Re: example GATT code to talk with a sensortag

[Don Zickus <dzickus@redhat.com>]

On Wed, Jan 13, 2016 at 10:44:02PM +0100, Łukasz Rymanowski wrote:
> > Thank you!
> >
> >
> > I did _not_ see GattCharacteristic1 in the output, nor do I see either
> > GattService or GattCharacteristic1 show up as an interface in either
> > /org/bluez/hci0/dev_XXXXX or /org/bluez/hci0.
> >
> >
> > Did I miss a step or misunderstand your suggestion?
> 
> You got it well.
> To be more clear.
> If your bluetoothd runs with -E option and you connect to BLE device
> which expose any GATT services, after connect you should see new
> objects paths. Smth like this:
> 
> a) /org/bluez/hci0/dev_XXXXX/servicexxxx
> b) /org/bluez/hci0/dev_XXXXX/servicexxxx/charyyyy
> c) /org/bluez/hci0/dev_XXXXX/servicexxxx/charzzzz
> 
> etc.
> 
> Inside a) you should see GattService1 and inside b) and c) GattCharacteristic1
> 
> Just make sure -E is there and if still not work, provide btmon.log

Some days are better than others.  After rebooting yesterday, my bluetooth
device stopped working... so while I am excited to test your suggestion, I
am stuck trying to make it work again.  So I apologize if my response comes
later.  I do appreciate the tips and patience!

Hopefully tomorrow things will work again.. :-/

Cheers,
Don