From: Denys Dmytriyenko <denys@ti.com>
To: Sam Nelson <sam.nelson@ti.com>
Cc: meta-ti@yoctoproject.org
Subject: Re: [PATCH] ti-ipc-rtos: Update to include examples and documentation with the package
Date: Fri, 13 May 2016 14:56:52 -0400 [thread overview]
Message-ID: <20160513185652.GB16188@edge> (raw)
In-Reply-To: <1462989639-23037-1-git-send-email-sam.nelson@ti.com>
Sam,
Is this v2? You didn't specify changes since v1, so I would have to dig out
the previous submission and check that past comments were addressed.
Jake,
Do you have any comments here?
On Wed, May 11, 2016 at 02:00:39PM -0400, Sam Nelson wrote:
> Updated to new version 3.42.01.03
> Added procedures and source urls for adding examples and documentation
> into src package.
> Added dependency on doxygen for document creation
> Added big endian c66 targets
> Updated uniform formatting
>
> Signed-off-by: Sam Nelson <sam.nelson@ti.com>
> ---
> recipes-ti/ipc/ti-ipc-rtos_git.bb | 119 ++++++++++++++++++++++++++++++++------
> recipes-ti/ipc/ti-ipc.inc | 6 +-
> 2 files changed, 104 insertions(+), 21 deletions(-)
>
> diff --git a/recipes-ti/ipc/ti-ipc-rtos_git.bb b/recipes-ti/ipc/ti-ipc-rtos_git.bb
> index 4c0fc74..8fb448f 100644
> --- a/recipes-ti/ipc/ti-ipc-rtos_git.bb
> +++ b/recipes-ti/ipc/ti-ipc-rtos_git.bb
> @@ -2,9 +2,44 @@ require recipes-ti/includes/ti-paths.inc
> require recipes-ti/includes/ti-staging.inc
> require ti-ipc.inc
>
> -PR = "${INC_PR}.4"
> +TI_IPC_EXAMPLES_GIT_URI = "git://git.ti.com/ipc/ipc-examples.git"
> +TI_IPC_EXAMPLES_DEST_SUFFIX = "git/ipc-examples"
> +TI_IPC_EXAMPLES_GIT_PROTOCOL = "git"
> +TI_IPC_EXAMPLES_GIT_BRANCH = "master"
> +TI_IPC_EXAMPLES_NAME = "ipc-examples"
>
> -DEPENDS = "ti-xdctools ti-sysbios"
> +SRC_URI += "${TI_IPC_EXAMPLES_GIT_URI};\
> +destsuffix=${TI_IPC_EXAMPLES_DEST_SUFFIX};\
> +protocol=${TI_IPC_EXAMPLES_GIT_PROTOCOL};\
> +branch=${TI_IPC_EXAMPLES_GIT_BRANCH};\
> +name=${TI_IPC_EXAMPLES_NAME}"
> +
> +TI_IPC_METADATA_GIT_URI = "git://git.ti.com/ipc/ipc-metadata.git"
> +TI_IPC_METADATA_DEST_SUFFIX = "git/ipc-metadata"
> +TI_IPC_METADATA_GIT_PROTOCOL = "git"
> +TI_IPC_METADATA_GIT_BRANCH = "master"
> +TI_IPC_METADATA_NAME = "ipc-metadata"
> +
> +SRC_URI += "${TI_IPC_METADATA_GIT_URI};\
> +destsuffix=${TI_IPC_METADATA_DEST_SUFFIX};\
> +protocol=${TI_IPC_METADATA_GIT_PROTOCOL};\
> +branch=${TI_IPC_METADATA_GIT_BRANCH};\
> +name=${TI_IPC_METADATA_NAME}"
> +
> +# Corresponds to tag: 3.42.01.03
> +SRCREV_ipc-examples = "bd4f28bd46467553e6610629ff13b4b5b3ba3af0"
> +
> +# Corresponds to tag: 3.42.01.03
> +SRCREV_ipc-metadata = "4d01fe4a7c41d2ce76a62b4325e66753d59b298c"
