From: Denys Dmytriyenko <denys@ti.com>
To: Joshua Vanderpool <jdvdt2@gmail.com>
Cc: meta-ti mailing list <meta-ti@yoctoproject.org>
Subject: Re: Cannot compile omapdrm-pvr for A15
Date: Wed, 16 Dec 2015 15:21:56 -0500 [thread overview]
Message-ID: <20151216202156.GI27464@edge> (raw)
In-Reply-To: <CAAjA2M+ukzZuS=q6+Vhwrba9Axc7NXXChn4F42KzakR8RDXREw@mail.gmail.com>
On Wed, Dec 16, 2015 at 03:10:05PM -0500, Joshua Vanderpool wrote:
> Aymeric,
>
> They have switched to the 2015 linaro toolchain.
>
> $ wget
> http://releases.linaro.org/15.05/components/toolchain/binaries/arm-linux-gnueabihf/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf.tar.xz
>
> $ tar xf gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf.tar.xz
>
> $ export
> PATH=$HOME/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin:$PATH
>
> Also make sure to have dos2unix installed or the build of the omapdrm will
> fail as well.
>
> I am sure the wiki will be updated soon.
Yes, the Wiki has been updated to reflect Fido and Linaro 2015.05 toolchain.
--
Denys
> On Wed, Dec 16, 2015 at 2:40 PM, Aymeric Dumaz <aymeric.dumaz@gmail.com>
> wrote:
>
> > 2015-12-16 9:44 GMT-08:00 Denys Dmytriyenko <denys@ti.com>:
> > > On Tue, Dec 15, 2015 at 12:40:30PM -0800, Aymeric Dumaz wrote:
> > >> 2015-12-15 11:49 GMT-08:00 Denys Dmytriyenko <denys@ti.com>:
> > >> > On Tue, Dec 15, 2015 at 11:41:10AM -0800, Aymeric Dumaz wrote:
> > >> >> Hello,
> > >> >>
> > >> >> I am trying to create an image with Qt5 for my BeagleBoard X15. I set
> > >> >> up the build environment as explained in the Arago wiki, and add that
> > >> >> my local.conf:
> > >> >>
> > >> >> IMAGE_INSTALL_append = " kernel-modules omap5-sgx-ddk-um-linux
> > >> >> omapdrm-pvr libgbm libdrm libdrm-omap qtbase qtbase-plugins
> > >> >> qtbase-fonts qtquick1 qtquick1-qmlplugins kmscube"
> > >> >>
> > >> >> But when it tries to compile omapdrm-pvr, it prints the following
> > >> >> errors (same if I try with the OMAP5432 uEVM).
> > >> >>
> > >> >> I am missing something?
> > >> >> Regards
> > >> >
> > >> > I see that you are using Daisy branch and 3.14 kernel. Make sure you
> > build
> > >> > against linux-ti-staging_3.14 kernel, as it is specifically patches
> > with
> > >> > necessary SGX API (like omap_gem_* symbols below).
> > >>
> > >> Thank you for your answer.
> > >> I did a "cleansstate virtual/kernel" and rebuild omapdrm-pvr, which
> > >> triggered the kernel to be rebuilt too.
> > >> It is the correct version
> > >> (linux-ti-staging-3.14.49+gitAUTOINC+e9cd4cc819-r7a-arago2), but
> > >> omapdrm-pvr fails with the same errors.
> > >
> > > Aymeric,
> > >
> > > We've moved on to Fido setup with 4.1 kernel some time back and I
> > personally
> > > haven't tried Daisy/3.14 recently. Can you try Fido/4.1 as well?
> >
> > My bad, I followed the "Setting Up Build Environment" wiki page.
> > I tried with Fido (configs/arago-fido-config.txt), but I have some
> > issues with the toolchain now; I tried the 2013.10 version but it has
> > the same problems.
> > Should I use another toolchain?
> >
> > |
> > /linaro_toolchain/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.7.3/../../../../arm-linux-gnueabihf/bin/ld:
> > cannot find ../../lib/libc.so.6
> > | collect2: error: ld returned 1 exit status
> > | make: *** [example] Error 1
> > | make: *** Waiting for unfinished jobs....
