diff for duplicates of <20160228064326.GG22051@tiger> diff --git a/a/1.txt b/N1/1.txt index 5274fe4..03082f5 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,4 +1,4 @@ -On Wed, Jan 20, 2016 at 11:09:09AM +0100, Lothar Waßmann wrote: +On Wed, Jan 20, 2016 at 11:09:09AM +0100, Lothar Wa?mann wrote: > The TXUL-0010/-0011 modules are Computers On Module manufactured by > Ka-Ro electronics GmbH with the following characteristics: > Processor Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz @@ -6,10 +6,10 @@ On Wed, Jan 20, 2016 at 11:09:09AM +0100, Lothar Waßmann wrote: > ROM 128MB NAND Flash (TXUL-0010) / 4GB eMMC (TXUL-0011) > Power supply Single 3.3 to 5V > Size 26mm SO-DIMM -> Temp. Range -40°C to 85°C +> Temp. Range -40?C to 85?C > > -> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> +> Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de> > --- > arch/arm/boot/dts/Makefile | 4 +- > arch/arm/boot/dts/imx6ul-txul-0010.dts | 54 ++ @@ -42,7 +42,7 @@ On Wed, Jan 20, 2016 at 11:09:09AM +0100, Lothar Waßmann wrote: > +++ b/arch/arm/boot/dts/imx6ul-txul-0010.dts > @@ -0,0 +1,54 @@ > +/* -> + * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> +> + * Copyright 2015 Lothar Wa?mann <LW@KARO-electronics.de> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -105,7 +105,7 @@ Why is this deletion of mmc1 needed? > +++ b/arch/arm/boot/dts/imx6ul-txul-0011.dts > @@ -0,0 +1,85 @@ > +/* -> + * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> +> + * Copyright 2015 Lothar Wa?mann <LW@KARO-electronics.de> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -200,7 +200,7 @@ function nodes), we can save this container node. > +++ b/arch/arm/boot/dts/imx6ul-txul.dtsi > @@ -0,0 +1,962 @@ > +/* -> + * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> +> + * Copyright 2015 Lothar Wa?mann <LW@KARO-electronics.de> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -278,7 +278,7 @@ function nodes), we can save this container node. Have a new line here. -> + mclk: clock@0 { +> + mclk: clock at 0 { > + compatible = "fixed-clock"; > + reg = <0>; > + #clock-cells = <0>; @@ -328,7 +328,7 @@ With no real keys defined? If so, please drop it. > + clock-frequency = <400000>; > + status = "okay"; > + -> + ds1339: rtc@68 { +> + ds1339: rtc at 68 { > + compatible = "dallas,ds1339"; > + reg = <0x68>; > + status = "disabled"; @@ -359,7 +359,7 @@ schema: > + #address-cells = <1>; > + #size-cells = <0>; > + -> + reg_3v3_etn: regulator@0 { +> + reg_3v3_etn: regulator at 0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "3V3_ETN"; @@ -371,7 +371,7 @@ schema: > + enable-active-high; > + }; > + -> + reg_2v5: regulator@1 { +> + reg_2v5: regulator at 1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "2V5"; @@ -380,7 +380,7 @@ schema: > + regulator-always-on; > + }; > + -> + reg_3v3: regulator@2 { +> + reg_3v3: regulator at 2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "3V3"; @@ -389,7 +389,7 @@ schema: > + regulator-always-on; > + }; > + -> + reg_can_xcvr: regulator@3 { +> + reg_can_xcvr: regulator at 3 { > + compatible = "regulator-fixed"; > + reg = <3>; > + regulator-name = "CAN XCVR"; @@ -401,7 +401,7 @@ schema: > + enable-active-low; > + }; > + -> + reg_lcd_pwr: regulator@5 { +> + reg_lcd_pwr: regulator at 5 { > + compatible = "regulator-fixed"; > + reg = <5>; > + regulator-name = "LCD POWER"; @@ -415,7 +415,7 @@ schema: > + regulator-always-on; > + }; > + -> + reg_lcd_reset: regulator@6 { +> + reg_lcd_reset: regulator at 6 { > + compatible = "regulator-fixed"; > + reg = <6>; > + regulator-name = "LCD RESET"; @@ -429,7 +429,7 @@ schema: > + regulator-always-on; > + }; > + -> + reg_usbh1_vbus: regulator@7 { +> + reg_usbh1_vbus: regulator at 7 { > + compatible = "regulator-fixed"; > + reg = <7>; > + regulator-name = "usbh1_vbus"; @@ -441,7 +441,7 @@ schema: > + enable-active-high; > + }; > + -> + reg_usbotg_vbus: regulator@8 { +> + reg_usbotg_vbus: regulator at 8 { > + compatible = "regulator-fixed"; > + reg = <8>; > + regulator-name = "usbotg_vbus"; @@ -470,13 +470,13 @@ schema: > + >; > + status = "disabled"; > + -> + spi@0 { +> + spi at 0 { > + compatible = "spidev"; > + reg = <0>; > + spi-max-frequency = <660000>; > + }; > + -> + spi@1 { +> + spi at 1 { > + compatible = "spidev"; > + reg = <1>; > + spi-max-frequency = <660000>; @@ -534,13 +534,13 @@ schema: > + >; > + status = "disabled"; > + -> + spi@0 { +> + spi at 0 { > + compatible = "spidev"; > + reg = <0>; > + spi-max-frequency = <60000000>; > + }; > + -> + spi@1 { +> + spi at 1 { > + compatible = "spidev"; > + reg = <1>; > + spi-max-frequency = <60000000>; @@ -560,7 +560,7 @@ schema: > + #address-cells = <1>; > + #size-cells = <0>; > + -> + etnphy0: ethernet-phy@0 { +> + etnphy0: ethernet-phy at 0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + interrupt-parent = <&gpio5>; @@ -568,7 +568,7 @@ schema: > + status = "okay"; > + }; > + -> + etnphy1: ethernet-phy@1 { +> + etnphy1: ethernet-phy at 1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + status = "okay"; @@ -599,7 +599,7 @@ schema: > + clock-frequency = <400000>; > + status = "okay"; > + -> + sgtl5000: sgtl5000@0a { +> + sgtl5000: sgtl5000 at 0a { > + #sound-dai-cells = <0>; > + compatible = "fsl,sgtl5000"; > + reg = <0x0a>; @@ -608,7 +608,7 @@ schema: > + clocks = <&mclk>; > + }; > + -> + polytouch: edt-ft5x06@38 { +> + polytouch: edt-ft5x06 at 38 { > + compatible = "edt,edt-ft5x06"; > + reg = <0x38>; > + pinctrl-names = "default"; @@ -625,7 +625,7 @@ details. > + }; > + -> + touchscreen: tsc2007@48 { +> + touchscreen: tsc2007 at 48 { > + compatible = "ti,tsc2007"; > + reg = <0x48>; > + pinctrl-names = "default"; @@ -1017,7 +1017,7 @@ Shawn > + display = <&display>; > + status = "okay"; > + -> + display: display@di0 { +> + display: display at di0 { > + bits-per-pixel = <32>; > + bus-width = <24>; > + status = "okay"; diff --git a/a/content_digest b/N1/content_digest index 3b637f9..3d37f88 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,30 +1,13 @@ "ref\01452619291-13625-1-git-send-email-LW@KARO-electronics.de\0" "ref\01453284549-16363-1-git-send-email-LW@KARO-electronics.de\0" "ref\01453284549-16363-17-git-send-email-LW@KARO-electronics.de\0" - "From\0Shawn Guo <shawnguo@kernel.org>\0" - "Subject\0Re: [PATCHv2 16/16] ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules\0" + "From\0shawnguo@kernel.org (Shawn Guo)\0" + "Subject\0[PATCHv2 16/16] ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules\0" "Date\0Sun, 28 Feb 2016 14:43:26 +0800\0" - "To\0Lothar Wa\303\237mann <LW@karo-electronics.de>\0" - "Cc\0Anson Huang <b20788@freescale.com>" - Bai Ping <b51503@freescale.com> - Frank Li <Frank.Li@freescale.com> - Fugang Duan <B38611@freescale.com> - Ian Campbell <ijc+devicetree@hellion.org.uk> - Kumar Gala <galak@codeaurora.org> - Mark Rutland <mark.rutland@arm.com> - Michael Turquette <mturquette@baylibre.com> - Pawel Moll <pawel.moll@arm.com> - Rob Herring <robh+dt@kernel.org> - Russell King <linux@arm.linux.org.uk> - Sascha Hauer <kernel@pengutronix.de> - Stephen Boyd <sboyd@codeaurora.org> - devicetree@vger.kernel.org - linux-arm-kernel@lists.infradead.org - linux-clk@vger.kernel.org - " linux-kernel@vger.kernel.