> +
> +SRCREV_FORMAT = "ipc-metadata_ipc-examples"
> +
> +S_ipc-examples = "${WORKDIR}/git/ipc-examples"
> +S_ipc-metadata = "${WORKDIR}/git/ipc-metadata"
> +
> +PR = "${INC_PR}.0"
> +
> +DEPENDS = "ti-xdctools ti-sysbios doxygen-native"
> DEPENDS_append_keystone = " ti-cgt6x-native \
> gcc-arm-none-eabi-native \
> "
> @@ -12,6 +47,8 @@ DEPENDS_append_omap-a15 = " ti-cgt6x-native \
> ti-ccsv6-native \
> gcc-arm-none-eabi-native \
> "
> +DEPENDS_append_c66x = " ti-cgt6x-native \
> +"
>
> PACKAGES =+ "${PN}-fw"
> FILES_${PN}-fw = "${base_libdir}/firmware/*"
> @@ -26,6 +63,7 @@ IPC_TARGETS = ""
> IPC_TARGETS_omap-a15 = "\
> gnu.targets.arm.A15F="${GCC_ARM_NONE_TOOLCHAIN}" \
> ti.targets.elf.C66="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x" \
> + ti.targets.elf.C66_big_endian="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x" \
> ti.targets.arm.elf.M4="${M4_TOOLCHAIN_INSTALL_DIR}" \
> ti.targets.arm.elf.M4F="${M4_TOOLCHAIN_INSTALL_DIR}" \
> "
> @@ -33,18 +71,66 @@ IPC_TARGETS_omap-a15 = "\
> IPC_TARGETS_keystone = " \
> gnu.targets.arm.A15F="${GCC_ARM_NONE_TOOLCHAIN}" \
> ti.targets.elf.C66="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x" \
> + ti.targets.elf.C66_big_endian="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x" \
> +"
> +
> +IPC_TARGETS_c66x = " \
> + ti.targets.elf.C66="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x" \
> + ti.targets.elf.C66_big_endian="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x" \
> "
>
> EXTRA_OEMAKE = "\
> PLATFORM=${PLATFORM} \
> XDC_INSTALL_DIR="${XDC_INSTALL_DIR}" \
> BIOS_INSTALL_DIR="${SYSBIOS_INSTALL_DIR}" \
> - ${IPC_TARGETS} -f ipc-bios.mak\
> + ${IPC_TARGETS} \
> "
>
> +RELEASE_TYPE = "GA"
> +RELEASE_SUFFIX = ""
> +
> +SRCIPK_SRC_DIR = "${D}${IPC_INSTALL_DIR_RECIPE}"
> +SRCIPK_INSTALL_DIR = "ipc_${@'${PV}'.replace('.', '_')}${RELEASE_SUFFIX}"
> +
> do_compile() {
> - oe_runmake clean
> - oe_runmake all
> + oe_runmake -f ipc-bios.mak clean
> + oe_runmake -f ipc-bios.mak release
> +
> + cd ${S_ipc-metadata}
> + oe_runmake .all-files IPC_INSTALL_DIR="${S}" \
> + BUILD_HOST_OS="linux" \
> + RELEASE_TYPE="${RELEASE_TYPE}"
> +
> + cd ${S_ipc-examples}/src
> + oe_runmake .examples \
> + IPCTOOLS="${S_ipc-metadata}/src/etc"
> +
> + if [ "${PLATFORM}" != "UNKNOWN" ]; then
> + oe_runmake extract HOSTOS="bios" IPC_INSTALL_DIR="${S}"
> + oe_runmake extract HOSTOS="linux" IPC_INSTALL_DIR="${S}"
> +
> + if [ ! -z ${ALT_PLATFORM} ]; then
> + oe_runmake extract PLATFORM=${ALT_PLATFORM} HOSTOS="bios" IPC_INSTALL_DIR="${S}"
> + oe_runmake extract PLATFORM=${ALT_PLATFORM} HOSTOS="linux" IPC_INSTALL_DIR="${S}"
