diff for duplicates of <20160201121145.GE10671@tiger> diff --git a/a/1.txt b/N1/1.txt index 1777b99..f9a8060 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -2,7 +2,7 @@ On Wed, Jan 13, 2016 at 12:45:12PM -0800, Joshua Clayton wrote: > Uniwest evi is a portable electrical eddy current non-destructive > testing device. > -> Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> +> Signed-off-by: Joshua Clayton <stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > --- > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 30bbc37..c284cb6 100644 @@ -83,7 +83,7 @@ On Wed, Jan 13, 2016 at 12:45:12PM -0800, Joshua Clayton wrote: > + #address-cells = <1>; > + #size-cells = <0>; > + -> + reg_usbh1_vbus: regulator at 0 { +> + reg_usbh1_vbus: regulator@0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "usbh1_vbus"; @@ -106,7 +106,7 @@ we can name node in schema like: } > + -> + reg_usb_otg_vbus: regulator at 1 { +> + reg_usb_otg_vbus: regulator@1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "usb_otg_vbus"; @@ -179,7 +179,7 @@ way as ecspi3 and ecspi5, i.e. pinctrl_ecspi1_cs? Have a new line between properties and sub-node. -> + eeprom: m95m02 at 1 { +> + eeprom: m95m02@1 { > + compatible = "st,m95m02", "atmel,at25"; > + size = <262144>; > + pagesize = <256>; @@ -190,7 +190,7 @@ Have a new line between properties and sub-node. Have a new line between nodes. -> + pb_rtc: rtc at 3 { +> + pb_rtc: rtc@3 { > + compatible = "nxp,rtc-pcf2123"; > + spi-max-frequency = <2450000>; > + spi-cs-high; @@ -231,7 +231,7 @@ We generally put 'status' at the bottom of the property list. > + scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; > + -> + battery: sbs-battery at b { +> + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0x0b>; > + sbs,poll-retry-count = <100>; @@ -242,12 +242,12 @@ We generally put 'status' at the bottom of the property list. > +&ldb { > + status = "okay"; > + -> + lvds0: lvds-channel at 0 { +> + lvds0: lvds-channel@0 { > + fsl,data-mapping = "jeida"; > + fsl,data-width = <24>; > + status = "okay"; > + -> + port at 4 { +> + port@4 { > + reg = <4>; > + > + lvds0_out: endpoint { @@ -585,4 +585,8 @@ Shawn > -- > 2.5.0 > -> +> +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 8f311cb..c5a15d8 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,16 +1,27 @@ "ref\0b11bf2208fe30b96c4d82e634e8abe04343754de.1452717014.git.stillcompiling@gmail.com\0" "ref\066c87b9536b674bdedfdbe2306def8e9bf6a585c.1452717014.git.stillcompiling@gmail.com\0" - "From\0shawnguo@kernel.org (Shawn Guo)\0" - "Subject\0[PATCH 2/2] ARM: dts: Add dts for Uniwest evi\0" + "ref\066c87b9536b674bdedfdbe2306def8e9bf6a585c.1452717014.git.stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "From\0Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "Subject\0Re: [PATCH 2/2] ARM: dts: Add dts for Uniwest evi\0" "Date\0Mon, 1 Feb 2016 20:11:45 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Joshua Clayton <stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Cc\0Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>" + Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> + Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> + Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> + Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> + Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org> + Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + " linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\0" "\00:1\0" "b\0" "On Wed, Jan 13, 2016 at 12:45:12PM -0800, Joshua Clayton wrote:\n" "> Uniwest evi is a portable electrical eddy current non-destructive\n" "> testing device.