From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Vignesh R <vigneshr@ti.com>
Cc: Lee Jones <lee.jones@linaro.org>,
Grygorii Strashko <grygorii.strashko@ti.com>,
Dave Gerlach <d-gerlach@ti.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] Input: ti_am335x_tsc - Ack pending IRQs at probe and before suspend
Date: Mon, 16 May 2016 12:44:57 -0700 [thread overview]
Message-ID: <20160516194457.GE12752@dtor-ws> (raw)
In-Reply-To: <1463397984-15766-4-git-send-email-vigneshr@ti.com>
On Mon, May 16, 2016 at 04:56:24PM +0530, Vignesh R wrote:
> From: Grygorii Strashko <grygorii.strashko@ti.com>
>
> It is seen that just enabling the TSC module triggers a HW_PEN IRQ
> without any interaction with touchscreen by user. This results in first
> suspend/resume sequence to fail as system immediately wakes up from
> suspend as soon as HW_PEN IRQ is enabled in suspend handler. due to the
> pending IRQ. Therefore clear all IRQs at probe and also in suspend
> callback for sanity.
What if user touches the screen while device's suspend routine is
executing?
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
> drivers/input/touchscreen/ti_am335x_tsc.c | 2 ++
> include/linux/mfd/ti_am335x_tscadc.h | 1 +
> 2 files changed, 3 insertions(+)
>
> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
> index 4683ed18b9f8..d2c55b5730e6 100644
> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
> @@ -441,6 +441,7 @@ static int titsc_probe(struct platform_device *pdev)
> dev_err(&pdev->dev, "irq wake enable failed.\n");
> }
>
> + titsc_writel(ts_dev, REG_IRQSTATUS, IRQENB_MASK);
> titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
> titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
> err = titsc_config_wires(ts_dev);
> @@ -506,6 +507,7 @@ static int __maybe_unused titsc_suspend(struct device *dev)
>
> tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
> if (device_may_wakeup(tscadc_dev->dev)) {
> + titsc_writel(ts_dev, REG_IRQSTATUS, IRQENB_MASK);
> idle = titsc_readl(ts_dev, REG_IRQENABLE);
> titsc_writel(ts_dev, REG_IRQENABLE,
> (idle | IRQENB_HW_PEN));
> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
> index 1fd50dcfe47c..a7ca0f908ba8 100644
> --- a/include/linux/mfd/ti_am335x_tscadc.h
> +++ b/include/linux/mfd/ti_am335x_tscadc.h
> @@ -60,6 +60,7 @@
> #define IRQENB_FIFO1OVRRUN BIT(6)
> #define IRQENB_FIFO1UNDRFLW BIT(7)
> #define IRQENB_PENUP BIT(9)
> +#define IRQENB_MASK (0x7FF)
>
> /* Step Configuration */
> #define STEPCONFIG_MODE_MASK (3 << 0)
> --
> 2.8.2
>
--
Dmitry
next prev parent reply other threads:[~2016-05-16 19:45 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-16 11:26 [PATCH 0/3] AM335x: tsc: Fix suspended while touchscreen in use Vignesh R
2016-05-16 11:26 ` Vignesh R
2016-05-16 11:26 ` [PATCH 1/3] Input: ti_am335x_tsc - Mark IRQ as wakeup capable Vignesh R
2016-05-16 11:26 ` Vignesh R
2016-05-16 19:46 ` Dmitry Torokhov
2016-05-17 10:14 ` Vignesh R
2016-05-17 10:14 ` Vignesh R
2016-05-16 11:26 ` [PATCH 2/3] Input: ti_am335x_tsc - Prevent system suspend when TSC is in use Vignesh R
2016-05-16 11:26 ` Vignesh R
2016-05-16 11:26 ` [PATCH 3/3] Input: ti_am335x_tsc - Ack pending IRQs at probe and before suspend Vignesh R
2016-05-16 11:26 ` Vignesh R
2016-05-16 19:44 ` Dmitry Torokhov [this message]
2016-05-17 5:56 ` Lee Jones
2016-05-17 5:56 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160516194457.GE12752@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=d-gerlach@ti.com \
--cc=grygorii.strashko@ti.com \
--cc=lee.jones@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.