All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Linus Lüssing" <linus.luessing@c0d3.blue>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: [B.A.T.M.A.N.] Kernel panic by BATMAN_V @WBMv9
Date: Fri, 6 May 2016 09:50:16 +0100	[thread overview]
Message-ID: <20160506085016.GA2811@otheros> (raw)

[-- Attachment #1: Type: text/plain, Size: 106 bytes --]

Just dumping this here, got a plane to catch.

Guido can explain how you can trigger this.

Cheers, Linus

[-- Attachment #2: wbm-crash-batman-v.log --]
[-- Type: text/plain, Size: 16548 bytes --]

Time: 1462523738.517396
Modules:	ath9k@873e0000+15476	ath9k_common@872e8000+4ace	pppoe@8722a000+1fd0	ppp_async@87228000+18b0	iptable_nat@87215000+300	batman_adv@872c0000+20e70	ath9k_hw@87380000+52341	ath@87278000+4e35	pppox@87213000+54a	ppp_generic@87238000+5082	nf_nat_ipv4@871f6000+e51	nf_conntrack_ipv6@87210000+1340	nf_conntrack_ipv4@87236000+1220	mac80211@87300000+6114a	ipt_REJECT@87231000+390	ipt_MASQUERADE@87233000+270	cfg80211@87240000+34c53	xt_time@871ca000+660	xt_tcpudp@871cf000+6a0	xt_state@871cb000+2b0	xt_nat@871c9000+430	xt_multiport@871c5000+4a0	xt_mark@871c3000+2a0	xt_mac@871c0000+270	xt_limit@871f3000+3e0	xt_id@87182000+1e0	xt_conntrack@87186000+870	xt_comment@87180000+1e0	xt_TCPMSS@87181000+a30	xt_REDIRECT@8719f000+420	xt_LOG@87119000+300	xt_CT@87118000+8b0	slhc@87076000+10cb	nf_reject_ipv4@87064000+723	nf_nat_masquerade_ipv4@87133000+56c	nf_nat_ftp@8707f000+4b0	nf_nat@87130000+22ab	nf_log_ipv4@870c8000+c40	nf_defrag_ipv6@8707c000+2377	nf_defrag_ipv4@87136000+326	nf_conntrack_rtcache@8718f000+990	nf_conntrack_ftp@871fa000+14a0	nf_conntrack@87190000+b9ab	iptable_raw@8707a000+280	iptable_mangle@8706b000+3b0	iptable_filter@87066000+2a0	ip_tables@8706c000+24cd	crc_ccitt@87074000+3fb	compat@87070000+3163	ledtrig_usbdev@87079000+790	libcrc32c@87117000+247	ip6t_REJECT@870de000+4a0	nf_reject_ipv6@870cb000+767	nf_log_ipv6@870cd000+ce0	nf_log_common@870ca000+8ef	ip6table_raw@8710b000+240	ip6table_mangle@870cf000+430	ip6table_filter@870f3000+260	ip6_tables@87110000+2441	x_tables@87108000+29f5	dummy@870f0000+560	ip6_tunnel@870d8000+4111	tunnel6@870f1000+65e	tun@8712c000+3aef	vfat@87bde000+1f00	fat@870e0000+b92f	ipv6@87140000+3eb08	arc4@870b6000+520	crypto_blkcipher@870b0000+2907	usb_storage@87050000+928f	uhci_hcd@87ba8000+4770	ohci_platform@87af5000+ac0	ohci_hcd@87b10000+56bf	ehci_platform@87b6a000+d30	ehci_hcd@87b08000+7d5c	sd_mod@87b98000+6410	scsi_mod@87b80000+14e87	gpio_button_hotplug@87b5e000+1170	ext4@87000000+4c13c	jbd2@87b70000+b9c2	mbcache@87b66000+11cd	usbcore@87b40000+1cbd4	nls_base@87b04000+1370	usb_common@87af6000+488	crc16@87af8000+3f7	crc32c_generic@87af7000+3a0	crypto_hash@87b00000+2602
<4>[   12.160000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
<7>[   12.170000] ath: EEPROM regdomain: 0x0
<7>[   12.170000] ath: EEPROM indicates default country code should be used
<7>[   12.170000] ath: doing EEPROM country->regdmn map search
<7>[   12.170000] ath: country maps to regdmn code: 0x3a
<7>[   12.170000] ath: Country alpha2 being used: US
<7>[   12.170000] ath: Regpair used: 0x3a
<7>[   12.180000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
<6>[   12.180000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
<5>[   15.800000] random: nonblocking pool is initialized
<5>[   19.810000] jffs2: notice: (1272) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
<6>[   23.410000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[   23.430000] device eth0.1 entered promiscuous mode
<6>[   23.430000] device eth0 entered promiscuous mode
<6>[   23.450000] IPv6: ADDRCONF(NETDEV_UP): br-mgmt: link is not ready
<6>[   23.490000] device eth0.3 entered promiscuous mode
<6>[   23.530000] IPv6: ADDRCONF(NETDEV_UP): br-wiredtests: link is not ready
<6>[   23.540000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
<6>[   24.540000] eth0: link up (1000Mbps/Full duplex)
<6>[   24.540000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>[   24.570000] br-mgmt: port 1(eth0.1) entered forwarding state
