From: Dave Jones <davej@codemonkey.org.uk>
To: Linux Kernel <linux-kernel@vger.kernel.org>,
Chris Mason <clm@fb.com>, Josef Bacik <jbacik@fb.com>,
David Sterba <dsterba@suse.com>,
linux-btrfs@vger.kernel.org
Subject: Re: btrfs_destroy_inode WARN_ON.
Date: Fri, 1 Apr 2016 14:12:27 -0400 [thread overview]
Message-ID: <20160401181227.GA31426@codemonkey.org.uk> (raw)
In-Reply-To: <20160328011400.GA19000@codemonkey.org.uk>
On Sun, Mar 27, 2016 at 09:14:00PM -0400, Dave Jones wrote:
> > WARNING: CPU: 2 PID: 32570 at fs/btrfs/inode.c:9261 btrfs_destroy_inode+0x389/0x3f0 [btrfs]
> > CPU: 2 PID: 32570 Comm: rm Not tainted 4.5.0-think+ #14
> > ffffffffc039baf9 00000000ef721ef0 ffff88025966fc08 ffffffff8957bcdb
> > 0000000000000000 0000000000000000 ffff88025966fc50 ffffffff890b41f1
> > ffff88045d918040 0000242d4eed6048 ffff88024eed6048 ffff88024eed6048
> > Call Trace:
> > [<ffffffffc039baf9>] ? btrfs_destroy_inode+0x389/0x3f0 [btrfs]
> > [<ffffffff8957bcdb>] dump_stack+0x68/0x9d
> > [<ffffffff890b41f1>] __warn+0x111/0x130
> > [<ffffffff890b43fd>] warn_slowpath_null+0x1d/0x20
> > [<ffffffffc039baf9>] btrfs_destroy_inode+0x389/0x3f0 [btrfs]
> > [<ffffffff89352307>] destroy_inode+0x67/0x90
> > [<ffffffff893524e7>] evict+0x1b7/0x240
> > [<ffffffff893529be>] iput+0x3ae/0x4e0
> > [<ffffffff8934c93e>] ? dput+0x20e/0x460
> > [<ffffffff8933ee26>] do_unlinkat+0x256/0x440
> > [<ffffffff8933ebd0>] ? do_rmdir+0x350/0x350
> > [<ffffffff890031e7>] ? syscall_trace_enter_phase1+0x87/0x260
> > [<ffffffff89003160>] ? enter_from_user_mode+0x50/0x50
> > [<ffffffff8913c3b5>] ? __lock_is_held+0x25/0xd0
> > [<ffffffff891411f2>] ? mark_held_locks+0x22/0xc0
> > [<ffffffff890034ed>] ? syscall_trace_enter_phase2+0x12d/0x3d0
> > [<ffffffff893400b0>] ? SyS_rmdir+0x20/0x20
> > [<ffffffff893400cb>] SyS_unlinkat+0x1b/0x30
> > [<ffffffff89003ac4>] do_syscall_64+0xf4/0x240
> > [<ffffffff89d520da>] entry_SYSCALL64_slow_path+0x25/0x25
> > ---[ end trace a48ce4e6a1b5e409 ]---
> >
> > That's WARN_ON(BTRFS_I(inode)->csum_bytes);
> >
> > *maybe* it's a bad disk, but there's no indication in dmesg of anything awry.
> > Spinning rust on SATA, nothing special.
>
> Same WARN_ON is reachable from umount too..
