From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Prarit Bhargava <prarit@redhat.com>
Cc: linux-kernel@vger.kernel.org,
Robert Moore <robert.moore@intel.com>,
Lv Zheng <lv.zheng@intel.com>,
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org, devel@acpica.org
Subject: Re: [PATCH] acpi/acpica: fix Thunderbolt hotplug
Date: Fri, 15 Apr 2016 10:39:50 +0300 [thread overview]
Message-ID: <20160415073950.GC1714@lahna.fi.intel.com> (raw)
In-Reply-To: <1459291540-8746-1-git-send-email-prarit@redhat.com>
Bob, Rafael, any comments about this?
This seems to solve a real issue with Thunderbolt hotplug on Dell XPS
laptops. I do not know ACPICA that well to tell if this is 100% correct
fix but many reporters say it fixes the problem they are facing:
https://bugzilla.kernel.org/show_bug.cgi?id=115121
On Tue, Mar 29, 2016 at 06:45:40PM -0400, Prarit Bhargava wrote:
> The following hung task trace is seen when hotplugging
> an ethernet dongle in a Thunderbolt port on Linux.
>
> INFO: task kworker/0:4:1468 blocked for more than 120 seconds.
> Tainted: G W 4.6.0-rc1+ #1
> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> kworker/0:4 D ffff8802a265ba38 13344 1468 2 0x00000000
> Workqueue: kacpid acpi_os_execute_deferred
> ffff8802a265ba38 ffff8802a265ba00 ffffffff81130200 ffffffff81e0d580
> ffff88029e5eb340 ffff8802a265c000 ffff88029d69d000 ffff88029e5eb340
> ffffffff818c1b8d ffff8802b64e8758 ffff8802a265ba50 ffffffff818bdfcc
> Call Trace:
> [<ffffffff81130200>] ? test_callback+0x10/0x30
> [<ffffffff818c1b8d>] ? __down_timeout+0x5d/0xd0
> [<ffffffff818bdfcc>] schedule+0x3c/0x90
> [<ffffffff818c2d60>] schedule_timeout+0x210/0x360
> [<ffffffff8103fc89>] ? sched_clock+0x9/0x10
> [<ffffffff810ee51c>] ? local_clock+0x1c/0x20
> [<ffffffff81110c16>] ? mark_held_locks+0x76/0xa0
> [<ffffffff818c3cfc>] ? _raw_spin_unlock_irq+0x2c/0x40
> [<ffffffff818c1b8d>] ? __down_timeout+0x5d/0xd0
> [<ffffffff81110d35>] ? trace_hardirqs_on_caller+0xf5/0x1b0
> [<ffffffff818c1b8d>] ? __down_timeout+0x5d/0xd0
> [<ffffffff818c1bac>] __down_timeout+0x7c/0xd0
> [<ffffffff818c44b2>] ? _raw_spin_lock_irqsave+0x82/0x90
> [<ffffffff8110b87c>] down_timeout+0x4c/0x60
> [<ffffffff814e3a9c>] acpi_os_wait_semaphore+0xaa/0x16a
> [<ffffffff81510f37>] acpi_ex_system_wait_mutex+0x81/0xfa
> [<ffffffff814f8796>] acpi_ds_begin_method_execution+0x25a/0x373
> [<ffffffff814f8cea>] acpi_ds_call_control_method+0x107/0x2e0
> [<ffffffff8151ed60>] acpi_ps_parse_aml+0x177/0x495
> [<ffffffff8151fa46>] acpi_ps_execute_method+0x1f7/0x2b9
> [<ffffffff81516c9a>] acpi_ns_evaluate+0x2ee/0x435
> [<ffffffff814ff84a>] acpi_ev_asynch_execute_gpe_method+0xbd/0x159
> [<ffffffff814e2a69>] acpi_os_execute_deferred+0x17/0x23
> [<ffffffff810d1fc2>] process_one_work+0x242/0x700
> [<ffffffff810d1f3a>] ? process_one_work+0x1ba/0x700
> [<ffffffff810d24ce>] worker_thread+0x4e/0x490
> [<ffffffff810d2480>] ? process_one_work+0x700/0x700
> [<ffffffff810d2480>] ? process_one_work+0x700/0x700
> [<ffffffff810d98b1>] kthread+0x101/0x120
> [<ffffffff81110d35>] ? trace_hardirqs_on_caller+0xf5/0x1b0
> [<ffffffff818c4832>] ret_from_fork+0x22/0x50
> [<ffffffff810d97b0>] ? kthread_create_on_node+0x250/0x250
> 2 locks held by kworker/0:4/1468:
> #0: ("kacpid"){.+.+.+}, at: [<ffffffff810d1f3a>] process_one_work+0x1ba/0x700
> #1: ((&dpc->work)){+.+.+.}, at: [<ffffffff810d1f3a>] process_one_work+0x1ba/0x700
>
> The issue appears to be that the kworker thread attempts to acquire the
> _E42 method's mutex twice when executing acpi_ps_execute_method() and
> recursing through the entry method.
>
> The current code does take the possiblity of this recursion into account,
> however, it is only for the case where the walk_state has been populated.
>
> This can be fixed by setting the thread id in the !walk_state case to
> allow for recursion.
>
> Cc: Robert Moore <robert.moore@intel.com>
> Cc: Lv Zheng <lv.zheng@intel.com>
> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
> Cc: Len Brown <lenb@kernel.org>
> Cc: linux-acpi@vger.kernel.org
> Cc: devel@acpica.org
> Signed-off-by: Prarit Bhargava <prarit@redhat.com>
> ---
> drivers/acpi/acpica/dsmethod.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
> index 1982310..93799db 100644
> --- a/drivers/acpi/acpica/dsmethod.c
> +++ b/drivers/acpi/acpica/dsmethod.c
> @@ -428,6 +428,9 @@ acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node,
> obj_desc->method.mutex->mutex.
> original_sync_level =
> obj_desc->method.mutex->mutex.sync_level;
> +
> + obj_desc->method.mutex->mutex.thread_id =
> + acpi_os_get_thread_id();
> }
> }
>
> --
> 1.7.9.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-04-15 7:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-29 22:45 [PATCH] acpi/acpica: fix Thunderbolt hotplug Prarit Bhargava
2016-04-15 7:39 ` Mika Westerberg [this message]
2016-04-15 16:21 ` [Devel] " Moore, Robert
2016-04-15 16:21 ` Moore, Robert
2016-04-15 17:03 ` Prarit Bhargava
-- strict thread matches above, loose matches on Subject: below --
2016-04-15 17:05 [Devel] " Moore, Robert
2016-04-15 17:05 ` Moore, Robert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160415073950.GC1714@lahna.fi.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=devel@acpica.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lv.zheng@intel.com \
--cc=prarit@redhat.com \
--cc=rafael.j.wysocki@intel.com \
--cc=robert.moore@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.