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" - "On Wed, Jan 20, 2016 at 11:09:09AM +0100, Lothar Wa\303\237mann wrote:\n" + "On Wed, Jan 20, 2016 at 11:09:09AM +0100, Lothar Wa?mann wrote:\n" "> The TXUL-0010/-0011 modules are Computers On Module manufactured by\n" "> Ka-Ro electronics GmbH with the following characteristics:\n" "> Processor Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz\n" @@ -32,10 +15,10 @@ "> ROM 128MB NAND Flash (TXUL-0010) / 4GB eMMC (TXUL-0011)\n" "> Power supply Single 3.3 to 5V\n" "> Size 26mm SO-DIMM\n" - "> Temp. Range -40\302\260C to 85\302\260C\n" + "> Temp. Range -40?C to 85?C\n" "> \n" "> \n" - "> Signed-off-by: Lothar Wa\303\237mann <LW@KARO-electronics.de>\n" + "> Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>\n" "> ---\n" "> arch/arm/boot/dts/Makefile | 4 +-\n" "> arch/arm/boot/dts/imx6ul-txul-0010.dts | 54 ++\n" @@ -68,7 +51,7 @@ "> +++ b/arch/arm/boot/dts/imx6ul-txul-0010.dts\n" "> @@ -0,0 +1,54 @@\n" "> +/*\n" - "> + * Copyright 2015 Lothar Wa\303\237mann <LW@KARO-electronics.de>\n" + "> + * Copyright 2015 Lothar Wa?mann <LW@KARO-electronics.de>\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -131,7 +114,7 @@ "> +++ b/arch/arm/boot/dts/imx6ul-txul-0011.dts\n" "> @@ -0,0 +1,85 @@\n" "> +/*\n" - "> + * Copyright 2015 Lothar Wa\303\237mann <LW@KARO-electronics.de>\n" + "> + * Copyright 2015 Lothar Wa?mann <LW@KARO-electronics.de>\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -226,7 +209,7 @@ "> +++ b/arch/arm/boot/dts/imx6ul-txul.dtsi\n" "> @@ -0,0 +1,962 @@\n" "> +/*\n" - "> + * Copyright 2015 Lothar Wa\303\237mann <LW@KARO-electronics.de>\n" + "> + * Copyright 2015 Lothar Wa?mann <LW@KARO-electronics.de>\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -304,7 +287,7 @@ "\n" "Have a new line here.\n" "\n" - "> +\t\tmclk: clock@0 {\n" + "> +\t\tmclk: clock at 0 {\n" "> +\t\t\tcompatible = \"fixed-clock\";\n" "> +\t\t\treg = <0>;\n" "> +\t\t\t#clock-cells = <0>;\n" @@ -354,7 +337,7 @@ "> +\t\tclock-frequency = <400000>;\n" "> +\t\tstatus = \"okay\";\n" "> +\n" - "> +\t\tds1339: rtc@68 {\n" + "> +\t\tds1339: rtc at 68 {\n" "> +\t\t\tcompatible = \"dallas,ds1339\";\n" "> +\t\t\treg = <0x68>;\n" "> +\t\t\tstatus = \"disabled\";\n" @@ -385,7 +368,7 @@ "> +\t\t#address-cells = <1>;\n" "> +\t\t#size-cells = <0>;\n" "> +\n" - "> +\t\treg_3v3_etn: regulator@0 {\n" + "> +\t\treg_3v3_etn: regulator at 0 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <0>;\n" "> +\t\t\tregulator-name = \"3V3_ETN\";\n" @@ -397,7 +380,7 @@ "> +\t\t\tenable-active-high;\n" "> +\t\t};\n" "> +\n" - "> +\t\treg_2v5: regulator@1 {\n" + "> +\t\treg_2v5: regulator at 1 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tregulator-name = \"2V5\";\n" @@ -406,7 +389,7 @@ "> +\t\t\tregulator-always-on;\n" "> +\t\t};\n" "> +\n" - "> +\t\treg_3v3: regulator@2 {\n" + "> +\t\treg_3v3: regulator at 2 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <2>;\n" "> +\t\t\tregulator-name = \"3V3\";\n" @@ -415,7 +398,7 @@ "> +\t\t\tregulator-always-on;\n" "> +\t\t};\n" "> +\n" - "> +\t\treg_can_xcvr: regulator@3 {\n" + "> +\t\treg_can_xcvr: regulator at 3 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <3>;\n" "> +\t\t\tregulator-name = \"CAN XCVR\";\n" @@ -427,7 +410,7 @@ "> +\t\t\tenable-active-low;\n" "> +\t\t};\n" "> +\n" - "> +\t\treg_lcd_pwr: regulator@5 {\n" + "> +\t\treg_lcd_pwr: regulator at 5 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <5>;\n" "> +\t\t\tregulator-name = \"LCD POWER\";\n" @@ -441,7 +424,7 @@ "> +\t\t\tregulator-always-on;\n" "> +\t\t};\n" "> +\n" - "> +\t\treg_lcd_reset: regulator@6 {\n" + "> +\t\treg_lcd_reset: regulator at 6 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <6>;\n" "> +\t\t\tregulator-name = \"LCD RESET\";\n" @@ -455,7 +438,7 @@ "> +\t\t\tregulator-always-on;\n" "> +\t\t};\n" "> +\n" - "> +\t\treg_usbh1_vbus: regulator@7 {\n" + "> +\t\treg_usbh1_vbus: regulator at 7 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <7>;\n" "> +\t\t\tregulator-name = \"usbh1_vbus\";\n" @@ -467,7 +450,7 @@ "> +\t\t\tenable-active-high;\n" "> +\t\t};\n" "> +\n" - "> +\t\treg_usbotg_vbus: regulator@8 {\n" + "> +\t\treg_usbotg_vbus: regulator at 8 {\n" "> +\t\t\tcompatible = \"regulator-fixed\";\n" "> +\t\t\treg = <8>;\n" "> +\t\t\tregulator-name = \"usbotg_vbus\";\n" @@ -496,13 +479,13 @@ "> +\t\t>;\n" "> +\t\tstatus = \"disabled\";\n" "> +\n" - "> +\t\tspi@0 {\n" + "> +\t\tspi at 0 {\n" "> +\t\t\tcompatible = \"spidev\";\n" "> +\t\t\treg = <0>;\n" "> +\t\t\tspi-max-frequency = <660000>;\n" "> +\t\t};\n" "> +\n" - "> +\t\tspi@1 {\n" + "> +\t\tspi at 1 {\n" "> +\t\t\tcompatible = \"spidev\";\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tspi-max-frequency = <660000>;\n" @@ -560,13 +543,13 @@ "> +\t>;\n" "> +\tstatus = \"disabled\";\n" "> +\n" - "> +\tspi@0 {\n" + "> +\tspi at 0 {\n" "> +\t\tcompatible = \"spidev\";\n" "> +\t\treg = <0>;\n" "> +\t\tspi-max-frequency = <60000000>;\n" "> +\t};\n" "> +\n" - "> +\tspi@1 {\n" + "> +\tspi at 1 {\n" "> +\t\tcompatible = \"spidev\";\n" "> +\t\treg = <1>;\n" "> +\t\tspi-max-frequency = <60000000>;\n" @@ -586,7 +569,7 @@ "> +\t\t#address-cells = <1>;\n" "> +\t\t#size-cells = <0>;\n" "> +\n" - "> +\t\tetnphy0: ethernet-phy@0 {\n" + "> +\t\tetnphy0: ethernet-phy at 0 {\n" "> +\t\t\tcompatible = \"ethernet-phy-ieee802.3-c22\";\n" "> +\t\t\treg = <0>;\n" "> +\t\t\tinterrupt-parent = <&gpio5>;\n" @@ -594,7 +577,7 @@ "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tetnphy1: ethernet-phy@1 {\n" + "> +\t\tetnphy1: ethernet-phy at 1 {\n" "> +\t\t\tcompatible = \"ethernet-phy-ieee802.3-c22\";\n" "> +\t\t\treg = <1>;\n" "> +\t\t\tstatus = \"okay\";\n" @@ -625,7 +608,7 @@ "> +\tclock-frequency = <400000>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tsgtl5000: sgtl5000@0a {\n" + "> +\tsgtl5000: sgtl5000 at 0a {\n" "> +\t\t#sound-dai-cells = <0>;\n" "> +\t\tcompatible = \"fsl,sgtl5000\";\n" "> +\t\treg = <0x0a>;\n" @@ -634,7 +617,7 @@ "> +\t\tclocks = <&mclk>;\n" "> +\t};\n" "> +\n" - "> +\tpolytouch: edt-ft5x06@38 {\n" + "> +\tpolytouch: edt-ft5x06 at 38 {\n" "> +\t\tcompatible = \"edt,edt-ft5x06\";\n" "> +\t\treg = <0x38>;\n" "> +\t\tpinctrl-names = \"default\";\n" @@ -651,7 +634,7 @@ "\n" "> +\t};\n" "> +\n" - "> +\ttouchscreen: tsc2007@48 {\n" + "> +\ttouchscreen: tsc2007 at 48 {\n" "> +\t\tcompatible = \"ti,tsc2007\";\n" "> +\t\treg = <0x48>;\n" "> +\t\tpinctrl-names = \"default\";\n" @@ -1043,7 +1026,7 @@ "> +\tdisplay = <&display>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tdisplay: display@di0 {\n" + "> +\tdisplay: display at di0 {\n" "> +\t\tbits-per-pixel = <32>;\n" "> +\t\tbus-width = <24>;\n" "> +\t\tstatus = \"okay\";\n" @@ -1224,4 +1207,4 @@ "> \n" > -089ee726830dd71eadb4596aa3a5b9a723b9f336a7e196bb83460f6a77319388 +240162f3445a59920be243bae5e2ce9467ce4321f0f7cdf05956bcaf129c427e
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.