>
> WARNING: CPU: 2 PID: 20092 at fs/btrfs/inode.c:9261 btrfs_destroy_inode+0x40c/0x480 [btrfs]
> CPU: 2 PID: 20092 Comm: umount Tainted: G W 4.5.0-think+ #1
> 00000000ffffffff 00000000a32c482b ffff8803cd187b60 ffffffff9d63af84
> 0000000000000000 0000000000000000 ffffffffc05c5e40 ffffffffc04d316c
> ffff8803cd187ba8 ffffffff9d0c4c27 ffff880460d80040 0000242dcd187bb0
> Call Trace:
> [<ffffffff9d63af84>] dump_stack+0x95/0xe1
> [<ffffffffc04d316c>] ? btrfs_destroy_inode+0x40c/0x480 [btrfs]
> [<ffffffff9d0c4c27>] __warn+0x147/0x170
> [<ffffffff9d0c4e91>] warn_slowpath_null+0x31/0x40
> [<ffffffffc04d316c>] btrfs_destroy_inode+0x40c/0x480 [btrfs]
> [<ffffffffc04d2d60>] ? btrfs_test_destroy_inode+0x40/0x40 [btrfs]
> [<ffffffff9d3bf7e7>] destroy_inode+0x77/0xb0
> [<ffffffff9d3bfa2e>] evict+0x20e/0x2c0
> [<ffffffff9d3bfb50>] dispose_list+0x70/0xb0
> [<ffffffff9d3c14ef>] evict_inodes+0x26f/0x2c0
> [<ffffffff9d3c1280>] ? inode_add_lru+0x60/0x60
> [<ffffffff9d40baa5>] ? fsnotify_unmount_inodes+0x215/0x2c0
> [<ffffffff9d38e336>] generic_shutdown_super+0x76/0x1c0
> [<ffffffff9d38e899>] kill_anon_super+0x29/0x40
> [<ffffffffc044c421>] btrfs_kill_super+0x31/0x130 [btrfs]
> [<ffffffff9d38ec1f>] deactivate_locked_super+0x6f/0xb0
> [<ffffffff9d38f2c9>] deactivate_super+0x99/0xb0
> [<ffffffff9d3c8610>] cleanup_mnt+0x70/0xd0
> [<ffffffff9d3c86db>] __cleanup_mnt+0x1b/0x20
> [<ffffffff9d103d1f>] task_work_run+0xef/0x130
> [<ffffffff9d0023c9>] exit_to_usermode_loop+0xf9/0x100
> [<ffffffff9d004068>] do_syscall_64+0x238/0x2b0
> [<ffffffff9df3831a>] entry_SYSCALL64_slow_path+0x25/0x25
Additional fallout:
BTRFS: assertion failed: num_extents, file: fs/btrfs/extent-tree.c, line: 5584
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:4320!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN
CPU: 1 PID: 18815 Comm: trinity-c13 Tainted: G W 4.6.0-rc1-think+ #1
task: ffff88045de10040 ti: ffff8803afa38000 task.ti: ffff8803afa38000
RIP: 0010:[<ffffffffc045caf3>] [<ffffffffc045caf3>] assfail.constprop.88+0x2b/0x2d [btrfs]
RSP: 0018:ffff8803afa3f838 EFLAGS: 00010282
RAX: 000000000000004e RBX: ffffffffc046e200 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffed0075f47efb
RBP: ffff8803afa3f848 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: 00000000000015d0
R13: ffff8803fda0e048 R14: ffff8803fda0dc38 R15: ffff8803fda0dc58
FS: 00007fa0566d6700(0000) GS:ffff880468a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0566d9000 CR3: 0000000333bc4000 CR4: 00000000001406e0
DR0: 00007fa0554fb000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Stack:
0000000000000000 ffff8803fda0e048 ffff8803afa3f880 ffffffffc032288b
0000000000000000 ffff880460bb33f8 ffff8803fda0e048 ffff8803fda0dc38
ffff8803fda0dc58 ffff8803afa3f8c8 ffffffffc032f851 0000000000000001
Call Trace:
[<ffffffffc032288b>] drop_outstanding_extent+0x10b/0x130 [btrfs]
[<ffffffffc032f851>] btrfs_delalloc_release_metadata+0x71/0x480 [btrfs]
[<ffffffffc03879bf>] ? __btrfs_buffered_write+0xa6f/0xb50 [btrfs]
[<ffffffffc032fc87>] btrfs_delalloc_release_space+0x27/0x50 [btrfs]
[<ffffffffc0387978>] __btrfs_buffered_write+0xa28/0xb50 [btrfs]
[<ffffffffc0386f50>] ? btrfs_dirty_pages+0x1c0/0x1c0 [btrfs]
[<ffffffff982bb6fe>] ? filemap_fdatawait_range+0x3e/0x50
[<ffffffff982c16a7>] ? generic_file_direct_write+0x237/0x2f0
[<ffffffff982c1470>] ? filemap_write_and_wait_range+0xa0/0xa0
[<ffffffffc038dc00>] ? btrfs_file_write_iter+0x670/0x9a0 [btrfs]
[<ffffffffc038dcdd>] btrfs_file_write_iter+0x74d/0x9a0 [btrfs]
[<ffffffff983886e3>] do_iter_readv_writev+0x153/0x1f0
