From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 15 Feb 2016 13:59:41 +0100 From: Gilles Chanteperdrix Message-ID: <20160215125941.GD9903@hermes.click-hack.org> References: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable In-Reply-To: Subject: Re: [Xenomai] Problem with rt_igb driver for I210 card List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: "GEORGE, Laurent" Cc: xenomai@xenomai.org On Mon, Feb 15, 2016 at 01:48:57PM +0100, GEORGE, Laurent wrote: > Hi, >=20 > I have dowloaded and tested the stable version of Xenoma=EF 3 including a > support for the I210 (Intel) card, available at the following git: >=20 > https://git.xenomai.org/xenomai-3.git/commit/?h=3Dnext&id=3D8268c5e87cf0a= c5223d98a86918b9420a0e94382 >=20 > I have the following problem: >=20 > The Installation of Xenomai went well. When I load rt_igb.ko module, the > rteth0 interface for Intel i210 NIC goes up well but there are following 2 > issues: >=20 > a) when I try the rtsolicit command to add devices in network, it doesn't > work "It does not work" is a bit vague. Do you wait for the link to be up before sending the solicit? Does it return an error? Does it send a packet but receive no answer? Some other case? > b) When I try to remove rt_igb module after taking down rteth0 interface = it > hangs and the only way to get back is a hard restart by pressing the > restart button on PC. Maybe the kernel crashed and capturing the console ideally via serial port, failing that via netconsole would help? Regards. --=20 Gilles. https://click-hack.org