<6>[   24.570000] br-mgmt: port 1(eth0.1) entered forwarding state
<6>[   24.580000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
<6>[   24.580000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[   24.590000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[   24.600000] IPv6: ADDRCONF(NETDEV_CHANGE): br-mgmt: link becomes ready
<6>[   24.610000] IPv6: ADDRCONF(NETDEV_CHANGE): br-wiredtests: link becomes ready
<6>[   25.370000] IPv6: ADDRCONF(NETDEV_UP): wbm1: link is not ready
<6>[   25.420000] wbm1: Created IBSS using preconfigured BSSID 02:ca:ff:ee:ba:be
<6>[   25.430000] wbm1: Creating new IBSS network, BSSID 02:ca:ff:ee:ba:be
<6>[   25.470000] IPv6: ADDRCONF(NETDEV_UP): mgmt0: link is not ready
<6>[   25.810000] IPv6: ADDRCONF(NETDEV_CHANGE): wbm1: link becomes ready
<6>[   25.820000] IPv6: ADDRCONF(NETDEV_CHANGE): mgmt0: link becomes ready
<6>[   26.100000] batman_adv: bat0: Adding interface: mgmt0
<6>[   26.100000] batman_adv: bat0: Interface activated: mgmt0
<6>[   26.110000] 8021q: adding VLAN 0 to HW filter on device bat0
<6>[   26.110000] device bat0 entered promiscuous mode
<6>[   26.120000] br-mgmt: port 2(bat0) entered forwarding state
<6>[   26.120000] br-mgmt: port 2(bat0) entered forwarding state
<6>[   26.570000] br-mgmt: port 1(eth0.1) entered forwarding state
<6>[   26.590000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[   27.090000] batman_adv: bat0: distributed_arp_table: Changing from: enabled to: disabled
<6>[   27.110000] batman_adv: bat0: Changing gw mode from: off to: client
<6>[   27.110000] batman_adv: bat0: orig_interval: Changing from: 1000 to: 5000
<6>[   28.120000] br-mgmt: port 2(bat0) entered forwarding state
<6>[ 1682.510000] br-wiredtests: port 1(eth0.3) entered disabled state
<6>[ 1682.520000] device eth0.3 left promiscuous mode
<6>[ 1682.520000] br-wiredtests: port 1(eth0.3) entered disabled state
<6>[ 1682.620000] IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
<6>[ 1682.660000] device eth0.3 entered promiscuous mode
<6>[ 1682.700000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[ 1682.700000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[ 1683.100000] batman_adv: bat1: Adding interface: wbm1
<6>[ 1683.100000] batman_adv: bat1: Interface activated: wbm1
<6>[ 1683.110000] 8021q: adding VLAN 0 to HW filter on device bat1
<6>[ 1683.130000] batman_adv: bat1: Adding interface: lan_12
<6>[ 1683.130000] batman_adv: bat1: The MTU of interface lan_12 is too small (1496) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
<6>[ 1683.160000] batman_adv: bat1: Interface activated: lan_12
<6>[ 1683.260000] device bat1 entered promiscuous mode
<6>[ 1683.260000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 1683.270000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 1684.030000] batman_adv: bat1: distributed_arp_table: Changing from: enabled to: disabled
<6>[ 1684.700000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[ 1685.270000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 1981.530000] device bat1 left promiscuous mode
<6>[ 1981.540000] br-wiredtests: port 2(bat1) entered disabled state
<6>[ 1981.550000] br-wiredtests: port 1(eth0.3) entered disabled state
<6>[ 1981.570000] device eth0.3 left promiscuous mode
<6>[ 1981.570000] br-wiredtests: port 1(eth0.3) entered disabled state
<6>[ 1981.590000] IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
<4>[ 1981.600000] batman_adv: The newly added mac address (64:70:02:3e:9e:7c) already exists on: lan_12
<4>[ 1981.610000] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
<6>[ 1981.620000] device eth0.3 entered promiscuous mode
<6>[ 1981.650000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[ 1981.650000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[ 1981.700000] 8021q: adding VLAN 0 to HW filter on device bat1
<4>[ 1981.740000] batman_adv: The newly added mac address (64:70:02:3e:9e:7c) already exists on: lan_12
<4>[ 1981.750000] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