\n" "> \n" - "> Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>\n" + "> Signed-off-by: Joshua Clayton <stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "> ---\n" "> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile\n" "> index 30bbc37..c284cb6 100644\n" @@ -91,7 +102,7 @@ "> +\t\t#address-cells = <1>;\n" "> +\t\t#size-cells = <0>;\n" "> +\n" - "> +\t\treg_usbh1_vbus: regulator at 0 {\n" + "> +\t\treg_usbh1_vbus: regulator@0 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <0>;\n" "> +\t\t\tregulator-name = \"usbh1_vbus\";\n" @@ -114,7 +125,7 @@ "\t}\n" "\n" "> +\n" - "> +\t\treg_usb_otg_vbus: regulator at 1 {\n" + "> +\t\treg_usb_otg_vbus: regulator@1 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tregulator-name = \"usb_otg_vbus\";\n" @@ -187,7 +198,7 @@ "\n" "Have a new line between properties and sub-node.\n" "\n" - "> +\teeprom: m95m02 at 1 {\n" + "> +\teeprom: m95m02@1 {\n" "> +\t\tcompatible = \"st,m95m02\", \"atmel,at25\";\n" "> +\t\tsize = <262144>;\n" "> +\t\tpagesize = <256>;\n" @@ -198,7 +209,7 @@ "\n" "Have a new line between nodes.\n" "\n" - "> +\tpb_rtc: rtc at 3 {\n" + "> +\tpb_rtc: rtc@3 {\n" "> +\t\tcompatible = \"nxp,rtc-pcf2123\";\n" "> +\t\tspi-max-frequency = <2450000>;\n" "> +\t\tspi-cs-high;\n" @@ -239,7 +250,7 @@ "> +\tscl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;\n" "> +\tsda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;\n" "> +\n" - "> +\tbattery: sbs-battery at b {\n" + "> +\tbattery: sbs-battery@b {\n" "> +\t\tcompatible = \"sbs,sbs-battery\";\n" "> +\t\treg = <0x0b>;\n" "> +\t\tsbs,poll-retry-count = <100>;\n" @@ -250,12 +261,12 @@ "> +&ldb {\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tlvds0: lvds-channel at 0 {\n" + "> +\tlvds0: lvds-channel@0 {\n" "> +\t\tfsl,data-mapping = \"jeida\";\n" "> +\t\tfsl,data-width = <24>;\n" "> +\t\tstatus = \"okay\";\n" "> +\n" - "> +\t\tport at 4 {\n" + "> +\t\tport@4 {\n" "> +\t\t\treg = <4>;\n" "> +\n" "> +\t\t\tlvds0_out: endpoint {\n" @@ -593,6 +604,10 @@ "> -- \n" "> 2.5.0\n" "> \n" - > + "> \n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -3f335f9e3282df7a60f905c768070b8897c4567266dca42bbe47ef74bf8f0da6 +662f44d4970cc3f5142283220c1c259b3c34df897bdd8845f7053c07f8c450a4
diff --git a/a/1.txt b/N2/1.txt index 1777b99..323f0c9 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -83,7 +83,7 @@ On Wed, Jan 13, 2016 at 12:45:12PM -0800, Joshua Clayton wrote: > + #address-cells = <1>; > + #size-cells = <0>; > + -> + reg_usbh1_vbus: regulator at 0 { +> + reg_usbh1_vbus: regulator@0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "usbh1_vbus"; @@ -106,7 +106,7 @@ we can name node in schema like: } > + -> + reg_usb_otg_vbus: regulator at 1 { +> + reg_usb_otg_vbus: regulator@1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "usb_otg_vbus"; @@ -179,7 +179,7 @@ way as ecspi3 and ecspi5, i.e. pinctrl_ecspi1_cs? Have a new line between properties and sub-node. -> + eeprom: m95m02 at 1 { +> + eeprom: m95m02@1 { > + compatible = "st,m95m02", "atmel,at25"; > + size = <262144>; > + pagesize = <256>; @@ -190,7 +190,7 @@ Have a new line between properties and sub-node. Have a new line between nodes. -> + pb_rtc: rtc at 3 { +> + pb_rtc: rtc@3 { > + compatible = "nxp,rtc-pcf2123"; > + spi-max-frequency = <2450000>; > + spi-cs-high; @@ -231,7 +231,7 @@ We generally put 'status' at the bottom of the property list. > + scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; > + -> + battery: