[U-Boot] [PATCH v2] ARM: Disable "DISCARD" for secure section if CONFIG_ARMV7_SECURE_BASE isn't defined

[Tom Rini <trini@konsulko.com>]

On Mon, Jan 18, 2016 at 11:02:40AM +0800, Dongsheng Wang wrote:

> From: Wang Dongsheng <dongsheng.wang@nxp.com>
> 
> "DISCARD" will remove ._secure.text relocate, but PSCI framework
> has already used some absolute address those need to relocate.
> 
> Use readelf -t -r u-boot show us:
> .__secure_start		addr: 601408e4
> .__secure_end		addr: 60141460
> 
> 60141140  00000017 R_ARM_RELATIVE
> 46	_secure_monitor:
> 47	#ifdef CONFIG_ARMV7_PSCI
> 48      ldr     r5, =_psci_vectors
> 
> 60141194  00000017 R_ARM_RELATIVE
> 6014119c  00000017 R_ARM_RELATIVE
> 601411a4  00000017 R_ARM_RELATIVE
> 601411ac  00000017 R_ARM_RELATIVE
> 64	_psci_table:
> 66	.word	psci_cpu_suspend
> ...
> 72	.word	psci_migrate
> 
> 60141344  00000017 R_ARM_RELATIVE
> 6014145c  00000017 R_ARM_RELATIVE
> 202	ldr     r5, =psci_text_end
> 
> Solutions:
> 1. Change absolute address to RelAdr.
>    Based on LDR (immediate, ARM), we only have 4K offset to jump.
> Now PSCI code size is close to 4K size that is LDR limit jump size,
> so even if the LDR is based on the current instruction address,
> there is also have a risk for RelAdr. If we use two jump steps I
> think we can fix this issue, but looks too hack, so give up this way.
> 
> 2. Enable "DISCARD" only for CONFIG_ARMV7_SECURE_BASE has defined.
>    If CONFIG_ARMV7_SECURE_BASE is defined in platform, all of secure
> will in the BASE address that is absolute.
> 
> Signed-off-by: Wang Dongsheng <dongsheng.wang@nxp.com>
> 
> diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
> index d48a905..e148ab7 100644

Reviewed-by: Tom Rini <trini@konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160119/f8577e0e/attachment.sig>