All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Tony Lindgren <tony@atomide.com>,
	linux-kernel@vger.kernel.org, mingo@kernel.org,
	Russell King <linux@arm.linux.org.uk>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
Date: Tue, 26 Apr 2016 12:51:21 -0700	[thread overview]
Message-ID: <20160426195121.GN3715@linux.vnet.ibm.com> (raw)
In-Reply-To: <20160426154414.7bb33de4@gandalf.local.home>

On Tue, Apr 26, 2016 at 03:44:14PM -0400, Steven Rostedt wrote:
> On Tue, 26 Apr 2016 12:39:50 -0700
> Tony Lindgren <tony@atomide.com> wrote:
> 
> 
> > With these omap4 is now OK. But omap3 produces yet another warning,
> > See below :)
> > 
> > Regards,
> > 
> > Tony
> > 
> > 8< ------------------
> > ===============================
> > [ INFO: suspicious RCU usage. ]
> > 4.6.0-rc5-next-20160426+ #1114 Not tainted
> > -------------------------------
> > include/trace/events/clk.h:59 suspicious rcu_dereference_check() usage!
> > 
> > other info that might help us debug this:
> > 
> > 
> > RCU used illegally from idle CPU!
> > rcu_scheduler_active = 1, debug_locks = 0
> > RCU used illegally from extended quiescent state!
> > 2 locks held by swapper/0/0:
> >  #0:  (&oh->hwmod_key#30){......}, at: [<c0121b40>] omap_hwmod_idle+0x18/0x44
> >  #1:  (enable_lock){......}, at: [<c0630998>] clk_enable_lock+0x18/0x124
> > 
> > stack backtrace:
> > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1114
> > Hardware name: Generic OMAP36xx (Flattened Device Tree)
> > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> > [<c047fd68>] (dump_stack) from [<c0631618>] (clk_core_disable+0x17c/0x348)
> > [<c0631618>] (clk_core_disable) from [<c0632774>] (clk_disable+0x24/0x30)
> > [<c0632774>] (clk_disable) from [<c0120590>] (_disable_clocks+0x18/0x7c)
> > [<c0120590>] (_disable_clocks) from [<c0121680>] (_idle+0x12c/0x230)
> > [<c0121680>] (_idle) from [<c0121b4c>] (omap_hwmod_idle+0x24/0x44)
> > [<c0121b4c>] (omap_hwmod_idle) from [<c0122c24>] (omap_device_idle+0x3c/0x90)
> > [<c0122c24>] (omap_device_idle) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
> > [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
> > [<c052cc54>] (rpm_callback) from [<c052d150>] (rpm_suspend+0x100/0x768)
> > [<c052d150>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
> > [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5
> > c/0x70)
> > [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x2
> > 44)
> > [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> > [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
> > [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
> 
> *Whack* *Whack* *Whack*!!!
> 
> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Or use Steven's identical patch, your choice.  ;-)

							Thanx, Paul

> ---
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index fb74dc1f7520..4fa43c02d682 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -682,12 +682,12 @@ static void clk_core_disable(struct clk_core *core)
>  	if (--core->enable_count > 0)
>  		return;
> 
> -	trace_clk_disable(core);
> +	trace_clk_disable_rcuidle(core);
> 
>  	if (core->ops->disable)
>  		core->ops->disable(core->hw);
> 
> -	trace_clk_disable_complete(core);
> +	trace_clk_disable_complete_rcuidle(core);
> 
>  	clk_core_disable(core->parent);
>  }
> 

WARNING: multiple messages have this Message-ID (diff)
From: paulmck@linux.vnet.ibm.com (Paul E. McKenney)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
Date: Tue, 26 Apr 2016 12:51:21 -0700	[thread overview]
Message-ID: <20160426195121.GN3715@linux.vnet.ibm.com> (raw)
In-Reply-To: <20160426154414.7bb33de4@gandalf.local.home>

On Tue, Apr 26, 2016 at 03:44:14PM -0400, Steven Rostedt wrote:
> On Tue, 26 Apr 2016 12:39:50 -0700
> Tony Lindgren <tony@atomide.com> wrote:
> 
> 
> > With these omap4 is now OK. But omap3 produces yet another warning,
> > See below :)
> > 
> > Regards,
> > 
> > Tony
> > 
> > 8< ------------------
> > ===============================
> > [ INFO: suspicious RCU usage. ]
> > 4.6.0-rc5-next-20160426+ #1114 Not tainted
> > -------------------------------
> > include/trace/events/clk.h:59 suspicious rcu_dereference_check() usage!
> > 
> > other info that might help us debug this:
> > 
> > 
> > RCU used illegally from idle CPU!
> > rcu_scheduler_active = 1, debug_locks = 0
> > RCU used illegally from extended quiescent state!
> > 2 locks held by swapper/0/0:
> >  #0:  (&oh->hwmod_key#30){......}, at: [<c0121b40>] omap_hwmod_idle+0x18/0x44
> >  #1:  (enable_lock){......}, at: [<c0630998>] clk_enable_lock+0x18/0x124
> > 
> > stack backtrace:
> > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1114
> > Hardware name: Generic OMAP36xx (Flattened Device Tree)
> > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> > [<c047fd68>] (dump_stack) from [<c0631618>] (clk_core_disable+0x17c/0x348)
> > [<c0631618>] (clk_core_disable) from [<c0632774>] (clk_disable+0x24/0x30)
> > [<c0632774>] (clk_disable) from [<c0120590>] (_disable_clocks+0x18/0x7c)
> > [<c0120590>] (_disable_clocks) from [<c0121680>] (_idle+0x12c/0x230)
> > [<c0121680>] (_idle) from [<c0121b4c>] (omap_hwmod_idle+0x24/0x44)
> > [<c0121b4c>] (omap_hwmod_idle) from [<c0122c24>] (omap_device_idle+0x3c/0x90)
> > [<c0122c24>] (omap_device_idle) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
> > [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
> > [<c052cc54>] (rpm_callback) from [<c052d150>] (rpm_suspend+0x100/0x768)
> > [<c052d150>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
> > [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5
> > c/0x70)
> > [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x2
> > 44)
> > [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> > [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
> > [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
> 
> *Whack* *Whack* *Whack*!!!
> 
> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Or use Steven's identical patch, your choice.  ;-)

