From: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
To: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
Tejun Heo <tj@kernel.org>, Jan Kara <jack@suse.com>,
Kyle McMartin <kyle@kernel.org>,
Dave Jones <davej@codemonkey.org.uk>,
Calvin Owens <calvinowens@fb.com>,
linux-kernel@vger.kernel.org,
Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Subject: Re: [RFC][PATCH -next 1/2] printk: move can_use_console out of console_trylock_for_printk
Date: Tue, 19 Jan 2016 09:42:36 +0900 [thread overview]
Message-ID: <20160119004236.GA4963@swordfish> (raw)
In-Reply-To: <20160118154228.GY3178@pathway.suse.cz>
Hello,
thanks for review.
On (01/18/16 16:42), Petr Mladek wrote:
> On Thu 2016-01-14 13:57:22, Sergey Senozhatsky wrote:
> > vprintk_emit() disables preemption around console_trylock_for_printk()
> > and console_unlock() calls for a strong reason -- can_use_console()
> > check. The thing is that vprintl_emit() can be called on a CPU that
> > is not fully brought up yet (!cpu_online()), which potentially can
> > cause problems if console driver accesses per-cpu data. A console
> > driver can explicitly state that it's safe to call it from !online
> > cpu by setting CON_ANYTIME bit in console ->flags. That's why for
> > !cpu_online() can_use_console() iterates all the console to find out
> > if there is a CON_ANYTIME console, otherwise console_unlock() must be
> > avoided.
> >
> > call_console_drivers(), called from console_cont_flush() and
> > console_unlock(), does the same test during for_each_console() loop.
> > However, we can have the following corner case. Assume that we have 2
> > cpus -- CPU0 is online, CPU1 is !online; and no CON_ANYTIME consoles
> > available.
> >
> > CPU0 online CPU1 !online
> > console_trylock()
> > ...
> > console_unlock()
>
> Please, where this console_unlock() comes from?
from UP* or DOWN* (_PREPARE f.e.) notifiers on this CPU, for example, we don't
know what's going on there. what prevents it from calling console_trylock(),
grabbing the console_sem and eventually doing console_unlock()? there is
a can_use_console() check, but it handles only one case -- printk().
there is also an extra '!cpu_online() && !CON_ANYTIME' test done for_each_console
in call_console_drivers(), but it's too late -- we already msg_print_text()
and advanced console_seq/console_idx/etc., the message will be lost, we
don't put it back.
> If I get this correctly, this CPU is not online and no CON_ANYTIME
> console exists
> => can_use_console() fails
> => console_trylock() fails
> => console_unlock() is not called from vprintk_emit().
the current flow is
vprintk_emit()
console_trylock_for_printk
can_use_console fails -- !cpu online and no CON_ANYTIME
console_unlock() is not called from vprintk_emit()
the missing path
console_trylock
console_unlock
for (;;) {
msg_print_text
call_console_drivers
!cpu_online && !CON_ANYTIME -- lost it and repeat again
}
the new one is
vprintk_emit()
console_trylock_for_printk -- ok
console_unlock
can_use_console fails -- !cpu online and no CON_ANYTIME
and it also covers the case
console_trylock -- detour can_use_console()
console_unlock
can_use_console fails -- !cpu online and no CON_ANYTIME, abort
-ss
next prev parent reply other threads:[~2016-01-19 0:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-14 4:57 [RFC][PATCH -next 0/2] cond_resched() some of console_trylock callers Sergey Senozhatsky
2016-01-14 4:57 ` [RFC][PATCH -next 1/2] printk: move can_use_console out of console_trylock_for_printk Sergey Senozhatsky
2016-01-14 5:59 ` [PATCH " Sergey Senozhatsky
2016-01-18 15:42 ` [RFC][PATCH -next " Petr Mladek
2016-01-19 0:42 ` Sergey Senozhatsky [this message]
2016-01-19 13:31 ` Petr Mladek
2016-01-19 15:00 ` Sergey Senozhatsky
2016-01-19 16:16 ` Petr Mladek
2016-01-20 4:18 ` Sergey Senozhatsky
2016-01-20 10:09 ` Petr Mladek
2016-01-14 4:57 ` [RFC][PATCH -next 2/2] printk: set may_schedule for some of console_trylock callers Sergey Senozhatsky
2016-01-17 14:11 ` Sergey Senozhatsky
2016-01-17 14:23 ` Sergey Senozhatsky
2016-01-18 16:17 ` Petr Mladek
2016-01-19 1:15 ` Sergey Senozhatsky
2016-01-19 15:18 ` Petr Mladek
2016-01-20 3:50 ` Sergey Senozhatsky
2016-01-20 11:51 ` Sergey Senozhatsky
2016-01-20 12:38 ` Petr Mladek
2016-01-20 12:31 ` Petr Mladek
2016-01-21 1:25 ` Sergey Senozhatsky
2016-01-21 5:51 ` Sergey Senozhatsky
2016-01-22 9:48 ` Petr Mladek
2016-01-23 4:46 ` Sergey Senozhatsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160119004236.GA4963@swordfish \
--to=sergey.senozhatsky.work@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=calvinowens@fb.com \
--cc=davej@codemonkey.org.uk \
--cc=jack@suse.com \
--cc=kyle@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmladek@suse.com \
--cc=sergey.senozhatsky@gmail.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.