From mboxrd@z Thu Jan 1 00:00:00 1970 Sender: Michael Welling Date: Wed, 3 Feb 2016 09:18:02 -0600 From: Michael Welling Message-ID: <20160203151802.GC25464@deathstar> References: <20160203145146.GB25464@deathstar> <20160203150448.GF32138@hermes.click-hack.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20160203150448.GF32138@hermes.click-hack.org> Subject: Re: [Xenomai] RT FEC net driver for IMX6Q List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Gilles Chanteperdrix Cc: xenomai@xenomai.org On Wed, Feb 03, 2016 at 04:04:48PM +0100, Gilles Chanteperdrix wrote: > On Wed, Feb 03, 2016 at 08:51:46AM -0600, Michael Welling wrote: > > Is there any specific reason why the fec driver is restricted to the PPC > > arcitecture? > > In its current state, the driver does not compile for IMX6. A broken > patch has been proposed, my idea is to work on RTnet core before > tackling the drivers, but if a patch fixing the build for imx6 is > proposed, it could be re-enabled. > What are the issues with the RTnet core? I just found out the hard way that the driver does not compile. I will try my best to update the IMX drivers so that they build with 3.18.20. > > > > The driver appears to have bindings for the IMX ARM controllers. > > > > Can this driver be used with the IMX6Q processor? > > > > > > _______________________________________________ > > Xenomai mailing list > > Xenomai@xenomai.org > > http://xenomai.org/mailman/listinfo/xenomai > > -- > Gilles. > https://click-hack.org