sbs-battery at b { +> + battery: sbs-battery@b { > + compatible = "sbs,sbs-battery"; > + reg = <0x0b>; > + sbs,poll-retry-count = <100>; @@ -242,12 +242,12 @@ We generally put 'status' at the bottom of the property list. > +&ldb { > + status = "okay"; > + -> + lvds0: lvds-channel at 0 { +> + lvds0: lvds-channel@0 { > + fsl,data-mapping = "jeida"; > + fsl,data-width = <24>; > + status = "okay"; > + -> + port at 4 { +> + port@4 { > + reg = <4>; > + > + lvds0_out: endpoint { diff --git a/a/content_digest b/N2/content_digest index 8f311cb..ffa04e9 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,9 +1,19 @@ "ref\0b11bf2208fe30b96c4d82e634e8abe04343754de.1452717014.git.stillcompiling@gmail.com\0" "ref\066c87b9536b674bdedfdbe2306def8e9bf6a585c.1452717014.git.stillcompiling@gmail.com\0" - "From\0shawnguo@kernel.org (Shawn Guo)\0" - "Subject\0[PATCH 2/2] ARM: dts: Add dts for Uniwest evi\0" + "From\0Shawn Guo <shawnguo@kernel.org>\0" + "Subject\0Re: [PATCH 2/2] ARM: dts: Add dts for Uniwest evi\0" "Date\0Mon, 1 Feb 2016 20:11:45 +0800\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Joshua Clayton <stillcompiling@gmail.com>\0" + "Cc\0Rob Herring <robh+dt@kernel.org>" + Pawel Moll <pawel.moll@arm.com> + Mark Rutland <mark.rutland@arm.com> + Ian Campbell <ijc+devicetree@hellion.org.uk> + Kumar Gala <galak@codeaurora.org> + Russell King <linux@arm.linux.org.uk> + Sascha Hauer <kernel@pengutronix.de> + devicetree@vger.kernel.org + linux-arm-kernel@lists.infradead.org + " linux-kernel@vger.kernel.org\0" "\00:1\0" "b\0" "On Wed, Jan 13, 2016 at 12:45:12PM -0800, Joshua Clayton wrote:\n" @@ -91,7 +101,7 @@ "> +\t\t#address-cells = <1>;\n" "> +\t\t#size-cells = <0>;\n" "> +\n" - "> +\t\treg_usbh1_vbus: regulator at 0 {\n" + "> +\t\treg_usbh1_vbus: regulator@0 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <0>;\n" "> +\t\t\tregulator-name = \"usbh1_vbus\";\n" @@ -114,7 +124,7 @@ "\t}\n" "\n" "> +\n" - "> +\t\treg_usb_otg_vbus: regulator at 1 {\n" + "> +\t\treg_usb_otg_vbus: regulator@1 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tregulator-name = \"usb_otg_vbus\";\n" @@ -187,7 +197,7 @@ "\n" "Have a new line between properties and sub-node.\n" "\n" - "> +\teeprom: m95m02 at 1 {\n" + "> +\teeprom: m95m02@1 {\n" "> +\t\tcompatible = \"st,m95m02\", \"atmel,at25\";\n" "> +\t\tsize = <262144>;\n" "> +\t\tpagesize = <256>;\n" @@ -198,7 +208,7 @@ "\n" "Have a new line between nodes.\n" "\n" - "> +\tpb_rtc: rtc at 3 {\n" + "> +\tpb_rtc: rtc@3 {\n" "> +\t\tcompatible = \"nxp,rtc-pcf2123\";\n" "> +\t\tspi-max-frequency = <2450000>;\n" "> +\t\tspi-cs-high;\n" @@ -239,7 +249,7 @@ "> +\tscl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;\n" "> +\tsda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;\n" "> +\n" - "> +\tbattery: sbs-battery at b {\n" + "> +\tbattery: sbs-battery@b {\n" "> +\t\tcompatible = \"sbs,sbs-battery\";\n" "> +\t\treg = <0x0b>;\n" "> +\t\tsbs,poll-retry-count = <100>;\n" @@ -250,12 +260,12 @@ "> +&ldb {\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tlvds0: lvds-channel at 0 {\n" + "> +\tlvds0: lvds-channel@0 {\n" "> +\t\tfsl,data-mapping = \"jeida\";\n" "> +\t\tfsl,data-width = <24>;\n" "> +\t\tstatus = \"okay\";\n" "> +\n" - "> +\t\tport at 4 {\n" + "> +\t\tport@4 {\n" "> +\t\t\treg = <4>;\n" "> +\n" "> +\t\t\tlvds0_out: endpoint {\n" @@ -595,4 +605,4 @@ "> \n" > -3f335f9e3282df7a60f905c768070b8897c4567266dca42bbe47ef74bf8f0da6 +e0c9a4e02008504d242ba9c8ddf508ae351a12cbd4d9cd6b1b7067383116d0b9
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.