c
>> +++ b/common/env_mmc.c
>> @@ -63,6 +63,11 @@ int env_init(void)
>>  	return 0;
>>  }
>>  
>> +__weak uint mmc_get_env_devno(void)
>> +{
>> +	return CONFIG_SYS_MMC_ENV_DEV;
>> +}
>> +
>>  #ifdef CONFIG_SYS_MMC_ENV_PART
>>  __weak uint mmc_get_env_part(struct mmc *mmc)
>>  {
>> @@ -72,7 +77,7 @@ __weak uint mmc_get_env_part(struct mmc *mmc)
>>  static int mmc_set_env_part(struct mmc *mmc)
>>  {
>>  	uint part = mmc_get_env_part(mmc);
>> -	int dev = CONFIG_SYS_MMC_ENV_DEV;
>> +	int dev = mmc_get_env_devno();
>>  	int ret = 0;
>
>mmc_get_env_devno() is moved inside the board file. Anyway, for i.MX6
>this means to check in the SRC register to get which is the boot device.
>Your board functions differ just for the number they return, depending
>how many controllers are initialized.
>
>The check routine can be factorized and moved to imx-common. The devnum
>could then be extracted from a table (maybe usdhc_cfg present in all
>boards).

Thanks for comments. How about the following way:

Add the weak function in imx-common/cpu.c:
__weak int board_mmc_get_env_devno(int devno)
{
	return CONFIG_SYS_MMC_ENV_DEV;
}

Add add in arch/arm/cpu/armv7/mx6/soc.c
int mmc_get_env_devno(void)
{
	devno = [ check src smbr1 ]

	return board_mmc_get_env_devno(devno)
}
For i.MX7, it's different, and need to fix it in arch/arm/cpu/armv7/mx7/soc.c

And final in board file,implement
int board_mmc_get_env_devno(int devno)
{	
   following is example for different boot slot used by different boards:
	sd1/sd2/sd3, return devno;
	sd2/sd3, return devno - 1;
	sd3/sd4, return devno - 2;
	sd1/sd4, if (devno == 3) return devno - 2; return devno
}

Thanks,
Peng.
>
>>  
>>  #ifdef CONFIG_SPL_BUILD
>> @@ -108,7 +113,7 @@ static const char *init_mmc_for_env(struct mmc *mmc)
>>  static void fini_mmc_for_env(struct mmc *mmc)
>>  {
>>  #ifdef CONFIG_SYS_MMC_ENV_PART
>> -	int dev = CONFIG_SYS_MMC_ENV_DEV;
>> +	int dev = mmc_get_env_devno();
>>  
>>  #ifdef CONFIG_SPL_BUILD
>>  	dev = 0;
>> @@ -127,7 +132,7 @@ static inline int write_env(struct mmc *mmc, unsigned long size,
>>  	blk_start	= ALIGN(offset, mmc->write_bl_len) / mmc->write_bl_len;
>>  	blk_cnt		= ALIGN(size, mmc->write_bl_len) / mmc->write_bl_len;
>>  
>> -	n = mmc->block_dev.block_write(CONFIG_SYS_MMC_ENV_DEV, blk_start,
>> +	n = mmc->block_dev.block_write(mmc_get_env_devno(), blk_start,
>>  					blk_cnt, (u_char *)buffer);
>>  
>>  	return (n == blk_cnt) ? 0 : -1;
>> @@ -140,7 +145,8 @@ static unsigned char env_flags;
>>  int saveenv(void)
>>  {
>>  	ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1);
>> -	struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
>> +	int mmc_env_devno = mmc_get_env_devno();
>> +	struct mmc *mmc = find_mmc_device(mmc_env_devno);
>>  	u32	offset;
>>  	int	ret, copy = 0;
>>  	const char *errmsg;
>> @@ -168,7 +174,7 @@ int saveenv(void)
>>  	}
>>  
>>  	printf("Writing to %sMMC(%d)... ", copy ? "redundant " : "",
>> -	       CONFIG_SYS_MMC_ENV_DEV);
>> +	       mmc_env_devno);
>>  	if (write_env(mmc, CONFIG_ENV_SIZE, offset, (u_char *)env_new)) {
>>  		puts("failed\n");
>>  		ret = 1;
>> @@ -192,7 +198,7 @@ static inline int read_env(struct mmc *mmc, unsigned long size,
>>  			   unsigned long offset, const void *buffer)
>>  {
>>  	uint blk_start, blk_cnt, n;
>> -	int dev = CONFIG_SYS_MMC_ENV_DEV;
>> +	int dev = mmc_get_env_devno();
>>  
>>  #ifdef CONFIG_SPL_BUILD
>>  	dev = 0;
>> @@ -216,7 +222,7 @@ void env_relocate_spec(void)
>>  	int crc1_ok = 0, crc2_ok = 0;
>>  	env_t *ep;
>>  	int ret;
>> -	int dev = CONFIG_SYS_MMC_ENV_DEV;
>> +	int dev = mmc_get_env_devno();
>>  	const char *errmsg = NULL;
>>  
>>  	ALLOC_CACHE_ALIGN_BUFFER(env_t, tmp_env1, 1);
>> @@ -302,7 +308,7 @@ void env_relocate_spec(void)
>>  	struct mmc *mmc;
>>  	u32 offset;
>>  	int ret;
>> -	int dev = CONFIG_SYS_MMC_ENV_DEV;
>> +	int dev = mmc_get_env_devno();
>>  	const char *errmsg;
>>  
>>  #ifdef CONFIG_SPL_BUILD
>> 
>
>Best regards,
>Stefano Babic
>
>-- 
>=====================================================================
>DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>=====================================================================

-- 

      reply	other threads:[~2015-12-16  2:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-15  8:26 [U-Boot] [PATCH 1/5] common: env_mmc: support loading env from different cards Peng Fan
2015-12-15  8:26 ` [U-Boot] [PATCH 2/5] imx: mx6sabresd: implement mmc_get_env_devno Peng Fan
2015-12-15  8:26 ` [U-Boot] [PATCH 3/5] imx: mx6qarm2: " Peng Fan
2015-12-15  8:26 ` [U-Boot] [PATCH 4/5] imx: mx6slevk: " Peng Fan
2015-12-15  8:26 ` [U-Boot] [PATCH 5/5] imx: mx6sxsabresd: " Peng Fan
2015-12-15 14:58 ` [U-Boot] [PATCH 1/5] common: env_mmc: support loading env from different cards Stefano Babic
2015-12-16  2:04   ` Peng Fan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151216020442.GA3708@shlinux2 \
    --to=b51431@freescale.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.