[U-Boot] [PATCH] socfpga: Modify qts-filter args to allow input for bsp generated files and quartus project directories

[Marek Vasut <marex@denx.de>]

On Monday, January 11, 2016 at 11:28:37 PM, Dalon Westergreen wrote:

Please add a commit message explaining why this change is needed. I have no
comments about the patch, so just add my

Acked-by: Marek Vasut <marex@denx.de>

when you repost. I will pick it for the next release.

Also, it's a good idea to CC Dinh and Chin.

> Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
> ---
>  arch/arm/mach-socfpga/qts-filter.sh | 69
> ++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 31
> deletions(-)
> 
> diff --git a/arch/arm/mach-socfpga/qts-filter.sh
> b/arch/arm/mach-socfpga/qts-filter.sh index c1640bc..835ca2c 100755
> --- a/arch/arm/mach-socfpga/qts-filter.sh
> +++ b/arch/arm/mach-socfpga/qts-filter.sh
> @@ -3,13 +3,15 @@
>  #
>  # Process iocsr_config_*.[ch]
>  # $1:	SoC type
> -# $2:	Input directory
> -# $3:	Output directory
> +# $2:	Input handoff directory
> +# $3:	Input BSP Generated directory
> +# $4:	Output directory
>  #
>  process_iocsr_config() {
>  	soc="$1"
> -	in_dir="$2"
> -	out_dir="$3"
> +	in_qts_dir="$2"
> +	in_bsp_dir="$3"
> +	out_dir="$4"
> 
>  	(
>  	cat << EOF
> @@ -26,13 +28,13 @@ EOF
> 
>  	# Retrieve the scan chain lengths
>  	grep 'CONFIG_HPS_IOCSR_SCANCHAIN[0-9]\+_LENGTH'			\
> -		${in_dir}/generated/iocsr_config_${soc}.h | tr -d "()"
> +		${in_bsp_dir}/generated/iocsr_config_${soc}.h | tr -d "()"
> 
>  	echo ""
> 
>  	# Retrieve the scan chain config and zap the ad-hoc length encoding
>  	sed -n '/^const/ !b; :next {/^const/ s/(.*)//;p;n;b next}'	\
> -		${in_dir}/generated/iocsr_config_${soc}.c
> +		${in_bsp_dir}/generated/iocsr_config_${soc}.c
> 
>  	cat << EOF
> 
> @@ -49,8 +51,9 @@ EOF
>  #
>  process_pinmux_config() {
>  	soc="$1"
> -	in_dir="$2"
> -	out_dir="$3"
> +	in_qts_dir="$2"
> +	in_bsp_dir="$3"
> +	out_dir="$4"
> 
>  	(
>  	cat << EOF
> @@ -67,7 +70,7 @@ EOF
> 
>  	# Retrieve the pinmux config and zap the ad-hoc length encoding
>  	sed -n '/^unsigned/ !b; :next {/^unsigned/ {s/\[.*\]/[]/;s/unsigned
> long/const u8/};p;n;b next}' \
> -		${in_dir}/generated/pinmux_config_${soc}.c
> +		${in_bsp_dir}/generated/pinmux_config_${soc}.c
> 
>  	cat << EOF
> 
> @@ -84,8 +87,9 @@ EOF
>  #
>  process_pll_config() {
>  	soc="$1"
> -	in_dir="$2"
> -	out_dir="$3"
> +	in_qts_dir="$2"
> +	in_bsp_dir="$3"
> +	out_dir="$4"
> 
>  	(
>  	cat << EOF
> @@ -102,7 +106,7 @@ EOF
> 
>  	# Retrieve the pll config and zap parenthesis
>  	sed -n '/CONFIG_HPS/ !b; :next {/CONFIG_HPS/ s/[()]//g;/endif/ b;p;n;b
> next}' \ -		${in_dir}/generated/pll_config.h
> +		${in_bsp_dir}/generated/pll_config.h
> 
>  	cat << EOF
> 
> @@ -126,8 +130,9 @@ grep_sdram_config() {
>  #
>  process_sdram_config() {
>  	soc="$1"
> -	in_dir="$2"
> -	out_dir="$3"
> +	in_qts_dir="$2"
> +	in_bsp_dir="$3"
> +	out_dir="$4"
> 
>  	(
>  	cat << EOF
> @@ -144,29 +149,29 @@ EOF
> 
>  	echo "/* SDRAM configuration */"
>  	# Retrieve the sdram config, zap broken lines and zap parenthesis
> -	sed -n "/\\\\$/ {N;s/ \\\\\n/\t/};p"
