From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: intel-gfx@lists.freedesktop.org, paulo.r.zanoni@intel.com
Subject: Re: [PATCH i-g-t v2] tests: Adding kms_dp_aux_dev test.
Date: Wed, 2 Mar 2016 13:23:55 +0200 [thread overview]
Message-ID: <20160302112355.GR15993@intel.com> (raw)
In-Reply-To: <1456872864-26599-1-git-send-email-rafael.antognolli@intel.com>
On Tue, Mar 01, 2016 at 02:54:24PM -0800, Rafael Antognolli wrote:
> This new test makes some basic testing on the proposed drm_dp_aux_dev
> interface. If the feature is enabled and the drm_dp_aux_dev class is
> present, it will check for available DP aux channels and test them for:
> - basic seek to 0 and read 1 byte
> - seek to the last address and read, to confirm 0 is returned
> - seek one more byte and confirm that EINVAL is returned
> - try to read 64 bytes when at 8 bytes from the end of the
> address space
> - try to read 64 bytes at the address 0.
>
> So far, no write checks are done.
>
> v2:
> - compare DP version, max link rate and max lane count
> - check seek position after reading
> - merge all subtests into a single one.
>
> Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
lgtm
> ---
> tests/Makefile.sources | 1 +
> tests/kms_dp_aux_dev.c | 190 +++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 191 insertions(+)
> create mode 100644 tests/kms_dp_aux_dev.c
>
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index f8b18b0..7920e23 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -79,6 +79,7 @@ TESTS_progs_M = \
> kms_atomic \
> kms_chv_cursor_fail \
> kms_cursor_crc \
> + kms_dp_aux_dev \
> kms_draw_crc \
> kms_fbc_crc \
> kms_fbcon_fbt \
> diff --git a/tests/kms_dp_aux_dev.c b/tests/kms_dp_aux_dev.c
> new file mode 100644
> index 0000000..088d980
> --- /dev/null
> +++ b/tests/kms_dp_aux_dev.c
> @@ -0,0 +1,190 @@
> +/*
> + * Copyright © 2016 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + */
> +
> +/** @file kms_dp_aux_dev.c
> + *
> + * This is a test of functionality of drm_dp_aux_dev.
> + */
> +
> +#include "igt.h"
> +#include <stdlib.h>
> +#include <stdio.h>
> +#include <dirent.h>
> +#include <unistd.h>
> +#include <sys/stat.h>
> +#include <fcntl.h>
> +
> +#include <drm.h>
> +
> +#define MAX_CONNECTORS 32
> +#define DRM_DP_AUX_SYSFS_PATH "/sys/class/drm_dp_aux_dev"
> +
> +IGT_TEST_DESCRIPTION("Test of drm_aux_dev nodes.");
> +
> +static void basic_seek_and_read(int fd)
> +{
> + off_t address;
> + uint8_t buf;
> + uint8_t bigbuf[64];
> + ssize_t res;
> +
> + /* Basic seek and read */
> + address = lseek(fd, 0x0, SEEK_SET);
> + igt_assert_eq(address, 0x0);
> +
> + res = read(fd, &buf, sizeof(buf)); /* read DP version */
> + igt_assert_eq(res, sizeof(buf));
> +
> + address = lseek(fd, 0, SEEK_CUR);
> + igt_assert_eq(address, 0x1);
> +
> + igt_assert((buf == 0x10) || (buf == 0x11) || (buf == 0x12));
> +
> + res = read(fd, &buf, sizeof(buf)); /* read max link rate */
> + igt_assert_eq(res, sizeof(buf));
> +
> + address = lseek(fd, 0, SEEK_CUR);
> + igt_assert_eq(address, 0x2);
> +
> + igt_assert((buf == 0x06) || (buf == 0x0a) || (buf == 0x14));
> +
> + res = read(fd, &buf, sizeof(buf)); /* read max max lane count */
> + igt_assert_eq(res, sizeof(buf));
> +
