[PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.

[vinod.koul@intel.com (Vinod Koul)]

On Mon, Feb 29, 2016 at 06:10:53PM +0100, Martin Sperl wrote:
> 
> > On 14.01.2016, at 05:07, Vinod Koul <vinod.koul@intel.com> wrote:
> > 
> > On Wed, Jan 13, 2016 at 03:24:59PM +0100, Martin Sperl wrote:
> >>>> But that would be frowned upon, so I had to come up with the approach
> >>>> taken, which makes the following assumptions:
> >>> 
> >>> DT was designed to move this info and hardcoding from kernel into
> >>> DT, so why cant we do that?
> >> We still need to be backwards-compatible - at least that is what
> >> everyone tells me, so I need to hard-code fallbacks for those values.
> > 
> > IMO hard code for falling back is okay as that supports old cases and new
> > platforms use geric DT info and new devices can be supported generically,
> > please check with DT folks..
> > 
> >>>> * the DT maps only the interrupts that are assigned to the HW block
> >>>> * the driver knows about the number of DMA channels in HW
> >> that could be a DT property, yes.
> >>>> * the driver knows about the mapping of shared interrupts
> >>>>  (11-14 share irq).
> >> OK - how would you define that "mapping" in a "sane" manner in the DT
> >> that allows us to have multiple such mappings in the future?
> > 
> > You are hard coding the flags for each channel, we can pass this for each
> > channel in the interrupt configi, a flag share/none..? Please run this thru
> > DT experts and I am not one of them..
> 
> So here a ?simple? approach with the following device tree addition (plus defaults):
> 	interrupts = <1 16>, /* dma 0 irq */
> 		     <1 17>, /* dma 1 irq */
> 	...
> 		     <1 26>, /* dma 10 irq */
> 		     <1 27>, /* dma 11-14 irq */
> 		     <1 28>; /* dma all irq */
> 	brcm,dma-channel-mask = <0x7f35>;
> 	/* new properties below - also the defaults */
> 	brcm,dma-channel-shared-mask = <0x7800>;
> 	brcm,dma-shared-irq-index = <11>;
> 
> Is this sufficient to move forward?

This looks okay to me for now, though am not a DT expert. Please send
patches and CC DT folks as relevant and we can discuss..

-- 
~Vinod