[<ffffffffc038d590>] ? btrfs_sync_file+0x920/0x920 [btrfs]
[<ffffffff98388590>] ? vfs_iter_read+0x1e0/0x1e0
[<ffffffff98112179>] ? preempt_count_sub+0xb9/0x130
[<ffffffff98154577>] ? percpu_down_read+0x57/0xa0
[<ffffffff9838f94e>] ? __sb_start_write+0xee/0x130
[<ffffffffc038d590>] ? btrfs_sync_file+0x920/0x920 [btrfs]
[<ffffffff9838a09f>] do_readv_writev+0x30f/0x460
[<ffffffff98389d90>] ? vfs_write+0x2b0/0x2b0
[<ffffffff9815be00>] ? debug_check_no_locks_freed+0x1b0/0x1b0
[<ffffffff98256a5d>] ? trace_preempt_off+0x3d/0x1c0
[<ffffffff9815ed67>] ? lock_release+0x547/0x8f0
[<ffffffff98674c7b>] ? check_preemption_disabled+0x3b/0x160
[<ffffffff982568bd>] ? trace_preempt_on+0x3d/0x1a0
[<ffffffff98112179>] ? preempt_count_sub+0xb9/0x130
[<ffffffff982b886b>] ? __context_tracking_exit.part.5+0x9b/0x2b0
[<ffffffff9800347c>] ? syscall_trace_enter_phase1+0xbc/0x2a0
[<ffffffff9838a638>] vfs_writev+0x78/0xa0
[<ffffffff9838a967>] do_pwritev+0x117/0x140
[<ffffffff9838c9f0>] ? SyS_preadv2+0x80/0x80
[<ffffffff9838ca25>] SyS_pwritev+0x35/0x40
[<ffffffff98003f33>] do_syscall_64+0x103/0x2b0
[<ffffffff98f3881a>] entry_SYSCALL64_slow_path+0x25/0x25
Code: 55 48 89 e5 41 54 41 89 f4 53 48 89 fb e8 e6 95 da d7 44 89 e1 48 89 de 48 c7 c2 60 de 46 c0 48 c7 c7 a0 e1 46 c0 e8 fc d5 e5 d7 <0f> 0b 55 48 89 e5 41 57 45 89 c7 41 56 49 89 ce 41 55 49 89 d5
RIP [<ffffffffc045caf3>] assfail.constprop.88+0x2b/0x2d [btrfs]
RSP <ffff8803afa3f838>
---[ end trace 40e67d85fcda7cb2 ]---
BUG: workqueue lockup - pool cpus=1 node=0 flags=0x0 nice=0 stuck for 30s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 6: cpus=3 node=0 flags=0x0 nice=0 active=1/256
pending: vmstat_shepherd
pwq 4: cpus=2 node=0 flags=0x0 nice=0 active=1/256
pending: check_corruption
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=3/256
pending: usb_serial_port_work, lru_add_drain_per_cpu BAR(17230), e1000_watchdog_task
workqueue events_power_efficient: flags=0x82
pwq 8: cpus=0-3 flags=0x4 nice=0 active=3/256
pending: fb_flashcursor, neigh_periodic_work, neigh_periodic_work
workqueue events_freezable_power_: flags=0x86
pwq 8: cpus=0-3 flags=0x4 nice=0 active=1/256
pending: disk_events_workfn
workqueue netns: flags=0x6000a
pwq 8: cpus=0-3 flags=0x4 nice=0 active=1/1
in-flight: 10038:cleanup_net
workqueue writeback: flags=0x4e
pwq 8: cpus=0-3 flags=0x4 nice=0 active=2/256
pending: wb_workfn, wb_workfn
workqueue kblockd: flags=0x18
pwq 3: cpus=1 node=0 flags=0x0 nice=-20 active=2/256
pending: blk_mq_timeout_work, blk_mq_timeout_work
workqueue vmstat: flags=0xc
pwq 4: cpus=2 node=0 flags=0x0 nice=0 active=1/256
pending: vmstat_update
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/256
pending: vmstat_update
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256
pending: vmstat_update
pool 8: cpus=0-3 flags=0x4 nice=0 hung=0s workers=11 idle: 11638 10276 609 17937 606 9237 605 891 15998 14100
note: trinity-c13[18815] exited with preempt_count 1
next prev parent reply other threads:[~2016-04-01 18:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-24 22:54 btrfs_destroy_inode WARN_ON Dave Jones
2016-03-25 8:25 ` Markus Trippelsdorf
2016-03-28 14:05 ` Josef Bacik
2016-03-28 14:14 ` Markus Trippelsdorf
2016-04-26 1:40 ` Adam Borowski
2016-03-28 1:14 ` Dave Jones
2016-04-01 18:12 ` Dave Jones [this message]
2016-04-01 18:18 ` Dave Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160401181227.GA31426@codemonkey.org.uk \
--to=davej@codemonkey.org.uk \
--cc=clm@fb.com \
--cc=dsterba@suse.com \
--cc=jbacik@fb.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.