From: dannenberg@ti.com (Andreas Dannenberg)
To: linux-arm-kernel@lists.infradead.org
Subject: [v8,2/4] arm: add implementation for arm-smccc
Date: Wed, 2 Mar 2016 15:26:28 -0600 [thread overview]
Message-ID: <20160302212628.GA12740@borg.dal.design.ti.com> (raw)
In-Reply-To: <1451912079-29258-3-git-send-email-jens.wiklander@linaro.org>
On Mon, Jan 04, 2016 at 01:54:37PM +0100, Jens Wiklander wrote:
> Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC for
> architectures that may support arm-smccc. It's the responsibility of the
> caller to know if the SMC instruction is supported by the platform.
>
> Reviewed-by: Lars Persson <lars.persson@axis.com>
> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
>
> ---
> arch/arm/Kconfig | 1 +
> arch/arm/kernel/Makefile | 2 ++
> arch/arm/kernel/armksyms.c | 6 +++++
> arch/arm/kernel/smccc-call.S | 62 ++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 71 insertions(+)
> create mode 100644 arch/arm/kernel/smccc-call.S
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 34e1569..36b9490 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -37,6 +37,7 @@ config ARM
> select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32
> select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
> select HAVE_ARCH_TRACEHOOK
> + select HAVE_ARM_SMCCC if CPU_V7
> select HAVE_BPF_JIT
> select HAVE_CC_STACKPROTECTOR
> select HAVE_CONTEXT_TRACKING
> diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
> index af9e59b..d2d0042 100644
> --- a/arch/arm/kernel/Makefile
> +++ b/arch/arm/kernel/Makefile
> @@ -92,4 +92,6 @@ obj-y += psci-call.o
> obj-$(CONFIG_SMP) += psci_smp.o
> endif
>
> +obj-$(CONFIG_HAVE_ARM_SMCCC) += smccc-call.o
> +
> extra-y := $(head-y) vmlinux.lds
> diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
> index f89811f..7e45f69 100644
> --- a/arch/arm/kernel/armksyms.c
> +++ b/arch/arm/kernel/armksyms.c
> @@ -16,6 +16,7 @@
> #include <linux/syscalls.h>
> #include <linux/uaccess.h>
> #include <linux/io.h>
> +#include <linux/arm-smccc.h>
>
> #include <asm/checksum.h>
> #include <asm/ftrace.h>
> @@ -175,3 +176,8 @@ EXPORT_SYMBOL(__gnu_mcount_nc);
> EXPORT_SYMBOL(__pv_phys_pfn_offset);
> EXPORT_SYMBOL(__pv_offset);
> #endif
> +
> +#ifdef CONFIG_HAVE_ARM_SMCCC
> +EXPORT_SYMBOL(arm_smccc_smc);
> +EXPORT_SYMBOL(arm_smccc_hvc);
> +#endif
> diff --git a/arch/arm/kernel/smccc-call.S b/arch/arm/kernel/smccc-call.S
> new file mode 100644
> index 0000000..2e48b67
> --- /dev/null
> +++ b/arch/arm/kernel/smccc-call.S
> @@ -0,0 +1,62 @@
> +/*
> + * Copyright (c) 2015, Linaro Limited
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <linux/linkage.h>
> +
> +#include <asm/opcodes-sec.h>
> +#include <asm/opcodes-virt.h>
> +#include <asm/unwind.h>
> +
> + /*
> + * Wrap c macros in asm macros to delay expansion until after the
> + * SMCCC asm macro is expanded.
> + */
> + .macro SMCCC_SMC
> + __SMC(0)
> + .endm
> +
> + .macro SMCCC_HVC
> + __HVC(0)
> + .endm
> +
> + .macro SMCCC instr
> +UNWIND( .fnstart)
> + mov r12, sp
> + push {r4-r7}
> +UNWIND( .save {r4-r7})
> + ldm r12, {r4-r7}
> + \instr
Jens,
out of curiosity, we don't need any dsb/dmb calls here? I've rummaged
through some other code here at TI and see such barriers being included
right before the smc call. However in all fairness I also don't see such
memory calls included in arch/arm/kernel/psci-call.S that your other
patch is removing, so either they are really not needed or I didn't look
right and need to go to have my prescriptions checked.
Regards,
--
Andreas Dannenberg
Texas Instruments Inc
> + pop {r4-r7}
> + ldr r12, [sp, #(4 * 4)]
> + stm r12, {r0-r3}
> + bx lr
> +UNWIND( .fnend)
> + .endm
> +
> +/*
> + * void smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
> + * unsigned long a3, unsigned long a4, unsigned long a5,
> + * unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
> + */
> +ENTRY(arm_smccc_smc)
> + SMCCC SMCCC_SMC
> +ENDPROC(arm_smccc_smc)
> +
> +/*
> + * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
> + * unsigned long a3, unsigned long a4, unsigned long a5,
> + * unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
> + */
> +ENTRY(arm_smccc_hvc)
> + SMCCC SMCCC_HVC
> +ENDPROC(arm_smccc_hvc)
next prev parent reply other threads:[~2016-03-02 21:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 12:54 [PATCH v8 0/4] ARM SMC Calling Convention interface Jens Wiklander
2016-01-04 12:54 ` [PATCH v8 1/4] arm/arm64: add arm-smccc Jens Wiklander
2016-01-04 15:59 ` Lorenzo Pieralisi
2016-01-04 12:54 ` [PATCH v8 2/4] arm: add implementation for arm-smccc Jens Wiklander
2016-03-02 21:26 ` Andreas Dannenberg [this message]
2016-03-02 21:38 ` [v8,2/4] " Will Deacon
2016-01-04 12:54 ` [PATCH v8 3/4] arm64: " Jens Wiklander
2016-01-04 12:54 ` [PATCH v8 4/4] drivers: psci: replace psci firmware calls Jens Wiklander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160302212628.GA12740@borg.dal.design.ti.com \
--to=dannenberg@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.