All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wei Liu <wei.liu2@citrix.com>
To: Fanny Dwargee <fdwargee6@gmail.com>
Cc: Wei Liu <wei.liu2@citrix.com>, xen-devel@lists.xen.org
Subject: Re: Stub domain crash on Xen v4.6.1
Date: Mon, 11 Apr 2016 12:06:38 +0100	[thread overview]
Message-ID: <20160411110638.GD1346@citrix.com> (raw)
In-Reply-To: <CAOz6fc_q+CGHCpqY+zWn4OdO4pNog-i4FFv2Y2m36dRs0h=wCw@mail.gmail.com>

On Thu, Apr 07, 2016 at 06:51:11PM +0200, Fanny Dwargee wrote:
> I'm sorry but this is my first attempt to use stubdom.
> 
> This is a test machine so feel free to propose xen recompilation adding
> printk's/obscured options or settings modification.
> 
> With regards,

Sorry for the late reply.

In the case successfully booting DomU, do you see similar error like
this in xl dmesg?

(d21) read error -1 on /local/domain/21/device/vbd/768 at offset 0, num bytes 512
(XEN) grant_table.c:525:d0v0 Bad flags (0) or dom (0). (expected dom 0)
(d21) read error -1 on /local/domain/21/device/vbd/768 at offset 0, num bytes 512
(XEN) grant_table.c:525:d0v0 Bad flags (0) or dom (0). (expected dom 0)

Another thing to try is to add to your config without
device_model_override=xxx,

  device_model_version="qemu-xen-traditional"

and see if it still works.

Here is why: the default device model is upstream qemu, but when you
need to use stubdom, the device model is another version of qemu
(qemu-trad). The newly added config option forces Xen to use the same
qemu that would be used when stubdom is in use. It's useful to figure
out if qemu-trad is not functioning.


Wei.

> 
> Fanny
> 
> 2016-04-07 18:13 GMT+02:00 Wei Liu <wei.liu2@citrix.com>:
> 
> > On Wed, Apr 06, 2016 at 02:49:19PM +0200, Fanny Dwargee wrote:
> > > Hi Wei,
> > >
> > > first: thanks for your effort. :)
> > >
> > > Find attached the 'xl create' output and the
> > > /var/log/xen/console/hypervisor.log
> > > files after creating the same domain without the
> > > 'device_model_stubdomain_override' configuration option.
> > >
> > > 'xl list' command output...
> > > Name                 ID   Mem VCPUs      State   Time(s)
> > > Domain-0              0  1023     2     r-----   11608.1
> > > win7-sp1-x64-2       28  2048     1     ------       0.4
> > >
> >
> > I was hoping that you somehow had a running setup with stubdom enabled.
> > Have you tried earlier version of Xen or is this your first attempt to
> > use stubdom?
> >
> > Wei.
> >
> > > Regards,
> > >
> > > Fanny
> > >
> > >
> > >
> > >
> > > 2016-04-06 13:12 GMT+02:00 Wei Liu <wei.liu2@citrix.com>:
> > >
> > > > On Tue, Apr 05, 2016 at 05:17:00PM +0200, Fanny Dwargee wrote:
> > > > > Hi,
> > > > >
> > > > > after adding the 'device_model_stubdomain_override = 1' to an
> > otherwise
> > > > > fine configuration the domain crashes on start.
> > > > >
> > > > > Xen is v4.6.1 compiled from source on Debian Jessie 64bits this way:
> > > > >
> > > > >    - ./configure --enable-stubdom --enable-githttp
> > > > >    - make dist-xen
> > > > >    - make dist-tools
> > > > >    - make dist-stubdom
> > > > >    - make install-xen
> > > > >    - make install-tools
> > > > >    - make install-stubdom
> > > > >
> > > > > As pointed out before the same configuration file without the '
> > > > > device_model_stubdomain_override' works flawlessly.
> > > > >
> > > > > This is the 'xl list' command output while the domain is starting:
> > > > >
> > > > > Name                    ID   Mem VCPUs      State   Time(s)
> > > > > Domain-0                 0  1022     2     r-----     318.3
> > > > > win7-sp1-x64-2          20  2048     1     r-----       5.5
> > > > > win7-sp1-x64-2-dm       21    44     1     r-----       6.0
> > > > >
> > > > >
> > > > > As you can see both domains are started (the stub and the original
> > > > domain)
> > > > >
> > > > > Find attached the domain configuration file, 'xl info' output, 'xl
> > > > create'
> > > > > output and the /var/log/xen/console/hypervisor.log file, notice the
> > grant
> > > > > table error on console-hypervisor.log
> > > > >
> > > > > I'd very grateful for any help finding the cause of this problem.
> > > > >
> > > >
> > > >
> > > > The hypervsior log show some error, but unfortunately it is not
> > > > immediately clear what went wrong.
> > > >
> > > > Do you have a working base line setup so that I can compare the
> > > > difference?
> > > >
> > > > Wei.
> > > >
> > > > > Best regards,
> > > > >
> > > > > Fanny
> > > >
> > > >
> >
> >
> >
> >

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  reply	other threads:[~2016-04-11 11:06 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-05 15:17 Stub domain crash on Xen v4.6.1 Fanny Dwargee
2016-04-06 11:12 ` Wei Liu
2016-04-06 12:49   ` Fanny Dwargee
2016-04-07 16:13     ` Wei Liu
2016-04-07 16:51       ` Fanny Dwargee
2016-04-11 11:06         ` Wei Liu [this message]
2016-04-12  8:36 ` Wei Liu
2016-04-12  9:44   ` Fanny Dwargee
2016-04-12  9:49     ` Wei Liu
  -- strict thread matches above, loose matches on Subject: below --
2016-04-12  8:27 Fanny Dwargee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160411110638.GD1346@citrix.com \
    --to=wei.liu2@citrix.com \
    --cc=fdwargee6@gmail.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.