From: Tony Lindgren <tony@atomide.com>
To: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org, mingo@kernel.org,
Russell King <linux@arm.linux.org.uk>,
Steven Rostedt <rostedt@goodmis.org>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
Date: Tue, 26 Apr 2016 12:39:50 -0700 [thread overview]
Message-ID: <20160426193949.GP5995@atomide.com> (raw)
In-Reply-To: <20160426190755.GK3715@linux.vnet.ibm.com>
* Paul E. McKenney <paulmck@linux.vnet.ibm.com> [160426 12:08]:
> On Tue, Apr 26, 2016 at 11:29:39AM -0700, Tony Lindgren wrote:
> > * Paul E. McKenney <paulmck@linux.vnet.ibm.com> [160426 10:53]:
> > > Does the following patch help?
> >
> > It just changes the output.. See below.
>
> Ah -- you need both patches.
Oops sorry, I though I had the first one already from next..
> These are on -rcu at:
>
> 501889db6fee (arm: Use _rcuidle tracepoint to allow use from idle)
> 99cd56ad86d2 (rm: Use more _rcuidle tracepoints to allow use from idle)
With these omap4 is now OK. But omap3 produces yet another warning,
See below :)
Regards,
Tony
8< ------------------
===============================
[ INFO: suspicious RCU usage. ]
4.6.0-rc5-next-20160426+ #1114 Not tainted
-------------------------------
include/trace/events/clk.h:59 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
2 locks held by swapper/0/0:
#0: (&oh->hwmod_key#30){......}, at: [<c0121b40>] omap_hwmod_idle+0x18/0x44
#1: (enable_lock){......}, at: [<c0630998>] clk_enable_lock+0x18/0x124
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1114
Hardware name: Generic OMAP36xx (Flattened Device Tree)
[<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
[<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
[<c047fd68>] (dump_stack) from [<c0631618>] (clk_core_disable+0x17c/0x348)
[<c0631618>] (clk_core_disable) from [<c0632774>] (clk_disable+0x24/0x30)
[<c0632774>] (clk_disable) from [<c0120590>] (_disable_clocks+0x18/0x7c)
[<c0120590>] (_disable_clocks) from [<c0121680>] (_idle+0x12c/0x230)
[<c0121680>] (_idle) from [<c0121b4c>] (omap_hwmod_idle+0x24/0x44)
[<c0121b4c>] (omap_hwmod_idle) from [<c0122c24>] (omap_device_idle+0x3c/0x90)
[<c0122c24>] (omap_device_idle) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
[<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
[<c052cc54>] (rpm_callback) from [<c052d150>] (rpm_suspend+0x100/0x768)
[<c052d150>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
[<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5
c/0x70)
[<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x2
44)
[<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
[<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
[<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
[<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
[<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
Date: Tue, 26 Apr 2016 12:39:50 -0700 [thread overview]
Message-ID: <20160426193949.GP5995@atomide.com> (raw)
In-Reply-To: <20160426190755.GK3715@linux.vnet.ibm.com>
* Paul E. McKenney <paulmck@linux.vnet.ibm.com> [160426 12:08]:
> On Tue, Apr 26, 2016 at 11:29:39AM -0700, Tony Lindgren wrote:
> > * Paul E. McKenney <paulmck@linux.vnet.ibm.com> [160426 10:53]:
> > > Does the following patch help?
> >
> > It just changes the output.. See below.
>
> Ah -- you need both patches.
Oops sorry, I though I had the first one already from next..
