From: Wjatscheslaw Stoljarski <wjatscheslaw.stoljarski@kiwigrid.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH] net: fec: add simple support for fixed-link
Date: Wed, 4 May 2016 16:55:14 +0200 [thread overview]
Message-ID: <20160504145514.GA15697@gmail.com> (raw)
In-Reply-To: <20160504131121.GO19714@pengutronix.de>
Hi Sascha,
it works for me. Thanks!
On Wed, May 04, 2016 at 03:11:21PM +0200, Sascha Hauer wrote:
> Hi Wjatscheslaw,
>
> On Wed, May 04, 2016 at 09:28:55AM +0200, Wjatscheslaw Stoljarski wrote:
> > Signed-off-by: Wjatscheslaw Stoljarski <wjatscheslaw.stoljarski@kiwigrid.com>
> > ---
> > drivers/net/fec_imx.c | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
>
> Instead of introducing a i.MX FEC specific solution for this problem,
> can you test the following patch? It currently lacks support for the
> speed/full-duplex properties, but with these added we could apply the
> patch.
>
> Sascha
>
> -------------------------------8<------------------------------
>
> From 4a2bfb1400dff8c5d4a14e0faeb653974c3e4acf Mon Sep 17 00:00:00 2001
> From: Sascha Hauer <s.hauer@pengutronix.de>
> Date: Thu, 11 Feb 2016 11:05:11 +0100
> Subject: [PATCH] net: phy: Add fixed link support
>
> Some network devices, especially when connected to a switch, are
> connected via a fixed link. This patch adds support for a fixed phy
> configured through device tree.
> TODO: Add support for the "speed" and "full-duplex" properties.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> drivers/net/phy/phy.c | 49 +++++++++++++++++++++++++++++++++++++++++--------
> include/linux/phy.h | 2 +-
> 2 files changed, 42 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index be2c68b..73176fb 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -52,9 +52,11 @@ int phy_update_status(struct phy_device *phydev)
> int ret;
> int oldspeed = phydev->speed, oldduplex = phydev->duplex;
>
> - ret = drv->read_status(phydev);
> - if (ret)
> - return ret;
> + if (drv) {
> + ret = drv->read_status(phydev);
> + if (ret)
> + return ret;
> + }
>
> if (phydev->speed == oldspeed && phydev->duplex == oldduplex)
> return 0;
> @@ -173,10 +175,15 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id)
> phydev->bus = bus;
> phydev->dev.bus = &mdio_bus_type;
>
> - sprintf(phydev->dev.name, "mdio%d-phy%02x",
> + if (bus) {
> + sprintf(phydev->dev.name, "mdio%d-phy%02x",
> phydev->bus->dev.id,
> phydev->addr);
> - phydev->dev.id = DEVICE_ID_SINGLE;
> + phydev->dev.id = DEVICE_ID_SINGLE;
> + } else {
> + sprintf(phydev->dev.name, "fixed-phy");
> + phydev->dev.id = DEVICE_ID_DYNAMIC;
> + }
>
> return phydev;
> }
> @@ -245,7 +252,9 @@ static void phy_config_aneg(struct phy_device *phydev)
> struct phy_driver *drv;
>
> drv = to_phy_driver(phydev->dev.driver);
> - drv->config_aneg(phydev);
> +
> + if (drv)
> + drv->config_aneg(phydev);
> }
>
> int phy_register_device(struct phy_device *phydev)
> @@ -255,13 +264,15 @@ int phy_register_device(struct phy_device *phydev)
> if (phydev->registered)
> return -EBUSY;
>
> - phydev->dev.parent = &phydev->bus->dev;
> + if (!phydev->dev.parent)
> + phydev->dev.parent = &phydev->bus->dev;
>
> ret = register_device(&phydev->dev);
> if (ret)
> return ret;
>
> - phydev->bus->phy_map[phydev->addr] = phydev;
> + if (phydev->bus)
> + phydev->bus->phy_map[phydev->addr] = phydev;
>
> phydev->registered = 1;
>
> @@ -289,6 +300,22 @@ void phy_unregister_device(struct phy_device *phydev)
> phydev->registered = 0;
> }
>
> +struct phy_device *of_phy_register_fixed_link(struct device_node *np, struct eth_device *edev)
> +{
> + struct phy_device *phydev;
> +
> + phydev = phy_device_create(NULL, 0, 0);
> +
> + phydev->dev.parent = &edev->dev;
> + phydev->registered = 1;
> + phydev->speed = 1000;
> + phydev->duplex = 1;
> + phydev->pause = phydev->asym_pause = 0;
> + phydev->link = 1;
> +
> + return phydev;
> +}
> +
> static struct phy_device *of_mdio_find_phy(struct eth_device *edev)
> {
> struct device_d *dev;
> @@ -305,6 +332,12 @@ static struct phy_device *of_mdio_find_phy(struct eth_device *edev)
> phy_node = of_parse_phandle(edev->parent->device_node, "phy", 0);
> if (!phy_node)
> phy_node = of_parse_phandle(edev->parent->device_node, "phy-device", 0);
> + if (!phy_node) {
> + phy_node = of_get_child_by_name(edev->parent->device_node, "fixed-link");
> + if (phy_node)
> + return of_phy_register_fixed_link(phy_node, edev);
> + }
> +
> if (!phy_node)
> return NULL;
>
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 38b0670..d7b10af 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -251,7 +251,7 @@ struct phy_driver {
>
> struct driver_d drv;
> };
> -#define to_phy_driver(d) container_of(d, struct phy_driver, drv)
> +#define to_phy_driver(d) ((d) ? container_of(d, struct phy_driver, drv) : NULL)
>
> #define PHY_ANY_ID "MATCH ANY PHY"
> #define PHY_ANY_UID 0xffffffff
> --
> 2.8.0.rc3
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-05-04 14:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-04 7:28 [PATCH] net: fec: add simple support for fixed-link Wjatscheslaw Stoljarski
2016-05-04 13:11 ` Sascha Hauer
2016-05-04 14:55 ` Wjatscheslaw Stoljarski [this message]
2016-05-09 6:31 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160504145514.GA15697@gmail.com \
--to=wjatscheslaw.stoljarski@kiwigrid.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.