> ${in_dir}/generated/sdram/sdram_config.h | +	sed -n "/\\\\$/ {N;s/
> \\\\\n/\t/};p" ${in_bsp_dir}/generated/sdram/sdram_config.h | sed -n
> '/CONFIG_HPS/ !b; :next {/CONFIG_HPS/ s/[()]//g;/endif/ b;p;n;b next}' |
> sort -u | grep_sdram_config
> 
>  	echo ""
>  	echo "/* Sequencer auto configuration */"
>  	sed -n "/__RW_MGR/ {s/__//;s/ \+\([^ ]\+\)$/\t\1/p}"		\
> -		${in_dir}/hps_isw_handoff/*/sequencer_auto.h | sort -u |
> grep_sdram_config +		${in_qts_dir}/hps_isw_handoff/*/sequencer_auto.h 
|
> sort -u | grep_sdram_config
> 
>  	echo ""
>  	echo "/* Sequencer defines configuration */"
>  	sed -n "/^#define [^_]/ {s/__//;s/ \+\([^ ]\+\)$/\t\1/p}"	\
> -		${in_dir}/hps_isw_handoff/*/sequencer_defines.h | sort -u |
> grep_sdram_config +		
${in_qts_dir}/hps_isw_handoff/*/sequencer_defines.h |
> sort -u | grep_sdram_config
> 
>  	echo ""
>  	echo "/* Sequencer ac_rom_init configuration */"
>  	sed -n '/^const.*\[/ !b; :next {/^const.*\[/
> {N;s/\n//;s/alt_u32/u32/;s/\[.*\]/[]/};/endif/ b;p;n;b next}'\
> -		${in_dir}/hps_isw_handoff/*/sequencer_auto_ac_init.c
> +		${in_qts_dir}/hps_isw_handoff/*/sequencer_auto_ac_init.c
> 
>  	echo ""
>  	echo "/* Sequencer inst_rom_init configuration */"
>  	sed -n '/^const.*\[/ !b; :next {/^const.*\[/
> {N;s/\n//;s/alt_u32/u32/;s/\[.*\]/[]/};/endif/ b;p;n;b next}'\
> -		${in_dir}/hps_isw_handoff/*/sequencer_auto_inst_init.c
> +		${in_qts_dir}/hps_isw_handoff/*/sequencer_auto_inst_init.c
> 
>  	cat << EOF
> 
> @@ -176,30 +181,32 @@ EOF
>  }
> 
>  usage() {
> -	echo "$0 [soc_type] [input_dir] [output_dir]"
> +	echo "$0 [soc_type] [input_qts_dir] [input_bsp_dir] [output_dir]"
>  	echo "Process QTS-generated headers into U-Boot compatible ones."
>  	echo ""
> -	echo "  soc_type\t\tType of SoC, either 'cyclone5' or 'arria5',"
> -	echo "  input_dir\t\tDirectory with the QTS project."
> -	echo "  output_dir\t\tDirectory to store the U-Boot compatible headers."
> +	echo "  soc_type - Type of SoC, either 'cyclone5' or 'arria5',"
> +	echo "  input_hps_qts_dir - Directory with the compiled Quartus 
project."
> +	echo "  input_bsp_dir - Directory with the generated output of the
> bsp-editor." +	echo "  output_dir - Directory to store the U-Boot
> compatible headers." echo ""
>  }
> 
>  soc="$1"
> -in_dir="$2"
> -out_dir="$3"
> +in_qts_dir="$2"
> +in_bsp_dir="$3"
> +out_dir="$4"
> 
> -if [ "$#" -ne 3 ] ; then
> +if [ "$#" -ne 4 ] ; then
>  	usage
>  	exit 1
>  fi
> 
> -if [ ! -d "${in_dir}" -o ! -d "${out_dir}" -o -z "${soc}" ] ; then
> +if [ ! -d "${in_qts_dir}" -o ! -d "${in_bsp_dir}" -o ! -d "${out_dir}" -o
> -z "${soc}" ] ; then usage
>  	exit 3
>  fi
> 
> -process_iocsr_config  "${soc}" "${in_dir}" "${out_dir}"
> -process_pinmux_config "${soc}" "${in_dir}" "${out_dir}"
> -process_pll_config    "${soc}" "${in_dir}" "${out_dir}"
> -process_sdram_config  "${soc}" "${in_dir}" "${out_dir}"
> +process_iocsr_config  "${soc}" "${in_qts_dir}" "${in_bsp_dir}"
> "${out_dir}" +process_pinmux_config "${soc}" "${in_qts_dir}"
> "${in_bsp_dir}" "${out_dir}" +process_pll_config    "${soc}"
> "${in_qts_dir}" "${in_bsp_dir}" "${out_dir}" +process_sdram_config 
> "${soc}" "${in_qts_dir}" "${in_bsp_dir}" "${out_dir}"