> + fi
> + fi
> +
> + IPC_VERSION=`echo ${PV}${RELEASE_SUFFIX} | sed -e 's|\.|_|g'`
> + # Copy docs and other meta files
> + install -d ${D}${IPC_INSTALL_DIR_RECIPE}
> + cp -pPrf ${S_ipc-metadata}/exports/ipc_${IPC_VERSION}/* -d ${D}${IPC_INSTALL_DIR_RECIPE}
> +
> + # Copy example folders corresponding to the platforms
> + if [ "${PLATFORM}" != "UNKNOWN" ]; then
> + install -d ${D}${IPC_INSTALL_DIR_RECIPE}/examples
> + cp -pPf ${S_ipc-examples}/src/examples/*.* ${D}${IPC_INSTALL_DIR_RECIPE}/examples/
> + cp -pPf ${S_ipc-examples}/src/examples/makefile ${D}${IPC_INSTALL_DIR_RECIPE}/examples/
> + cp -pPrf ${S_ipc-examples}/src/examples/${PLATFORM}* ${D}${IPC_INSTALL_DIR_RECIPE}/examples/
> + if [ ! -z ${ALT_PLATFORM} ]; then
> + cp -pPrf ${S_ipc-examples}/src/examples/${ALT_PLATFORM}* ${D}${IPC_INSTALL_DIR_RECIPE}/examples/
> + fi
> + find ${D}${IPC_INSTALL_DIR_RECIPE}/examples/ -name "*zip" -type f | xargs -I {} rm {}
> + fi
> }
>
> do_compile_append() {
> @@ -52,25 +138,22 @@ do_compile_append() {
> }
>
> do_install() {
> - install -d ${D}${IPC_INSTALL_DIR_RECIPE}
> - cp -pPrf ${S}/* ${D}${IPC_INSTALL_DIR_RECIPE}
> -
> - install -d ${D}${base_libdir}/firmware/ipc
> - cp -pPrf ${S}/packages/ti/ipc/tests/bin/* ${D}${base_libdir}/firmware/ipc
> + install -d ${D}${base_libdir}/firmware/ipc
> + cp -pPrf ${S}/packages/ti/ipc/tests/bin/* ${D}${base_libdir}/firmware/ipc
> }
>
> ALTERNATIVE_PRIORITY = "5"
>
> pkg_postinst_${PN}-fw_omap-a15 () {
> - update-alternatives --install /lib/firmware/dra7-dsp1-fw.xe66 dra7-dsp1-fw.xe66 ipc/ti_platforms_evmDRA7XX_dsp1/test_omx_dsp1_vayu.xe66 ${ALTERNATIVE_PRIORITY}
> - update-alternatives --install /lib/firmware/dra7-dsp2-fw.xe66 dra7-dsp2-fw.xe66 ipc/ti_platforms_evmDRA7XX_dsp2/test_omx_dsp2_vayu.xe66 ${ALTERNATIVE_PRIORITY}
> - update-alternatives --install /lib/firmware/dra7-ipu1-fw.xem4 dra7-ipu1-fw.xem4 ipc/ti_platforms_evmDRA7XX_ipu1/test_omx_ipu1_vayu.xem4 ${ALTERNATIVE_PRIORITY}
> - update-alternatives --install /lib/firmware/dra7-ipu2-fw.xem4 dra7-ipu2-fw.xem4 ipc/ti_platforms_evmDRA7XX_ipu2/test_omx_ipu2_vayu.xem4 ${ALTERNATIVE_PRIORITY}
> + update-alternatives --install /lib/firmware/dra7-dsp1-fw.xe66 dra7-dsp1-fw.xe66 ipc/ti_platforms_evmDRA7XX_dsp1/test_omx_dsp1_vayu.xe66 ${ALTERNATIVE_PRIORITY}
> + update-alternatives --install /lib/firmware/dra7-dsp2-fw.xe66 dra7-dsp2-fw.xe66 ipc/ti_platforms_evmDRA7XX_dsp2/test_omx_dsp2_vayu.xe66 ${ALTERNATIVE_PRIORITY}
> + update-alternatives --install /lib/firmware/dra7-ipu1-fw.xem4 dra7-ipu1-fw.xem4 ipc/ti_platforms_evmDRA7XX_ipu1/test_omx_ipu1_vayu.xem4 ${ALTERNATIVE_PRIORITY}
