From: Lee Jones <lee.jones@linaro.org>
To: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: linux-kernel@vger.kernel.org, patches@opensource.wolfsonmicro.com
Subject: Re: [PATCH RESEND 3/7] mfd: wm8998: Fix defaults array based on testing
Date: Wed, 10 Feb 2016 16:17:16 +0000 [thread overview]
Message-ID: <20160210161716.GF3782@x1> (raw)
In-Reply-To: <1455015123-20506-4-git-send-email-ckeepax@opensource.wolfsonmicro.com>
On Tue, 09 Feb 2016, Charles Keepax wrote:
> My automated test is back and now can check defaults against the actual
> hardware. This patch updates the defaults array for the differences
> detected and removes a couple of completely unused registers.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> drivers/mfd/wm8998-tables.c | 12 ++----------
> 1 file changed, 2 insertions(+), 10 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/wm8998-tables.c b/drivers/mfd/wm8998-tables.c
> index 4c2dce77..a0de300 100644
> --- a/drivers/mfd/wm8998-tables.c
> +++ b/drivers/mfd/wm8998-tables.c
> @@ -229,8 +229,6 @@ static const struct reg_default wm8998_reg_default[] = {
> { 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */
> { 0x00000175, 0x0004 }, /* R373 - FLL1 Control 5 */
> { 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */
> - { 0x00000177, 0x0181 }, /* R375 - FLL1 Loop Filter Test 1 */
> - { 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */
> { 0x00000179, 0x0000 }, /* R377 - FLL1 Control 7 */
> { 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */
> { 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */
> @@ -247,8 +245,6 @@ static const struct reg_default wm8998_reg_default[] = {
> { 0x00000194, 0x007D }, /* R404 - FLL2 Control 4 */
> { 0x00000195, 0x0004 }, /* R405 - FLL2 Control 5 */
> { 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */
> - { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */
> - { 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */
> { 0x00000199, 0x0000 }, /* R409 - FLL2 Control 7 */
> { 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */
> { 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */
> @@ -320,7 +316,7 @@ static const struct reg_default wm8998_reg_default[] = {
> { 0x00000434, 0x0000 }, /* R1076 - Output Path Config 5R */
> { 0x00000435, 0x0180 }, /* R1077 - DAC Digital Volume 5R */
> { 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */
> - { 0x00000440, 0x8FFF }, /* R1088 - DRE Enable */
> + { 0x00000440, 0x002F }, /* R1088 - DRE Enable */
> { 0x00000441, 0xC759 }, /* R1089 - DRE Control 1 */
> { 0x00000442, 0x2A08 }, /* R1089 - DRE Control 2 */
> { 0x00000443, 0x5CFA }, /* R1089 - DRE Control 3 */
> @@ -686,7 +682,7 @@ static const struct reg_default wm8998_reg_default[] = {
> { 0x00000C10, 0x1000 }, /* R3088 - GPIO Debounce Config */
> { 0x00000C18, 0x0000 }, /* R3096 - GP Switch 1 */
> { 0x00000C20, 0x8002 }, /* R3104 - Misc Pad Ctrl 1 */
> - { 0x00000C21, 0x8001 }, /* R3105 - Misc Pad Ctrl 2 */
> + { 0x00000C21, 0x0001 }, /* R3105 - Misc Pad Ctrl 2 */
> { 0x00000C22, 0x0000 }, /* R3106 - Misc Pad Ctrl 3 */
> { 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */
> { 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */
> @@ -888,8 +884,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg)
> case ARIZONA_FLL1_CONTROL_5:
> case ARIZONA_FLL1_CONTROL_6:
> case ARIZONA_FLL1_CONTROL_7:
> - case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
> - case ARIZONA_FLL1_NCO_TEST_0:
> case ARIZONA_FLL1_SYNCHRONISER_1:
> case ARIZONA_FLL1_SYNCHRONISER_2:
> case ARIZONA_FLL1_SYNCHRONISER_3:
> @@ -906,8 +900,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg)
> case ARIZONA_FLL2_CONTROL_5:
> case ARIZONA_FLL2_CONTROL_6:
> case ARIZONA_FLL2_CONTROL_7:
> - case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
> - case ARIZONA_FLL2_NCO_TEST_0:
> case ARIZONA_FLL2_SYNCHRONISER_1:
> case ARIZONA_FLL2_SYNCHRONISER_2:
> case ARIZONA_FLL2_SYNCHRONISER_3:
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2016-02-10 16:17 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 10:51 [PATCH 0/7] Minor Arizona MFD Cleanups Charles Keepax
2016-02-09 10:51 ` [PATCH RESEND 1/7] mfd: wm5110: Fix defaults array based on testing Charles Keepax
2016-02-10 16:16 ` Lee Jones
2016-02-09 10:51 ` [PATCH RESEND 2/7] mfd: wm5102: " Charles Keepax
2016-02-10 16:17 ` Lee Jones
2016-02-09 10:51 ` [PATCH RESEND 3/7] mfd: wm8998: " Charles Keepax
2016-02-10 16:17 ` Lee Jones [this message]
2016-02-09 10:52 ` [PATCH RESEND 4/7] mfd: cs47l24: " Charles Keepax
2016-02-10 16:17 ` Lee Jones
2016-02-09 10:52 ` [PATCH RESEND 5/7] mfd: arizona: Remove duplicate select of MFD_CORE Charles Keepax
2016-02-10 16:18 ` Lee Jones
2016-02-09 10:52 ` [PATCH RESEND 6/7] mfd: arizona: Update small typo in Arizona SPI Kconfig Charles Keepax
2016-02-10 16:16 ` Lee Jones
2016-02-09 10:52 ` [PATCH RESEND 7/7] mfd: arizona: Allow building Arizona MFD as a module Charles Keepax
2016-02-09 12:38 ` Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160210161716.GF3782@x1 \
--to=lee.jones@linaro.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.