> + address = lseek(fd, 0, SEEK_CUR);
> + igt_assert_eq(address, 0x3);
> +
> + buf &= 0xf;
> + igt_assert((buf == 0x1) || (buf == 0x2) || (buf == 0x4));
> +
> + /* Test reads on the end of address space */
> + address = lseek(fd, 0, SEEK_END);
> + igt_assert_eq(address, 1 << 20);
> + res = read(fd, &buf, sizeof(buf));
> + igt_assert_eq(res, 0);
> +
> + address = lseek(fd, 0, SEEK_CUR);
> + igt_assert_eq(address, 1 << 20);
> +
> + address = lseek(fd, 1, SEEK_CUR);
> + igt_assert_eq(address, -1);
> + igt_assert_eq(errno, EINVAL);
> +
> + address = lseek(fd, -8, SEEK_END);
> + res = read(fd, bigbuf, sizeof(bigbuf));
> + igt_assert_eq(res, 8);
> +
> + address = lseek(fd, 0, SEEK_CUR);
> + igt_assert_eq(address, 1 << 20);
> +
> + /* Test reading more than 16 bytes at once */
> + lseek(fd, 0, SEEK_SET);
> + res = read(fd, bigbuf, sizeof(bigbuf));
> + igt_assert_eq(res, sizeof(bigbuf));
> +
> + address = lseek(fd, 0, SEEK_CUR);
> + igt_assert_eq(address, 64);
> +}
> +
> +static int count = 0;
> +static int fds[MAX_CONNECTORS];
> +static bool checked_connections = false;
> +static bool connected[MAX_CONNECTORS];
> +
> +static bool check_aux_connected(int fd)
> +{
> + char buf;
> + ssize_t res;
> +
> + res = read(fd, &buf, sizeof(buf));
> + igt_assert(res >= 0 || errno == ETIMEDOUT);
> + if (res < 0 && errno == ETIMEDOUT)
> + return false;
> + else
> + return true;
> +}
> +
> +static void for_each_dp_aux(void (*fn)(int))
> +{
> + int i;
> + int total = 0;
> +
> + for (i = 0; i < count; i++) {
> + igt_assert_fd(fds[i]);
> +
> + /* The first time that this loop is executed, check if each aux
> + * dp is connected and store that result for the next pass
> + */
> + if (!checked_connections)
> + connected[i] = check_aux_connected(fds[i]);
> +
> + if (connected[i]) {
> + fn(fds[i]);
> + total++;
> + }
> + }
> +
> + checked_connections = true;
> +
> + igt_require(total > 0);
> +}
> +
> +igt_main
> +{
> + struct stat st;
> + DIR *dir = NULL;
> +
> + igt_fixture {
> + struct dirent *dirent;
> + const char basedir[] = "/dev/";
> + size_t len_base = sizeof(basedir);
> +
> + igt_require(stat(DRM_DP_AUX_SYSFS_PATH, &st) == 0);
> + igt_require(S_ISDIR(st.st_mode));
> +
> + dir = opendir(DRM_DP_AUX_SYSFS_PATH);
> + igt_require(dir);
> +
> + /* store each dp aux dev for later use */
> + while ((dirent = readdir(dir))) {
> + char entry[len_base + NAME_MAX];
> + if (dirent->d_name[0] == '.')
> + continue;
> +
> + snprintf(entry, sizeof(entry), "%s%s", basedir, dirent->d_name);
> + fds[count] = open(entry, O_RDONLY);
> + count++;
> + }
> + igt_require(count > 0);
> + }
> +
> + igt_subtest("basic_seek_and_read")
> + for_each_dp_aux(basic_seek_and_read);
> +
> + igt_fixture {
> + int i;
> + for (i = 0; i < count; i++)
> + close(fds[i]);
> + closedir(dir);
> + }
> +}
> --
> 2.5.0
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2016-03-02 11:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-01 22:54 [PATCH i-g-t v2] tests: Adding kms_dp_aux_dev test Rafael Antognolli
2016-03-02 11:23 ` Ville Syrjälä [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160302112355.GR15993@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
--cc=rafael.antognolli@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.