> These are on -rcu at:
>
> 501889db6fee (arm: Use _rcuidle tracepoint to allow use from idle)
> 99cd56ad86d2 (rm: Use more _rcuidle tracepoints to allow use from idle)
With these omap4 is now OK. But omap3 produces yet another warning,
See below :)
Regards,
Tony
8< ------------------
===============================
[ INFO: suspicious RCU usage. ]
4.6.0-rc5-next-20160426+ #1114 Not tainted
-------------------------------
include/trace/events/clk.h:59 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
2 locks held by swapper/0/0:
#0: (&oh->hwmod_key#30){......}, at: [<c0121b40>] omap_hwmod_idle+0x18/0x44
#1: (enable_lock){......}, at: [<c0630998>] clk_enable_lock+0x18/0x124
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1114
Hardware name: Generic OMAP36xx (Flattened Device Tree)
[<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
[<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
[<c047fd68>] (dump_stack) from [<c0631618>] (clk_core_disable+0x17c/0x348)
[<c0631618>] (clk_core_disable) from [<c0632774>] (clk_disable+0x24/0x30)
[<c0632774>] (clk_disable) from [<c0120590>] (_disable_clocks+0x18/0x7c)
[<c0120590>] (_disable_clocks) from [<c0121680>] (_idle+0x12c/0x230)
[<c0121680>] (_idle) from [<c0121b4c>] (omap_hwmod_idle+0x24/0x44)
[<c0121b4c>] (omap_hwmod_idle) from [<c0122c24>] (omap_device_idle+0x3c/0x90)
[<c0122c24>] (omap_device_idle) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
[<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
[<c052cc54>] (rpm_callback) from [<c052d150>] (rpm_suspend+0x100/0x768)
[<c052d150>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
[<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5
c/0x70)
[<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x2
44)
[<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
[<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
[<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
[<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
[<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
next prev parent reply other threads:[~2016-04-26 19:39 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 20:48 [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle Paul E. McKenney
2016-04-25 20:48 ` Paul E. McKenney
2016-04-25 20:48 ` Paul E. McKenney
2016-04-26 15:00 ` Tony Lindgren
2016-04-26 15:00 ` Tony Lindgren
2016-04-26 17:52 ` Paul E. McKenney
2016-04-26 17:52 ` Paul E. McKenney
2016-04-26 18:29 ` Tony Lindgren
2016-04-26 18:29 ` Tony Lindgren
2016-04-26 19:07 ` Paul E. McKenney
2016-04-26 19:07 ` Paul E. McKenney
2016-04-26 19:39 ` Tony Lindgren [this message]
2016-04-26 19:39 ` Tony Lindgren
2016-04-26 19:44 ` Steven Rostedt
2016-04-26 19:44 ` Steven Rostedt
2016-04-26 19:51 ` Paul E. McKenney
2016-04-26 19:51 ` Paul E. McKenney
2016-04-26 19:52 ` Steven Rostedt
2016-04-26 19:52 ` Steven Rostedt
2016-04-26 20:06 ` Paul E. McKenney
2016-04-26 20:06 ` Paul E. McKenney
2016-04-26 19:51 ` Tony Lindgren
2016-04-26 19:51 ` Tony Lindgren
2016-04-26 20:06 ` Paul E. McKenney
2016-04-26 20:06 ` Paul E. McKenney
2016-04-26 20:11 ` Paul E. McKenney
2016-04-26 20:11 ` Paul E. McKenney
2016-04-26 20:25 ` Tony Lindgren
2016-04-26 20:25 ` Tony Lindgren
2016-04-26 20:25 ` Tony Lindgren
2016-04-26 20:41 ` Paul E. McKenney
2016-04-26 20:41 ` Paul E. McKenney
2016-04-26 20:46 ` Tony Lindgren
2016-04-26 20:46 ` Tony Lindgren
2016-04-26 20:52 ` Steven Rostedt
2016-04-26 20:52 ` Steven Rostedt
2016-04-26 21:08 ` Paul E. McKenney
2016-04-26 21:08 ` Paul E. McKenney
2016-04-26 21:04 ` Paul E. McKenney
2016-04-26 21:04 ` Paul E. McKenney
2016-04-26 21:04 ` Paul E. McKenney
2016-04-26 21:12 ` Tony Lindgren
2016-04-26 21:12 ` Tony Lindgren
2016-04-26 21:26 ` Paul E. McKenney
2016-04-26 21:26 ` Paul E. McKenney
2016-04-26 21:36 ` Tony Lindgren
2016-04-26 21:36 ` Tony Lindgren
2016-04-26 20:16 ` Steven Rostedt
2016-04-26 20:16 ` Steven Rostedt
2016-04-26 20:36 ` Paul E. McKenney
2016-04-26 20:36 ` Paul E. McKenney
2016-04-26 19:47 ` Paul E. McKenney
2016-04-26 19:47 ` Paul E. McKenney
2016-04-26 19:17 ` Steven Rostedt
2016-04-26 19:17 ` Steven Rostedt
2016-04-26 19:41 ` Tony Lindgren
2016-04-26 19:41 ` Tony Lindgren
2016-04-26 19:42 ` Paul E. McKenney
2016-04-26 19:42 ` Paul E. McKenney
2016-04-26 19:49 ` Steven Rostedt
2016-04-26 19:49 ` Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160426193949.GP5995@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mingo@kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.