All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Grigori Goronzy <greg@chown.ath.cx>
Cc: Johan Hovold <johan@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 09/13] USB: ch341: fix coding style
Date: Fri, 29 Apr 2016 15:29:56 +0200	[thread overview]
Message-ID: <20160429132956.GM22229@localhost> (raw)
In-Reply-To: <1460754856-27908-10-git-send-email-greg@chown.ath.cx>

On Fri, Apr 15, 2016 at 11:14:12PM +0200, Grigori Goronzy wrote:
> No functional change.  The following adjustments were made to be more in
> line with official coding style and to be more consistent.
> 
> Stop mixing tabs and spaces for alignment.  Stop putting labels and
> statements into the same line.  Use braces consistently for a single
> statement.
> 
> v2: drop most changes, particularly indentation changes.
> 
> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
> ---
>  drivers/usb/serial/ch341.c | 18 +++++++++++-------
>  1 file changed, 11 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
> index 7ca21a1..f524aa9 100644
> --- a/drivers/usb/serial/ch341.c
> +++ b/drivers/usb/serial/ch341.c
> @@ -133,7 +133,7 @@ static int ch341_control_in(struct usb_device *dev,
>  }
>  
>  static int ch341_init_set_baudrate(struct usb_device *dev,
> -			      struct ch341_private *priv, unsigned ctrl)
> +				   struct ch341_private *priv, unsigned ctrl)

This could go into the patch that renamed the function.

>  {
>  	short a;
>  	int r;
> @@ -187,10 +187,12 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
>  		spin_lock_irqsave(&priv->lock, flags);
>  		priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
>  		spin_unlock_irqrestore(&priv->lock, flags);
> -	} else
> +	} else {
>  		r = -EPROTO;
> +	}
>  
> -out:	kfree(buffer);
> +out:
> +	kfree(buffer);
>  	return r;
>  }
>  
> @@ -241,7 +243,8 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
>  	/* expect 0x9f 0xee */
>  	r = ch341_get_status(dev, priv);
>  
> -out:	kfree(buffer);
> +out:
> +	kfree(buffer);
>  	return r;
>  }
>  
> @@ -265,7 +268,8 @@ static int ch341_port_probe(struct usb_serial_port *port)
>  	usb_set_serial_port_data(port, priv);
>  	return 0;
>  
> -error:	kfree(priv);
> +error:
> +	kfree(priv);
>  	return r;
>  }
>  
> @@ -479,7 +483,7 @@ static int ch341_tiocmset(struct tty_struct *tty,
>  }
>  
>  static void ch341_update_line_status(struct usb_serial_port *port,
> -					unsigned char *data, size_t len)
> +				     unsigned char *data, size_t len)

This chunk isn't really needed (and is inconsistent with your commit
message).

>  {
>  	struct ch341_private *priv = usb_get_serial_port_data(port);
>  	struct tty_struct *tty;
> @@ -600,7 +604,7 @@ static struct usb_serial_driver ch341_device = {
>  	.id_table          = id_table,
>  	.num_ports         = 1,
>  	.open              = ch341_open,
> -	.dtr_rts	   = ch341_dtr_rts,
> +	.dtr_rts           = ch341_dtr_rts,

How about fixing all the entries to use only tabs to align the RHS
instead?

>  	.carrier_raised	   = ch341_carrier_raised,
>  	.close             = ch341_close,
>  	.set_termios       = ch341_set_termios,

Thanks,
Johan

  reply	other threads:[~2016-04-29 13:29 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-15 21:14 Major improvements to the ch341 driver v4 Grigori Goronzy
2016-04-15 21:14 ` [PATCH v4 01/13] USB: ch341: fix error handling on resume Grigori Goronzy
2016-04-29 12:16   ` Johan Hovold
2016-04-29 15:11     ` Grigori Goronzy
2016-05-02 13:45       ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 02/13] USB: ch341: add LCR register definitions Grigori Goronzy
2016-04-29 12:18   ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 03/13] USB: ch341: add definitions for modem control Grigori Goronzy
2016-04-29 12:22   ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 04/13] USB: ch341: fix USB buffer allocations Grigori Goronzy
2016-04-29 12:52   ` Johan Hovold
2016-04-29 15:12     ` Grigori Goronzy
2016-04-15 21:14 ` [PATCH v4 05/13] USB: ch341: reinitialize chip on reconfiguration Grigori Goronzy
2016-04-29 13:03   ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 06/13] USB: ch341: add support for parity, frame length, stop bits Grigori Goronzy
2016-04-29 13:11   ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 07/13] USB: ch341: add debug output for chip version Grigori Goronzy
2016-04-29 13:13   ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 08/13] USB: ch341: add support for RTS/CTS flow control Grigori Goronzy
2016-04-29 13:23   ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 09/13] USB: ch341: fix coding style Grigori Goronzy
2016-04-29 13:29   ` Johan Hovold [this message]
2016-04-15 21:14 ` [PATCH v4 10/13] USB: ch341: clean up messages Grigori Goronzy
2016-04-29 13:40   ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 11/13] USB: ch341: improve B0 handling Grigori Goronzy
2016-04-29 13:41   ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 12/13] USB: ch341: get rid of default configuration Grigori Goronzy
2016-04-29 13:43   ` Johan Hovold
2016-04-15 21:14 ` [PATCH v4 13/13] USB: ch341: implement tx_empty callback Grigori Goronzy
2016-04-29 13:47   ` Johan Hovold
2016-04-28 23:24 ` Major improvements to the ch341 driver v4 Grigori Goronzy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160429132956.GM22229@localhost \
    --to=johan@kernel.org \
    --cc=greg@chown.ath.cx \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.