<6>[ 1981.940000] batman_adv: bat1: Interface deactivated: wbm1
<6>[ 1981.940000] batman_adv: bat1: Removing interface: wbm1
<6>[ 1982.000000] batman_adv: bat1: Interface deactivated: lan_12
<6>[ 1982.010000] batman_adv: bat1: Removing interface: lan_12
<6>[ 1983.650000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[ 2261.000000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 1 is up
<6>[ 3719.000000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 1 is down
<6>[ 3735.000000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 1 is up
<6>[ 6286.160000] br-wiredtests: port 1(eth0.3) entered disabled state
<6>[ 6286.170000] device eth0.3 left promiscuous mode
<6>[ 6286.170000] br-wiredtests: port 1(eth0.3) entered disabled state
<6>[ 6286.190000] IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
<6>[ 6286.200000] device eth0.3 entered promiscuous mode
<6>[ 6286.220000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[ 6286.230000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[ 6286.510000] batman_adv: bat1: Adding interface: wbm1
<6>[ 6286.510000] batman_adv: bat1: Interface activated: wbm1
<6>[ 6286.520000] 8021q: adding VLAN 0 to HW filter on device bat1
<6>[ 6286.600000] batman_adv: bat1: Adding interface: lan_12
<6>[ 6286.610000] batman_adv: bat1: The MTU of interface lan_12 is too small (1496) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
<6>[ 6286.630000] batman_adv: bat1: Interface activated: lan_12
<6>[ 6286.650000] device bat1 entered promiscuous mode
<6>[ 6286.660000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 6286.660000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 6287.640000] batman_adv: bat1: distributed_arp_table: Changing from: enabled to: disabled
<6>[ 6288.230000] br-wiredtests: port 1(eth0.3) entered forwarding state
<6>[ 6288.660000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 7011.790000] batman_adv: bat1: Interface deactivated: wbm1
<6>[ 7011.790000] batman_adv: bat1: Removing interface: wbm1
<4>[ 7011.800000] br-wiredtests: received packet on bat1 with own address as source address
<6>[ 7013.790000] batman_adv: bat1: Interface deactivated: lan_12
<6>[ 7013.790000] batman_adv: bat1: Removing interface: lan_12
<6>[ 7013.800000] br-wiredtests: port 2(bat1) entered disabled state
<6>[ 7013.810000] device bat1 left promiscuous mode
<6>[ 7013.820000] br-wiredtests: port 2(bat1) entered disabled state
<6>[ 7025.310000] batman_adv: bat1: Adding interface: wbm1
<6>[ 7025.320000] batman_adv: bat1: Interface activated: wbm1
<6>[ 7025.320000] 8021q: adding VLAN 0 to HW filter on device bat1
<6>[ 7025.350000] device bat1 entered promiscuous mode
<6>[ 7025.350000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 7025.360000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 7025.510000] batman_adv: bat1: distributed_arp_table: Changing from: enabled to: disabled
<6>[ 7027.360000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 7147.610000] batman_adv: bat1: Interface deactivated: wbm1
<6>[ 7147.610000] batman_adv: bat1: Removing interface: wbm1
<6>[ 7147.620000] br-wiredtests: port 2(bat1) entered disabled state
<6>[ 7147.630000] device bat1 left promiscuous mode
<6>[ 7147.630000] br-wiredtests: port 2(bat1) entered disabled state
<6>[ 7151.000000] batman_adv: bat1: Adding interface: lan_12
<6>[ 7151.000000] batman_adv: bat1: The MTU of interface lan_12 is too small (1496) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
<6>[ 7151.030000] batman_adv: bat1: Interface activated: lan_12
<6>[ 7151.030000] 8021q: adding VLAN 0 to HW filter on device bat1
<6>[ 7151.090000] device bat1 entered promiscuous mode
<6>[ 7151.090000] br-wiredtests: port 2(bat1) entered forwarding state
<6>[ 7151.100000] br-wiredtests: port 2(bat1) entered forwarding state
<4>[ 7151.100000] br-wiredtests: received packet on bat1 with own address as source address
<6>[ 7151.220000] batman_adv: bat1: distributed_arp_table: Changing from: enabled to: disabled
<6>[ 7153.100000] br-wiredtests: port 2(bat1) entered forwarding state
