From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 5/8] drm/i915: put the IOSF port defines in numerical order
Date: Thu, 4 Feb 2016 18:05:59 +0200 [thread overview]
Message-ID: <20160204160559.GN23290@intel.com> (raw)
In-Reply-To: <a89f10d2d1954ac1b9a278534cb5209973354caa.1454582914.git.jani.nikula@intel.com>
On Thu, Feb 04, 2016 at 12:50:53PM +0200, Jani Nikula wrote:
> Make it easier to spot duplicates.
>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c0bd691b41f8..f3b4b19198b9 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -610,16 +610,16 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
> #define IOSF_BYTE_ENABLES_SHIFT 4
> #define IOSF_BAR_SHIFT 1
> #define IOSF_SB_BUSY (1<<0)
> -#define IOSF_PORT_BUNIT 0x3
> -#define IOSF_PORT_PUNIT 0x4
> +#define IOSF_PORT_BUNIT 0x03
> +#define IOSF_PORT_PUNIT 0x04
> #define IOSF_PORT_NC 0x11
> #define IOSF_PORT_DPIO 0x12
> -#define IOSF_PORT_DPIO_2 0x1a
> #define IOSF_PORT_GPIO_NC 0x13
> #define IOSF_PORT_CCK 0x14
> -#define IOSF_PORT_CCU 0xA9
> +#define IOSF_PORT_DPIO_2 0x1a
> +#define IOSF_PORT_FLISDSI 0x1b
> #define IOSF_PORT_GPS_CORE 0x48
> -#define IOSF_PORT_FLISDSI 0x1B
> +#define IOSF_PORT_CCU 0xa9
> #define VLV_IOSF_DATA _MMIO(VLV_DISPLAY_BASE + 0x2104)
> #define VLV_IOSF_ADDR _MMIO(VLV_DISPLAY_BASE + 0x2108)
>
> --
> 2.1.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-02-04 16:06 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 10:50 [PATCH 0/8] drm/i915/dsi: i2c/gpio Jani Nikula
2016-02-04 10:50 ` [PATCH 1/8] drm/i915/dsi: defend gpio table against out of bounds access Jani Nikula
2016-02-04 15:40 ` Ville Syrjälä
2016-02-04 10:50 ` [PATCH 2/8] drm/i915/dsi: don't pass arbitrary data to sideband Jani Nikula
2016-02-04 15:41 ` Ville Syrjälä
2016-02-04 16:56 ` Jani Nikula
2016-02-04 10:50 ` [PATCH 3/8] drm/i915: Adding the parsing logic for the i2c element Jani Nikula
2016-02-04 15:28 ` Ville Syrjälä
2016-02-04 16:21 ` Jani Nikula
2016-02-04 16:36 ` Ville Syrjälä
2016-02-15 16:48 ` Daniel Vetter
2016-02-04 10:50 ` [PATCH 4/8] drm/i915/dsi: skip gpio element execution when not supported Jani Nikula
2016-02-04 15:36 ` Ville Syrjälä
2016-02-04 16:52 ` [PATCH v2] " Jani Nikula
2016-02-04 17:05 ` Ville Syrjälä
2016-02-04 17:10 ` Jani Nikula
2016-02-04 17:12 ` Jani Nikula
2016-02-04 17:18 ` Ville Syrjälä
2016-02-04 17:22 ` Jani Nikula
2016-02-04 17:48 ` Ville Syrjälä
2016-02-04 17:49 ` Ville Syrjälä
2016-02-04 18:39 ` Jani Nikula
2016-02-04 10:50 ` [PATCH 5/8] drm/i915: put the IOSF port defines in numerical order Jani Nikula
2016-02-04 16:05 ` Ville Syrjälä [this message]
2016-02-04 10:50 ` [PATCH 6/8] drm/i915/vlv: drop unused vlv_gps_core_read/write functions Jani Nikula
2016-02-04 16:12 ` Ville Syrjälä
2016-02-04 16:57 ` Jani Nikula
2016-02-04 10:50 ` [PATCH 7/8] drm/i915: Extend gpio read/write to other cores Jani Nikula
2016-02-04 15:39 ` Ville Syrjälä
2016-02-04 16:55 ` [PATCH v5] " Jani Nikula
2016-02-04 17:03 ` Ville Syrjälä
2016-02-04 17:14 ` Jani Nikula
2016-02-04 10:50 ` [PATCH 8/8] drm/i915/dsi: Added the generic gpio sequence support and gpio table Jani Nikula
2016-02-04 17:51 ` Ville Syrjälä
2016-02-04 12:46 ` ✓ Fi.CI.BAT: success for drm/i915/dsi: i2c/gpio Patchwork
2016-02-05 7:31 ` ✗ Fi.CI.BAT: failure for drm/i915/dsi: i2c/gpio (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160204160559.GN23290@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.