> + update-alternatives --install /lib/firmware/dra7-ipu2-fw.xem4 dra7-ipu2-fw.xem4 ipc/ti_platforms_evmDRA7XX_ipu2/test_omx_ipu2_vayu.xem4 ${ALTERNATIVE_PRIORITY}
> }
>
> pkg_postrm_${PN}-fw_omap-a15 () {
> - update-alternatives --remove dra7-dsp1-fw.xe66 ipc/ti_platforms_evmDRA7XX_dsp1/test_omx_dsp1_vayu.xe66
> - update-alternatives --remove dra7-dsp2-fw.xe66 ipc/ti_platforms_evmDRA7XX_dsp2/test_omx_dsp2_vayu.xe66
> - update-alternatives --remove dra7-ipu1-fw.xem4 ipc/ti_platforms_evmDRA7XX_ipu1/test_omx_ipu1_vayu.xem4
> - update-alternatives --remove dra7-ipu2-fw.xem4 ipc/ti_platforms_evmDRA7XX_ipu2/test_omx_ipu2_vayu.xem4
> + update-alternatives --remove dra7-dsp1-fw.xe66 ipc/ti_platforms_evmDRA7XX_dsp1/test_omx_dsp1_vayu.xe66
> + update-alternatives --remove dra7-dsp2-fw.xe66 ipc/ti_platforms_evmDRA7XX_dsp2/test_omx_dsp2_vayu.xe66
> + update-alternatives --remove dra7-ipu1-fw.xem4 ipc/ti_platforms_evmDRA7XX_ipu1/test_omx_ipu1_vayu.xem4
> + update-alternatives --remove dra7-ipu2-fw.xem4 ipc/ti_platforms_evmDRA7XX_ipu2/test_omx_ipu2_vayu.xem4
> }
> diff --git a/recipes-ti/ipc/ti-ipc.inc b/recipes-ti/ipc/ti-ipc.inc
> index 69127aa..9c5dfed 100644
> --- a/recipes-ti/ipc/ti-ipc.inc
> +++ b/recipes-ti/ipc/ti-ipc.inc
> @@ -8,15 +8,15 @@ TI_IPC_GIT_URI = "git://git.ti.com/ipc/ipcdev.git"
> TI_IPC_GIT_PROTOCOL = "git"
> TI_IPC_GIT_BRANCH = "3.42"
>
> -#Corresponds to 3.42.00.02
> -TI_IPC_SRCREV = "a520969994378fb2629d7dfc25f306c3a711b5bc"
> +#Corresponds to 3.42.01.03
> +TI_IPC_SRCREV = "dc6c5082f478225b7fbce4216173e6c5b36100b4"
>
> BRANCH = "${TI_IPC_GIT_BRANCH}"
> SRC_URI = "${TI_IPC_GIT_URI};protocol=${TI_IPC_GIT_PROTOCOL};branch=${BRANCH}"
> SRCREV = "${TI_IPC_SRCREV}"
>
> S = "${WORKDIR}/git"
> -PV = "3.42.00.02"
> +PV = "3.42.01.03"
> INC_PR = "r0"
>
> PACKAGE_ARCH = "${MACHINE_ARCH}"
> --
> 1.9.1
>
> --
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
next prev parent reply other threads:[~2016-05-13 18:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 18:00 [PATCH] ti-ipc-rtos: Update to include examples and documentation with the package Sam Nelson
2016-05-13 18:56 ` Denys Dmytriyenko [this message]
2016-05-13 19:12 ` Stiffler, Jacob
2016-05-17 18:39 ` Nelson, Sam
2016-05-17 18:56 ` Denys Dmytriyenko
2016-05-17 21:32 ` Nelson, Sam
2016-05-18 2:41 ` Denys Dmytriyenko
2016-05-18 12:41 ` Nelson, Sam
2016-05-13 20:55 ` Nelson, Sam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160513185652.GB16188@edge \
--to=denys@ti.com \
--cc=meta-ti@yoctoproject.org \
--cc=sam.nelson@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.