<4>[ 7161.020000] br-wiredtests: received packet on bat1 with own address as source address
<4>[ 7171.040000] br-wiredtests: received packet on bat1 with own address as source address
<4>[ 7181.060000] br-wiredtests: received packet on bat1 with own address as source address
<6>[ 7187.400000] batman_adv: bat1: Adding interface: wbm1
<6>[ 7187.410000] batman_adv: bat1: Interface activated: wbm1
<4>[ 7191.080000] br-wiredtests: received packet on bat1 with own address as source address
<4>[ 7201.100000] br-wiredtests: received packet on bat1 with own address as source address
<4>[ 7211.120000] br-wiredtests: received packet on bat1 with own address as source address
<4>[ 7221.140000] br-wiredtests: received packet on bat1 with own address as source address
<1>[ 7224.990000] CPU 0 Unable to handle kernel paging request at virtual address 01020100, epc == 872d000c, ra == 872d0004
<4>[ 7225.000000] Oops[#1]:
<4>[ 7225.000000] CPU: 0 PID: 13762 Comm: kworker/u2:1 Not tainted 3.18.29 #10
<4>[ 7225.000000] Workqueue: bat_events batadv_orig_node_put [batman_adv]
<4>[ 7225.000000] task: 879aa6c0 ti: 861e0000 task.ti: 861e0000
<4>[ 7225.000000] $ 0   : 00000000 00000000 86b76c80 01020100
<4>[ 7225.000000] $ 4   : 00000034 00000400 1100dc00 ffff00fe
<4>[ 7225.000000] $ 8   : 861e1fe0 0000dc00 00000015 000c002a
<4>[ 7225.000000] $12   : 00000001 0000000c 00000000 00000005
<4>[ 7225.000000] $16   : 8628e400 86b76500 86b20440 0000025a
<4>[ 7225.000000] $20   : 86278880 872e0000 00000000 00000034
<4>[ 7225.000000] $24   : 00000010 8006df08                  
<4>[ 7225.000000] $28   : 861e0000 861e1df0 00200200 872d0004
<4>[ 7225.000000] Hi    : 00000009
<4>[ 7225.000000] Lo    : 00004e20
<4>[ 7225.000000] epc   : 872d000c batadv_orig_node_put+0x250/0x4a4 [batman_adv]
<4>[ 7225.000000]     Not tainted
<4>[ 7225.000000] ra    : 872d0004 batadv_orig_node_put+0x248/0x4a4 [batman_adv]
<4>[ 7225.000000] Status: 1100dc03	KERNEL EXL IE 
<4>[ 7225.000000] Cause : 8080000c
<4>[ 7225.000000] BadVA : 01020100
<4>[ 7225.000000] PrId  : 0001974c (MIPS 74Kc)
<4>[ 7225.000000] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat batman_adv ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_id xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack iptable_raw iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbdev libcrc32c ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables dummy ip6_tunnel tunnel6 tun vfat fat ipv6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 crc32c_generic crypto_hash
<4>[ 7225.000000] Process kworker/u2:1 (pid: 13762, threadinfo=861e0000, task=879aa6c0, tls=00000000)
<4>[ 7225.000000] Stack : 86900258 800993c0 86900240 860db710 86900240 87313c1c 00000000 00000000
<4>[ 7225.000000] 	  004038c0 86b76c80 86b20504 86b20504 87804a00 87188900 00000000 00000000
<4>[ 7225.000000] 	  87804a10 87804a00 00000088 872d022c 879aa6c0 80357590 00000000 8009c1c4
<4>[ 7225.000000] 	  86906380 86906380 86b20504 80091d30 80357590 80066648 00000000 8006df08
<4>[ 7225.000000] 	  861e1e78 87188e00 86906380 86906380 87804a00 86906398 80305420 00000001
<4>[ 7225.000000] 	  ...
<4>[ 7225.000000] Call Trace:
<4>[ 7225.000000] [<872d000c>] batadv_orig_node_put+0x250/0x4a4 [batman_adv]
<4>[ 7225.000000] [<872d0004>] batadv_orig_node_put+0x248/0x4a4 [batman_adv]
<4>[ 7225.000000] 
<4>[ 7225.000000] 
<4>[ 7225.000000] Code: 02e02021  8e220000  8e230004 <10400002> ac620000  ac430004  ae3e0004  0dcb3c95  02202021 
<4>[ 7225.250000] ---[ end trace 3c49293b9d62884b ]---

===================================
Time: 1462523738.526930

             reply	other threads:[~2016-05-06  8:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-06  8:50 Linus Lüssing [this message]
2016-05-06 11:21 ` [B.A.T.M.A.N.] Kernel panic by BATMAN_V @WBMv9 Marek Lindner
2016-05-06 19:00   ` Antonio Quartulli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160506085016.GA2811@otheros \
    --to=linus.luessing@c0d3.blue \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.