From: Simon Horman <horms@verge.net.au>
To: Alban Bedel <alban.bedel@avionic-design.de>
Cc: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>,
kexec@lists.infradead.org
Subject: Re: [PATCH 1/3] arm: properly handle a missing /chosen node in the DT
Date: Tue, 5 Apr 2016 15:33:06 +0900 [thread overview]
Message-ID: <20160405063306.GA19694@verge.net.au> (raw)
In-Reply-To: <1459438260-8205-1-git-send-email-alban.bedel@avionic-design.de>
On Thu, Mar 31, 2016 at 05:30:58PM +0200, Alban Bedel wrote:
> From: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>
>
> When adding a new node to the DT in the setup_dtb_prop function, the
> parent offset need be passed to fdt_add_subnode. Currently a bogus
> error code is used. Fix that by adding the parent offset as an extra
> function argument to setup_dtb_prop, and change the handling of the
> /chosen node to operate on a relative path plus (zero) offset instead of
> an absolute path.
>
> Signed-off-by: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>
Hi,
I am struggling to see the problem that this patch tries to solve.
* Where and when is a bogus error code used?
* Why is a new parameter added to fdt_add_subnode and always passed as zero?
* If it is inappropriate to pass off to fdt_add_subnode() can
that be resolved by simply passing 0 instead?
> ---
> kexec/arch/arm/kexec-zImage-arm.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/kexec/arch/arm/kexec-zImage-arm.c b/kexec/arch/arm/kexec-zImage-arm.c
> index d85ab9b..78518fd 100644
> --- a/kexec/arch/arm/kexec-zImage-arm.c
> +++ b/kexec/arch/arm/kexec-zImage-arm.c
> @@ -257,8 +257,9 @@ int atag_arm_load(struct kexec_info *info, unsigned long base,
> return 0;
> }
>
> -static int setup_dtb_prop(char **bufp, off_t *sizep, const char *node_name,
> - const char *prop_name, const void *val, int len)
> +static int setup_dtb_prop(char **bufp, off_t *sizep, int parentoffset,
> + const char *node_name, const char *prop_name,
> + const void *val, int len)
> {
> char *dtb_buf;
> off_t dtb_size;
> @@ -273,14 +274,14 @@ static int setup_dtb_prop(char **bufp, off_t *sizep, const char *node_name,
> dtb_size = *sizep;
>
> /* check if the subnode has already exist */
> - off = fdt_path_offset(dtb_buf, node_name);
> + off = fdt_subnode_offset(dtb_buf, parentoffset, node_name);
> if (off == -FDT_ERR_NOTFOUND) {
> dtb_size += fdt_node_len(node_name);
> fdt_set_totalsize(dtb_buf, dtb_size);
> dtb_buf = xrealloc(dtb_buf, dtb_size);
> if (dtb_buf == NULL)
> die("xrealloc failed\n");
> - off = fdt_add_subnode(dtb_buf, off, node_name);
> + off = fdt_add_subnode(dtb_buf, parentoffset, node_name);
> }
>
> if (off < 0) {
> @@ -496,7 +497,7 @@ int zImage_arm_load(int argc, char **argv, const char *buf, off_t len,
> * Error should have been reported so
> * directly return -1
> */
> - if (setup_dtb_prop(&dtb_buf, &dtb_length, "/chosen",
> + if (setup_dtb_prop(&dtb_buf, &dtb_length, 0, "chosen",
> "bootargs", command_line,
> strlen(command_line) + 1))
> return -1;
> @@ -542,11 +543,11 @@ int zImage_arm_load(int argc, char **argv, const char *buf, off_t len,
> start = cpu_to_be32((unsigned long)(initrd_base));
> end = cpu_to_be32((unsigned long)(initrd_base + initrd_size));
>
> - if (setup_dtb_prop(&dtb_buf, &dtb_length, "/chosen",
> + if (setup_dtb_prop(&dtb_buf, &dtb_length, 0, "chosen",
> "linux,initrd-start", &start,
> sizeof(start)))
> return -1;
> - if (setup_dtb_prop(&dtb_buf, &dtb_length, "/chosen",
> + if (setup_dtb_prop(&dtb_buf, &dtb_length, 0, "chosen",
> "linux,initrd-end", &end,
> sizeof(end)))
> return -1;
> --
> 2.8.0
>
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
next prev parent reply other threads:[~2016-04-05 6:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-31 15:30 [PATCH 1/3] arm: properly handle a missing /chosen node in the DT Alban Bedel
2016-03-31 15:30 ` [PATCH 2/3] zImage-arm: Fix a return value check that use the wrong variable Alban Bedel
2016-03-31 15:31 ` [PATCH 3/3] zImage-arm: Add support for booting android images Alban Bedel
2016-04-05 6:33 ` Simon Horman [this message]
2016-04-05 9:34 ` [PATCH 1/3] arm: properly handle a missing /chosen node in the DT Nikolaus Schulz
2016-04-05 9:37 ` Nikolaus Schulz
2016-04-06 0:30 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160405063306.GA19694@verge.net.au \
--to=horms@verge.net.au \
--cc=alban.bedel@avionic-design.de \
--cc=kexec@lists.infradead.org \
--cc=nikolaus.schulz@avionic-design.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.