Re: [PATCH] power: bq27xxx_battery: Restore device name

["Pali Rohár" <pali.rohar@gmail.com>]

On Tuesday 02 February 2016 14:15:19 Ivaylo Dimitrov wrote:
> Patch <703df6c097956d17a818e63961c82e8e9eef9fef> ("power: bq27xxx_battery:
>  Reorganize I2C into a module") has removed the device name numbering from
> bq27xxx_battery_i2c_probe. Fix that by restoring the code.
> 
> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
> ---
>  drivers/power/bq27xxx_battery_i2c.c | 32 +++++++++++++++++++++++++++++---
>  1 file changed, 29 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/bq27xxx_battery_i2c.c b/drivers/power/bq27xxx_battery_i2c.c
> index b810e08..d98cdc5 100644
> --- a/drivers/power/bq27xxx_battery_i2c.c
> +++ b/drivers/power/bq27xxx_battery_i2c.c
> @@ -21,6 +21,9 @@
>  
>  #include <linux/power/bq27xxx_battery.h>
>  
> +static DEFINE_IDR(battery_id);
> +static DEFINE_MUTEX(battery_mutex);
> +
>  static irqreturn_t bq27xxx_battery_irq_handler_thread(int irq, void *data)
>  {
>  	struct bq27xxx_device_info *di = data;
> @@ -70,19 +73,32 @@ static int bq27xxx_battery_i2c_probe(struct i2c_client *client,
>  {
>  	struct bq27xxx_device_info *di;
>  	int ret;
> +	char *name;
> +	int num;
> +
> +	/* Get new ID for the new battery device */
> +	mutex_lock(&battery_mutex);
> +	num = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL);
> +	mutex_unlock(&battery_mutex);
> +	if (num < 0)
> +		return num;
> +
> +	name = devm_kasprintf(&client->dev, GFP_KERNEL, "%s-%d", id->name, num);
> +	if (!name)
> +		goto err_mem;
>  
>  	di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL);
>  	if (!di)
> -		return -ENOMEM;
> +		goto err_mem;
>  
>  	di->dev = &client->dev;
>  	di->chip = id->driver_data;
> -	di->name = id->name;
> +	di->name = name;
>  	di->bus.read = bq27xxx_battery_i2c_read;
>  
>  	ret = bq27xxx_battery_setup(di);
>  	if (ret)
> -		return ret;
> +		goto err_failed;
>  
>  	/* Schedule a polling after about 1 min */
>  	schedule_delayed_work(&di->work, 60 * HZ);
> @@ -103,6 +119,16 @@ static int bq27xxx_battery_i2c_probe(struct i2c_client *client,
>  	}
>  
>  	return 0;
> +
> +err_mem:
> +	ret = -ENOMEM;
> +
> +err_failed:
> +	mutex_lock(&battery_mutex);
> +	idr_remove(&battery_id, num);
> +	mutex_unlock(&battery_mutex);
> +
> +	return ret;
>  }
>  
>  static int bq27xxx_battery_i2c_remove(struct i2c_client *client)

Hi! Should not we call idr_remove() also in bq27xxx_battery_i2c_remove()?

-- 
Pali Rohár
pali.rohar@gmail.com