> > |
> > /linaro_toolchain/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.7.3/../../../../arm-linux-gnueabihf/bin/ld:
> > cannot find ../../lib/libc.so.6
> > | collect2: error: ld returned 1 exit status
> > | make: *** [minigzip] Error 1
> > |
> > /linaro_toolchain/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.7.3/../../../../arm-linux-gnueabihf/bin/ld:
> > cannot find ../../lib/libc.so.6
> > | collect2: error: ld returned 1 exit status
> > | make: *** [example64] Error 1
> > |
> > /linaro_toolchain/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.7.3/../../../../arm-linux-gnueabihf/bin/ld:
> > cannot find ../../lib/libc.so.6
> > | collect2: error: ld returned 1 exit status
> > | make: *** [minigzip64] Error 1
> > | ERROR: oe_runmake failed
> > | WARNING: exit code 1 from a shell command.
> > | ERROR: Function failed: do_compile (log file is located at
> >
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/zlib/1.2.8-r0/temp/log.do_compile.22964)
> > ERROR: Task 894
> > (/tisdk/sources/oe-core/meta/recipes-core/zlib/zlib_1.2.8.bb,
> > do_compile) failed with exit code '1'
> > ERROR: Function failed: do_configure (log file is located at
> >
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.18450)
> > ERROR: Logfile of failure stored in:
> >
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.18450
> >
> > [...]
> >
> > | ## ------------------------- ##
> > | ## Configuring libtool 2.4.6 ##
> > | ## ------------------------- ##
> > |
> > | checking for GNU M4 that supports accurate traces...
> >
> > /tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> > | checking whether
> >
> > /tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/bin/m4
> > accepts --gnu... yes
> > | checking how m4 supports trace files... --debugfile
> > | checking for a BSD-compatible install... /usr/bin/install -c
> > | checking whether build environment is sane... yes
> > | checking for arm-linux-gnueabi-strip... arm-linux-gnueabihf-strip
> > | checking for a thread-safe mkdir -p... /bin/mkdir -p
> > | checking for gawk... gawk
> > | checking whether make sets $(MAKE)... yes
> > | checking whether make supports nested variables... yes
> > | checking whether make supports nested variables... (cached) yes
> > | checking build system type... x86_64-pc-linux-gnu
> > | checking host system type... arm-unknown-linux-gnueabi
> > | configure: autobuild project... GNU Libtool
> > | configure: autobuild revision... 2.4.6
> > | configure: autobuild hostname... ubuntu_precise
> > | configure: autobuild mode... default
> > | configure: autobuild timestamp... 20151216T191217Z
> > | checking for arm-linux-gnueabi-gcc... arm-linux-gnueabihf-gcc
> > -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon
> > -mtune=cortex-a15
> >
> > --sysroot=/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm
> > | checking whether the C compiler works... no
> > | configure: error: in
> >
> > `/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/build':
> > | configure: error: C compiler cannot create executables
> > | See `config.log' for more details
> > | Configure failed. The contents of all config.log files follows to
> > aid debugging
> > | ERROR: oe_runconf failed
> > | WARNING: exit code 1 from a shell command.
> > | ERROR: Function failed: do_configure (log file is located at
> >
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-linux-gnueabi/libtool-cross/2.4.6-r0/temp/log.do_configure.18450)
> > ERROR: Task 530
> > (/tisdk/sources/oe-core/meta/recipes-devtools/libtool/
> > libtool-cross_2.4.6.bb,
> > do_configure) failed with exit code '1'
> >
> >
> > >
> > > Karthik,
> > >
> > > Were you still using Daisy with 3.14 kernel? Have you had any issues with
> > > omapdrm-pvr?
> > >
> > > --
> > > Denys
> > >
> > >
> > >> >> $ MACHINE=am57xx-evm bitbake omapdrm-pvr
> > >> >> NOTE: Started PRServer with DBfile:
> > /tisdk/build/cache/prserv.sqlite3,
> > >> >> IP: 127.0.0.1, PORT: 40922, PID: 19820
> > >> >> Loading cache: 100%
> > >> >> |########################################################| ETA:
> > >> >> 00:00:00
> > >> >> Loaded 2270 entries from dependency cache.
