diff for duplicates of <20160130221509.GA28644@amd> diff --git a/a/1.txt b/N1/1.txt index 4131f3e..a6459d7 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -17,11 +17,11 @@ Hi! > > . That did not help. So I thought, ok, maybe rmmod is needed to > > trigger some powersaving? But that is not exactly easy to do: > > -> > pavel@n900:/my/tui/ofone$ sudo insmod /my/modules/omap2430.ko -> > pavel@n900:/my/tui/ofone$ sudo insmod /my/modules/phy-twl4030-usb.ko -> > pavel@n900:/my/tui/ofone$ sudo rmmod phy-twl4030-usb.ko +> > pavel at n900:/my/tui/ofone$ sudo insmod /my/modules/omap2430.ko +> > pavel at n900:/my/tui/ofone$ sudo insmod /my/modules/phy-twl4030-usb.ko +> > pavel at n900:/my/tui/ofone$ sudo rmmod phy-twl4030-usb.ko > > Error: Module phy_twl4030_usb is in use -> > pavel@n900:/my/tui/ofone$ +> > pavel at n900:/my/tui/ofone$ > > > > Any ideas what jumps to use the modules? Charger code? > @@ -42,14 +42,14 @@ Hi! > [ 184.681976] HS USB OTG: no transceiver configured > [ 184.682006] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed > with status -517 -> [ 187.690338] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: +> [ 187.690338] twl4030_usb 48070000.i2c:twl at 48:twl4030-usb: > Initialized TWL4030 USB module > [ 187.698303] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk > combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) > [ 187.698333] musb-hdrc: MHDRC RTL version 1.400 > [ 187.698333] musb-hdrc: setup fifo_mode 4 > [ 187.698394] musb-hdrc: 28/31 max ep, 16384/16384 memory -> pavel@n900:/my/tui/ofone$ +> pavel at n900:/my/tui/ofone$ I added following hack to phy-twl4030-usb.c so that I could avoid modules and module unloading problem. But still could not get it to diff --git a/a/content_digest b/N1/content_digest index b75386d..93f2ba4 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -4,20 +4,10 @@ "ref\020160126172527.GY3500@atomide.com\0" "ref\020160130200244.GA30429@amd\0" "ref\020160130201452.GC30429@amd\0" - "From\0Pavel Machek <pavel@ucw.cz>\0" - "Subject\0Re: N900 sleep mode (in 4.5-rc0, if that matters)\0" + "From\0pavel@ucw.cz (Pavel Machek)\0" + "Subject\0N900 sleep mode (in 4.5-rc0, if that matters)\0" "Date\0Sat, 30 Jan 2016 23:15:09 +0100\0" - "To\0Tony Lindgren <tony@atomide.com>\0" - "Cc\0pali.rohar@gmail.com" - sre@kernel.org - kernel list <linux-kernel@vger.kernel.org> - linux-arm-kernel <linux-arm-kernel@lists.infradead.org> - linux-omap@vger.kernel.org - khilman@kernel.org - aaro.koskinen@iki.fi - ivo.g.dimitrov.75@gmail.com - patrikbachan@gmail.com - " serge@hallyn.com\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Hi!\n" @@ -39,11 +29,11 @@ "> > . That did not help. So I thought, ok, maybe rmmod is needed to\n" "> > trigger some powersaving? But that is not exactly easy to do:\n" "> > \n" - "> > pavel@n900:/my/tui/ofone$ sudo insmod /my/modules/omap2430.ko\n" - "> > pavel@n900:/my/tui/ofone$ sudo insmod /my/modules/phy-twl4030-usb.ko\n" - "> > pavel@n900:/my/tui/ofone$ sudo rmmod phy-twl4030-usb.ko\n" + "> > pavel at n900:/my/tui/ofone$ sudo insmod /my/modules/omap2430.ko\n" + "> > pavel at n900:/my/tui/ofone$ sudo insmod /my/modules/phy-twl4030-usb.ko\n" + "> > pavel at n900:/my/tui/ofone$ sudo rmmod phy-twl4030-usb.ko\n" "> > Error: Module phy_twl4030_usb is in use\n" - "> > pavel@n900:/my/tui/ofone$\n" + "> > pavel at n900:/my/tui/ofone$\n" "> > \n" "> > Any ideas what jumps to use the modules? Charger code?\n" "> \n" @@ -64,14 +54,14 @@ "> [ 184.681976] HS USB OTG: no transceiver configured\n" "> [ 184.682006] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed\n" "> with status -517\n" - "> [ 187.690338] twl4030_usb 48070000.i2c:twl@48:twl4030-usb:\n" + "> [ 187.690338] twl4030_usb 48070000.i2c:twl at 48:twl4030-usb:\n" "> Initialized TWL4030 USB module\n" "> [ 187.698303] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk\n" "> combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)\n" "> [ 187.698333] musb-hdrc: MHDRC RTL version 1.400\n" "> [ 187.698333] musb-hdrc: setup fifo_mode 4\n" "> [ 187.698394] musb-hdrc: 28/31 max ep, 16384/16384 memory\n" - "> pavel@n900:/my/tui/ofone$\n" + "> pavel at n900:/my/tui/ofone$\n" "\n" "I added following hack to phy-twl4030-usb.c so that I could avoid\n" "modules and module unloading problem. But still could not get it to\n" @@ -176,4 +166,4 @@ "(english) http://www.livejournal.com/~pavelmachek\n" (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -a4244107e3c51f2fe0844adca9bc16cad9acd50b8607c2ddb0ba41a8e2ccff0b +8a4115c5f8376fe69407ddc1720333b0095bbd71078f3c2a20215e915f543a81
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.