From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] ARM: mvebu: add NAND description to Armada 370 DB and Armada XP DB
Date: Wed, 10 Feb 2016 18:18:51 +0100 [thread overview]
Message-ID: <20160210171851.GD9492@lunn.ch> (raw)
In-Reply-To: <1455121756-20804-2-git-send-email-thomas.petazzoni@free-electrons.com>
On Wed, Feb 10, 2016 at 05:29:16PM +0100, Thomas Petazzoni wrote:
> This commit adds the Device Tree description for the 1GB NAND flash
> present in the Armada 370 DB and Armada XP DB evaluation boards from
> Marvell.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Thanks
Andrew
> ---
> Changes since v1:
> - Use the new MTD partitions DT binding, with all partitions grouped
> into a 'partitions' subnode. Suggested by Andrew Lunn.
> ---
> arch/arm/boot/dts/armada-370-db.dts | 27 +++++++++++++++++++++++++++
> arch/arm/boot/dts/armada-xp-db.dts | 28 ++++++++++++++++++++++++++++
> 2 files changed, 55 insertions(+)
>
> diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
> index bb280de..2364fc5 100644
> --- a/arch/arm/boot/dts/armada-370-db.dts
> +++ b/arch/arm/boot/dts/armada-370-db.dts
> @@ -168,6 +168,33 @@
> spi-max-frequency = <50000000>;
> };
> };
> +
> + nand at d0000 {
> + status = "okay";
> + num-cs = <1>;
> + marvell,nand-keep-config;
> + marvell,nand-enable-arbiter;
> + nand-on-flash-bbt;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0 0x800000>;
> + };
> + partition at 800000 {
> + label = "Linux";
> + reg = <0x800000 0x800000>;
> + };
> + partition at 1000000 {
> + label = "Filesystem";
> + reg = <0x1000000 0x3f000000>;
> + };
> + };
> + };
> };
>
> pcie-controller {
> diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
> index f774101..96aaaed 100644
> --- a/arch/arm/boot/dts/armada-xp-db.dts
> +++ b/arch/arm/boot/dts/armada-xp-db.dts
> @@ -229,6 +229,34 @@
> spi-max-frequency = <20000000>;
> };
> };
> +
> + nand at d0000 {
> + status = "okay";
> + num-cs = <1>;
> + marvell,nand-keep-config;
> + marvell,nand-enable-arbiter;
> + nand-on-flash-bbt;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 0 {
> + label = "U-Boot";
> + reg = <0 0x800000>;
> + };
> + partition at 800000 {
> + label = "Linux";
> + reg = <0x800000 0x800000>;
> + };
> + partition at 1000000 {
> + label = "Filesystem";
> + reg = <0x1000000 0x3f000000>;
> +
> + };
> + };
> + };
> };
> };
> };
> --
> 2.6.4
>
next prev parent reply other threads:[~2016-02-10 17:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-10 16:29 [PATCH v2 1/2] ARM: mvebu: use armada-370-sata for SATA on Armada 375 Thomas Petazzoni
2016-02-10 16:29 ` Thomas Petazzoni
2016-02-10 16:29 ` [PATCH v2 2/2] ARM: mvebu: add NAND description to Armada 370 DB and Armada XP DB Thomas Petazzoni
2016-02-10 17:18 ` Andrew Lunn [this message]
2016-02-12 16:50 ` Gregory CLEMENT
2016-02-10 17:17 ` [PATCH v2 1/2] ARM: mvebu: use armada-370-sata for SATA on Armada 375 Andrew Lunn
2016-02-10 17:17 ` Andrew Lunn
2016-02-12 16:49 ` Gregory CLEMENT
2016-02-12 16:49 ` Gregory CLEMENT
-- strict thread matches above, loose matches on Subject: below --
2016-01-27 15:24 [PATCH 0/2] ARM: mvebu: misc DT improvements Thomas Petazzoni
2016-01-27 15:24 ` [PATCH v2 2/2] ARM: mvebu: add NAND description to Armada 370 DB and Armada XP DB Thomas Petazzoni
2016-01-27 17:16 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160210171851.GD9492@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.