From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: Hemant Agrawal <hemant.agrawal@nxp.com>
Cc: <dev@dpdk.org>, <jianbo.liu@linaro.org>
Subject: Re: [PATCH] mk: Introduce NXP dpaa2 architecture based on armv8-a
Date: Mon, 9 May 2016 14:36:22 +0530 [thread overview]
Message-ID: <20160509090621.GA4631@localhost.localdomain> (raw)
In-Reply-To: <1462801702-30918-1-git-send-email-hemant.agrawal@nxp.com>
On Mon, May 09, 2016 at 07:18:22PM +0530, Hemant Agrawal wrote:
> This patch introduces dpaa2 machine target to address difference
> in cpu parameter, number of core to 8 and no numa support
> w.r.t default armv8-a machine
>
> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
> ---
> config/defconfig_arm64-dpaa2-linuxapp-gcc | 44 +++++++++++++++++++++++
> mk/machine/dpaa2/rte.vars.mk | 60 +++++++++++++++++++++++++++++++
> mk/rte.module.mk | 5 +++
> 3 files changed, 109 insertions(+)
> create mode 100644 config/defconfig_arm64-dpaa2-linuxapp-gcc
> create mode 100644 mk/machine/dpaa2/rte.vars.mk
>
> diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
> new file mode 100644
> index 0000000..80bda26
> --- /dev/null
> +++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
> @@ -0,0 +1,44 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016 Freescale Semiconductor, Inc. All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Freescale Semiconductor nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +#
> +
> +#include "defconfig_arm64-armv8a-linuxapp-gcc"
> +
> +# NXP (Freescale) - Soc Architecture with WRIOP and QBMAN support
> +CONFIG_RTE_MACHINE="dpaa2"
> +CONFIG_RTE_ARCH_ARM_TUNE="cortex-a57+fp+simd"
> +
> +#
> +# Compile Environment Abstraction Layer
> +#
> +CONFIG_RTE_MAX_LCORE=8
> +CONFIG_RTE_MAX_NUMA_NODES=1
> +CONFIG_RTE_EAL_IGB_UIO=n
I think it makes sense to move this option to generic arm64 config
as upstream arm64 kernel does not have support for sysfs based PCI mmap
resource file,(/sys/bus/pci/devices/B:D:F/resource[_wc]X) need for
CONFIG_RTE_EAL_IGB_UIO to work) and use VFIO for all cases.
Any objections?
> +CONFIG_RTE_EAL_VFIO=y
> diff --git a/mk/machine/dpaa2/rte.vars.mk b/mk/machine/dpaa2/rte.vars.mk
> new file mode 100644
> index 0000000..8541633
> --- /dev/null
> +++ b/mk/machine/dpaa2/rte.vars.mk
> @@ -0,0 +1,60 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016 Freescale Semiconductor, Inc. All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Freescale Semiconductor nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +#
> +# machine:
> +#
> +# - can define ARCH variable (overridden by cmdline value)
> +# - can define CROSS variable (overridden by cmdline value)
> +# - define MACHINE_CFLAGS variable (overridden by cmdline value)
> +# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
> +# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
> +# - can define CPU_CFLAGS variable (overridden by cmdline value) that
> +# overrides the one defined in arch.
> +# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
> +# overrides the one defined in arch.
> +# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
> +# overrides the one defined in arch.
> +# - may override any previously defined variable
> +#
> +
> +# ARCH =
> +# CROSS =
> +# MACHINE_CFLAGS =
> +# MACHINE_LDFLAGS =
> +# MACHINE_ASFLAGS =
> +# CPU_CFLAGS =
> +# CPU_LDFLAGS =
> +# CPU_ASFLAGS =
> +MACHINE_CFLAGS += -march=armv8-a
> +
> +ifdef CONFIG_RTE_ARCH_ARM_TUNE
> +MACHINE_CFLAGS += -mcpu=$(CONFIG_RTE_ARCH_ARM_TUNE)
> +endif
> diff --git a/mk/rte.module.mk b/mk/rte.module.mk
> index 53ed4fe..09bf51b 100644
> --- a/mk/rte.module.mk
> +++ b/mk/rte.module.mk
> @@ -29,6 +29,11 @@
> # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>
> +#### Linaro toolchain usages arm64 instread of aarch64 in kernel
> +ifeq ($(ARCH), aarch64)
> +ARCH = arm64
> +endif
> +
> ##### if sourced from kernel Kbuild system
> ifneq ($(KERNELRELEASE),)
> override EXTRA_CFLAGS = $(MODULE_CFLAGS) $(EXTRA_KERNEL_CFLAGS)
> --
> 1.9.1
>
next prev parent reply other threads:[~2016-05-09 9:06 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-09 13:48 [PATCH] mk: Introduce NXP dpaa2 architecture based on armv8-a Hemant Agrawal
2016-05-09 8:20 ` Santosh Shukla
2016-05-09 8:39 ` Thomas Monjalon
2016-05-09 9:09 ` Hemant Agrawal
2016-05-09 9:06 ` Jerin Jacob [this message]
2016-05-09 9:13 ` Santosh Shukla
2016-05-09 9:16 ` Hemant Agrawal
2016-05-09 11:02 ` Jianbo Liu
2016-05-09 12:11 ` Jerin Jacob
2016-05-09 15:22 ` Jianbo Liu
2016-05-09 16:17 ` Jerin Jacob
2016-05-10 2:10 ` Jianbo Liu
2016-05-10 5:26 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160509090621.GA4631@localhost.localdomain \
--to=jerin.jacob@caviumnetworks.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=jianbo.liu@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.