> > >> >> Parsing recipes: 100%
> > >> >> |######################################################| Time:
> > >> >> 00:00:00
> > >> >> Parsing of 1827 .bb files complete (1826 cached, 1 parsed). 2270
> > >> >> targets, 212 skipped, 0 masked, 0 errors.
> > >> >> WARNING: No recipes available for:
> > >> >>
> > /tisdk/sources/meta-arago/meta-arago-distro/recipes-connectivity/openssl/openssl_1.0.1m.bbappend
> > >> >> NOTE: Resolving any missing task queue dependencies
> > >> >>
> > >> >> Build Configuration:
> > >> >> BB_VERSION = "1.26.0"
> > >> >> BUILD_SYS = "x86_64-linux"
> > >> >> NATIVELSBSTRING = "Ubuntu-12.04"
> > >> >> TARGET_SYS = "arm-linux-gnueabi"
> > >> >> MACHINE = "am57xx-evm"
> > >> >> DISTRO = "arago"
> > >> >> DISTRO_VERSION = "2015.05"
> > >> >> TUNE_FEATURES = "armv7a vfp thumb neon callconvention-hard
> > cortexa15"
> > >> >> TARGET_FPU = "vfp-neon"
> > >> >> meta-arago-distro
> > >> >> meta-arago-extras = "daisy:dc89e06d2a64f33d9e9662e6f7fe1f8466ff167c"
> > >> >> meta-qt5 =
> > "(nobranch):17eb158c6d2cd290b054b5bd54311aa44a02d04d"
> > >> >> toolchain-layer
> > >> >> meta-networking
> > >> >> meta-ruby
> > >> >> meta-oe = "daisy:d3d14d3fcca7fcde362cf0b31411dc4eea6d20aa"
> > >> >> meta-ti = "daisy:090b02a104924886afd0fa79be7b5d08eebf071f"
> > >> >> meta-linaro-toolchain =
> > "daisy:06008235ca752fea678953e85adaa29a491d246b"
> > >> >> meta = "daisy:e1a2540227250d854d5bba278634bcc9e7572cda"
> > >> >>
> > >> >> NOTE: Preparing RunQueue
> > >> >> NOTE: Executing SetScene Tasks
> > >> >> NOTE: Executing RunQueue Tasks
> > >> >> ERROR: Function failed: do_compile (log file is located at
> > >> >>
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/temp/log.do_compile.19911)
> > >> >> ERROR: Logfile of failure stored in:
> > >> >>
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/temp/log.do_compile.19911
> > >> >> Log data follows:
> > >> >> | DEBUG: Executing shell function do_compile
> > >> >> | NOTE: make -j 8 -e MAKEFLAGS=
> > >> >>
> > KERNELDIR=/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/src/kernel
> > >> >>
> > KERNEL_PATH=/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/src/kernel
> > >> >>
> > KERNEL_SRC=/tisdk/build/arago-tmp-external-linaro-toolchain/sysroots/am57xx-evm/usr/src/kernel
> > >> >> KERNEL_VERSION=3.14.49-ge9cd4cc CC=arm-linux-gnueabihf-gcc
> > >> >> -mno-thumb-interwork -marm LD=arm-linux-gnueabihf-ld.bfd
> > >> >> AR=arm-linux-gnueabihf-ar
> > >> >> | ../config/core.mk:419: $(KERNELDIR)/vmlinux does not exist.
> > Kbuild may fail.
