[U-Boot] [PATCH][RE-SUBMIT] usb: gadget: dwc2_udc_otg: modified the check condition for max packet size of ep_in in high speed

[Lukasz Majewski <l.majewski@samsung.com>]

Hi Steve,

> From: Frank Wang <frank.wang@rock-chips.com>
> 
> In current high speed fastboot, fs_ep_in.wMaxPacketSize is configured
> 64 bytes as default, as a result, it failed to match the size at
> initialization stage in usb controller.
> Actually, hardware can support less than or equal to 512 bytes in
> high speed mode, so I changed the condition from  '!=' to '>' to fix
> this issue.
> 
> Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
> Tested-by: Steve Rae <srae@broadcom.com>
> ---
> 
>  drivers/usb/gadget/dwc2_udc_otg.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/gadget/dwc2_udc_otg.c
> b/drivers/usb/gadget/dwc2_udc_otg.c index 90ed5ff..19d6dcd 100644
> --- a/drivers/usb/gadget/dwc2_udc_otg.c
> +++ b/drivers/usb/gadget/dwc2_udc_otg.c
> @@ -565,8 +565,8 @@ static int dwc2_ep_enable(struct usb_ep *_ep,
>  	}
>  
>  	/* hardware _could_ do smaller, but driver doesn't */
> -	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
> -	     && le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)) !=
> +	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK &&
> +	     le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)) >
>  	     ep_maxpacket(ep))
> || !get_unaligned(&desc->wMaxPacketSize)) { 
>  		debug("%s: bad %s maxpacket\n", __func__, _ep->name);

Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>

Test HW: Trats - Exynos4210 (dwc2 udc controller).

@Marek: 

Should I pick this patch or will you take it?

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group