All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ladislav Michl <ladis@linux-mips.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv7 6/7] igep00x0: UBIize
Date: Sun, 17 Jan 2016 04:16:03 +0100	[thread overview]
Message-ID: <20160117031603.GG28493@localhost.localdomain> (raw)
In-Reply-To: <20160117030929.GA28493@localhost.localdomain>

Convert IGEP board to use UBI volumes for U-Boot, its environment and
kernel. With exception of first four sectors read by SoC boot
ROM whole NAND is UBI managed. As code is too big now, drop
CONFIG_SPL_EXT_SUPPORT to make it fit.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
 include/configs/omap3_igep00x0.h | 80 ++++++++++++++++++++++------------------
 1 file changed, 45 insertions(+), 35 deletions(-)

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 5da6cfd..9afbcbe 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -74,6 +74,8 @@
 #define CONFIG_CMD_CACHE
 #ifdef CONFIG_BOOT_ONENAND
 #define CONFIG_CMD_ONENAND	/* ONENAND support		*/
+#else
+#define CONFIG_CMD_UBI
 #endif
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
@@ -86,6 +88,10 @@
 	"stdout=serial\0" \
 	"stderr=serial\0"
 
+#define ENV_MTD_SETTINGS \
+	"mtdids=nand0=gpmc-nand.0\0" \
+	"mtdparts=mtdparts=gpmc-nand.0:512k(SPL),-(UBI)\0"
+
 #define MEM_LAYOUT_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
 	"scriptaddr=0x87E00000\0" \
@@ -96,36 +102,15 @@
 
 #include <config_distro_bootcmd.h>
 
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	ENV_DEVICE_SETTINGS \
+	ENV_MTD_SETTINGS \
 	MEM_LAYOUT_SETTINGS \
 	BOOTENV
 
 #endif
 
 /*
- * FLASH and environment organization
- */
-
-#ifdef CONFIG_BOOT_ONENAND
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
-
-#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
-
-#define CONFIG_ENV_IS_IN_ONENAND	1
-#define CONFIG_ENV_SIZE			(512 << 10) /* Total Size Environment */
-#define CONFIG_ENV_ADDR			ONENAND_ENV_OFFSET
-#endif
-
-#ifdef CONFIG_NAND
-#define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
-#define CONFIG_ENV_IS_IN_NAND	        1
-#define CONFIG_ENV_SIZE			(512 << 10) /* Total Size Environment */
-#define CONFIG_ENV_ADDR			NAND_ENV_OFFSET
-#endif
-
-/*
  * SMSC911x Ethernet
  */
 #if defined(CONFIG_CMD_NET)
@@ -134,19 +119,50 @@
 #define CONFIG_SMC911X_BASE		0x2C000000
 #endif /* (CONFIG_CMD_NET) */
 
+/*
+ * FLASH and environment organization
+ */
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_UBI			1
+#define CONFIG_SPL_UBI_MAX_VOL_LEBS	256
+#define CONFIG_SPL_UBI_MAX_PEB_SIZE	(256*1024)
+#define CONFIG_SPL_UBI_MAX_PEBS		4096
+#define CONFIG_SPL_UBI_VOL_IDS		8
+#define CONFIG_SPL_UBI_LOAD_MONITOR_ID	0
+#define CONFIG_SPL_UBI_LOAD_KERNEL_ID	3
+#define CONFIG_SPL_UBI_LOAD_ARGS_ID	4
+#define CONFIG_SPL_UBI_PEB_OFFSET	4
+#define CONFIG_SPL_UBI_VID_OFFSET	512
+#define CONFIG_SPL_UBI_LEB_START	2048
+#define CONFIG_SPL_UBI_INFO_ADDR	0x88080000
+
+#define CONFIG_ENV_IS_IN_UBI		1
+#define CONFIG_ENV_UBI_PART		"UBI"
+#define CONFIG_ENV_UBI_VOLUME		"config"
+#define CONFIG_ENV_UBI_VOLUME_REDUND	"config_r"
+#define CONFIG_UBI_SILENCE_MSG		1
+#define CONFIG_UBIFS_SILENCE_MSG	1
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+#define CONFIG_ENV_SIZE			(32*1024)
+
+#define CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT			"nand0=gpmc-nand.0"
+#define MTDPARTS_DEFAULT		"mtdparts=gpmc-nand.0:512k(SPL),-(UBI)"
+
 /* OneNAND boot config */
 #ifdef CONFIG_BOOT_ONENAND
 #define CONFIG_SPL_ONENAND_SUPPORT
-#define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
 #define CONFIG_SYS_ONENAND_PAGE_SIZE	2048
-#define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
-#define CONFIG_SPL_ONENAND_LOAD_SIZE    \
-	(512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
-
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+#define CONFIG_SYS_ONENAND_U_BOOT_OFFS	0x80000
 #endif
 
 /* NAND boot config */
 #ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
@@ -166,14 +182,8 @@
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_BCH
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS		0x240000
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
-#endif
 #endif
 
+#undef CONFIG_SPL_EXT_SUPPORT
+
 #endif /* __IGEP00X0_H */
-- 
2.1.4

  parent reply	other threads:[~2016-01-17  3:16 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-17  3:09 [U-Boot] [PATCHv4 0/7] spl: Lightweight UBI and UBI fastmap support Ladislav Michl
2016-01-17  3:11 ` [U-Boot] [PATCHv4 1/7] mtd: Sort subsystem directories aplhabeticaly in Makefile Ladislav Michl
2016-01-21  6:04   ` Heiko Schocher
2016-01-17  3:12 ` [U-Boot] [PATCHv4 2/7] nand_spl_simple: Add a simple NAND read function Ladislav Michl
2016-01-21  6:05   ` Heiko Schocher
2016-01-17  3:13 ` [U-Boot] [PATCHv4 3/7] spl: Lightweight UBI and UBI fastmap support Ladislav Michl
2016-01-17  3:13 ` [U-Boot] [PATCHv4 4/7] spl: support loading from UBI volumes Ladislav Michl
2016-01-21  6:06   ` Heiko Schocher
2016-01-17  3:15 ` [U-Boot] [PATCHv5 5/7] spl: zImage support in Falcon mode Ladislav Michl
2016-01-21  6:07   ` Heiko Schocher
2016-01-17  3:16 ` Ladislav Michl [this message]
2016-01-21  6:07   ` [U-Boot] [PATCHv7 6/7] igep00x0: UBIize Heiko Schocher
2016-01-22 22:35     ` Enric Balletbo Serra
2016-01-24 13:44       ` Ladislav Michl
2016-01-25  6:39       ` Heiko Schocher
2016-01-25  7:26         ` Enric Balletbo Serra
2016-01-25  8:13           ` Heiko Schocher
2016-01-25 15:56           ` Ladislav Michl
2016-01-25 16:56             ` Enric Balletbo Serra
2016-04-13  5:19               ` Heiko Schocher
2016-04-13 11:39                 ` Enric Balletbo Serra
2016-04-19 10:15                   ` Enric Balletbo Serra
2016-06-04 20:48             ` [U-Boot] [RFC] runtime mtdparts_default; was: " Ladislav Michl
2016-01-25 15:13         ` [U-Boot] [PATCHv7 6/7] " Tom Rini
2016-01-25 15:35           ` Heiko Schocher
2016-01-17  3:16 ` [U-Boot] [PATCHv4 7/7] igep00x0: Falcon mode Ladislav Michl
2016-01-21  6:08   ` Heiko Schocher
2016-01-22 22:38     ` Enric Balletbo Serra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160117031603.GG28493@localhost.localdomain \
    --to=ladis@linux-mips.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.