							Thanx, Paul

> ---
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index fb74dc1f7520..4fa43c02d682 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -682,12 +682,12 @@ static void clk_core_disable(struct clk_core *core)
>  	if (--core->enable_count > 0)
>  		return;
> 
> -	trace_clk_disable(core);
> +	trace_clk_disable_rcuidle(core);
> 
>  	if (core->ops->disable)
>  		core->ops->disable(core->hw);
> 
> -	trace_clk_disable_complete(core);
> +	trace_clk_disable_complete_rcuidle(core);
> 
>  	clk_core_disable(core->parent);
>  }
> 

  reply	other threads:[~2016-04-26 19:51 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-25 20:48 [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle Paul E. McKenney
2016-04-25 20:48 ` Paul E. McKenney
2016-04-25 20:48 ` Paul E. McKenney
2016-04-26 15:00 ` Tony Lindgren
2016-04-26 15:00   ` Tony Lindgren
2016-04-26 17:52   ` Paul E. McKenney
2016-04-26 17:52     ` Paul E. McKenney
2016-04-26 18:29     ` Tony Lindgren
2016-04-26 18:29       ` Tony Lindgren
2016-04-26 19:07       ` Paul E. McKenney
2016-04-26 19:07         ` Paul E. McKenney
2016-04-26 19:39         ` Tony Lindgren
2016-04-26 19:39           ` Tony Lindgren
2016-04-26 19:44           ` Steven Rostedt
2016-04-26 19:44             ` Steven Rostedt
2016-04-26 19:51             ` Paul E. McKenney [this message]
2016-04-26 19:51               ` Paul E. McKenney
2016-04-26 19:52               ` Steven Rostedt
2016-04-26 19:52                 ` Steven Rostedt
2016-04-26 20:06                 ` Paul E. McKenney
2016-04-26 20:06                   ` Paul E. McKenney
2016-04-26 19:51             ` Tony Lindgren
2016-04-26 19:51               ` Tony Lindgren
2016-04-26 20:06               ` Paul E. McKenney
2016-04-26 20:06                 ` Paul E. McKenney
2016-04-26 20:11                 ` Paul E. McKenney
2016-04-26 20:11                   ` Paul E. McKenney
2016-04-26 20:25                   ` Tony Lindgren
2016-04-26 20:25                     ` Tony Lindgren
2016-04-26 20:25                     ` Tony Lindgren
2016-04-26 20:41                     ` Paul E. McKenney
2016-04-26 20:41                       ` Paul E. McKenney
2016-04-26 20:46                       ` Tony Lindgren
2016-04-26 20:46                         ` Tony Lindgren
2016-04-26 20:52                         ` Steven Rostedt
2016-04-26 20:52                           ` Steven Rostedt
2016-04-26 21:08                           ` Paul E. McKenney
2016-04-26 21:08                             ` Paul E. McKenney
2016-04-26 21:04                         ` Paul E. McKenney
2016-04-26 21:04                           ` Paul E. McKenney
2016-04-26 21:04                           ` Paul E. McKenney
2016-04-26 21:12                           ` Tony Lindgren
2016-04-26 21:12                             ` Tony Lindgren
2016-04-26 21:26                             ` Paul E. McKenney
2016-04-26 21:26                               ` Paul E. McKenney
2016-04-26 21:36                               ` Tony Lindgren
2016-04-26 21:36                                 ` Tony Lindgren
2016-04-26 20:16                 ` Steven Rostedt
2016-04-26 20:16                   ` Steven Rostedt
2016-04-26 20:36                   ` Paul E. McKenney
2016-04-26 20:36                     ` Paul E. McKenney
2016-04-26 19:47           ` Paul E. McKenney
2016-04-26 19:47             ` Paul E. McKenney
2016-04-26 19:17       ` Steven Rostedt
2016-04-26 19:17         ` Steven Rostedt
2016-04-26 19:41         ` Tony Lindgren
2016-04-26 19:41           ` Tony Lindgren
2016-04-26 19:42         ` Paul E. McKenney
2016-04-26 19:42           ` Paul E. McKenney
2016-04-26 19:49           ` Steven Rostedt
2016-04-26 19:49             ` Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160426195121.GN3715@linux.vnet.ibm.com \
    --to=paulmck@linux.vnet.ibm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mingo@kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.