> > >> >> | CC [M]
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.o
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:
> > >> >> In function 'create_gem_wrapper':
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:480:2:
> > >> >> error: implicit declaration of function 'omap_gem_new_ext'
> > >> >> [-Werror=implicit-function-declaration]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:480:2:
> > >> >> error: return makes pointer from integer without a cast [-Werror]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:
> > >> >> In function 'MMapVOpenExt':
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1370:2:
> > >> >> error: implicit declaration of function 'omap_gem_priv'
> > >> >> [-Werror=implicit-function-declaration]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1370:15:
> > >> >> error: initialization makes pointer from integer without a cast
> > >> >> [-Werror]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:
> > >> >> In function 'MMapVCloseExt':
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1384:15:
> > >> >> error: initialization makes pointer from integer without a cast
> > >> >> [-Werror]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:
> > >> >> In function 'PVRMMapExt':
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1442:2:
> > >> >> error: implicit declaration of function 'omap_gem_set_priv'
> > >> >> [-Werror=implicit-function-declaration]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:
> > >> >> At top level:
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1473:15:
> > >> >> error: variable 'gem_ops' has initializer but incomplete type
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1474:3:
> > >> >> error: unknown field 'open' specified in initializer
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1474:3:
> > >> >> error: excess elements in struct initializer [-Werror]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1474:3:
> > >> >> error: (near initialization for 'gem_ops') [-Werror]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1475:3:
> > >> >> error: unknown field 'close' specified in initializer
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1475:3:
> > >> >> error: excess elements in struct initializer [-Werror]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1475:3:
> > >> >> error: (near initialization for 'gem_ops') [-Werror]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1476:3:
> > >> >> error: unknown field 'mmap' specified in initializer
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1476:3:
> > >> >> error: excess elements in struct initializer [-Werror]
> > >> >> |
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.c:1476:3:
> > >> >> error: (near initialization for 'gem_ops') [-Werror]
> > >> >> | cc1: all warnings being treated as errors
> > >> >> | make[3]: ***
> > [/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild/services4/srvkm/env/linux/mmap.o]
> > >> >> Error 1
> > >> >> | make[2]: ***
> > [_module_/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/git/eurasia_km/eurasiacon/binary2_omap5430_linux_release/target/kbuild]
> > >> >> Error 2
> > >> >> | make[1]: *** [kbuild] Error 2
> > >> >> | make: *** [build] Error 2
> > >> >> | ERROR: oe_runmake failed
> > >> >> | WARNING: exit code 1 from a shell command.
> > >> >> | ERROR: Function failed: do_compile (log file is located at
> > >> >>
> > /tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/omapdrm-pvr/1.9.2253347-r7k/temp/log.do_compile.19911)
> > >> >> ERROR: Task 8 (/tisdk/sources/meta-ti/recipes-bsp/powervr-drivers/
> > omapdrm-pvr_1.9.2253347.bb,
> > >> >> do_compile) failed with exit code '1'
> > >> >> NOTE: Tasks Summary: Attempted 406 tasks of which 403 didn't need to
> > >> >> be rerun and 1 failed.
> > >> >> NOTE: Writing buildhistory
> > >> >> Waiting for 0 running tasks to finish:
> > >> >>
> > >> >> Summary: 1 task failed:
> > >> >> /tisdk/sources/meta-ti/recipes-bsp/powervr-drivers/
> > omapdrm-pvr_1.9.2253347.bb,
> > >> >> do_compile
> > >> >> Summary: There was 1 WARNING message shown.
> > >> >> Summary: There was 1 ERROR message shown, returning a non-zero exit
> > code.
> > >> >> --
> > >> >> _______________________________________________
> > >> >> meta-ti mailing list
> > >> >> meta-ti@yoctoproject.org
> > >> >> https://lists.yoctoproject.org/listinfo/meta-ti
> > >>
> > >>
> > >>
> > >> --
> > >> Aymeric Dumaz
> > >> Epita 2014
> > --
> > _______________________________________________
> > meta-ti mailing list
> > meta-ti@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-ti
> >
next prev parent reply other threads:[~2015-12-16 20:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 19:41 Cannot compile omapdrm-pvr for A15 Aymeric Dumaz
2015-12-15 19:49 ` Denys Dmytriyenko
2015-12-15 21:27 ` Aymeric Dumaz
[not found] ` <CAESSzZzUhzzCxMWQP_OUOG1BMpBFc+BRzB3y1d97F-VL9sqnUg@mail.gmail.com>
2015-12-16 17:44 ` Denys Dmytriyenko
2015-12-16 19:40 ` Aymeric Dumaz
2015-12-16 20:10 ` Joshua Vanderpool
2015-12-16 20:21 ` Denys Dmytriyenko [this message]
2015-12-17 23:36 ` Aymeric Dumaz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151216202156.GI27464@edge \
--to=denys@ti.com \
--cc=jdvdt2@gmail.com \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.