From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] dosfstools: security bump to version 4.0
Date: Tue, 24 May 2016 22:07:33 +0200 [thread overview]
Message-ID: <20160524200733.GD3621@free.fr> (raw)
In-Reply-To: <1463675290-22004-1-git-send-email-gustavo@zacarias.com.ar>
Gustavo, All,
On 2016-05-19 13:28 -0300, Gustavo Zacarias spake thusly:
> Fixes:
>
> CVE-2015-8872 - if the third to last entry was written on a FAT12
> filesystem with an odd number of clusters, the second to last entry
> would be corrupted. This corruption may also lead to invalid memory
> accesses when the corrupted entry becomes out of bounds and is used
> late.
>
> CVE-2016-4804 - the variable used for storing the FAT size (in bytes)
> was an unsigned int. Since the size in sectors read from the BPB was not
> sufficiently checked, this could end up being zero after multiplying it
> with the sector size while some offsets still stayed excessive.
> Ultimately it would cause segfaults when accessing FAT entries for which
> no memory was allocated.
>
> Converted package to autotools infra to match upstream.
>
> The install options are now removals, enabled compatibilty symlinks and
> exec-prefix set to / to match previous install names/locations.
>
> Accounted for optional udev usage.
>
> Dropped musl compatibility patch since it's upstream.
>
> Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
> ---
> .../0001-mkfs.fat-fix-incorrect-int-type.patch | 45 ----------------
> package/dosfstools/dosfstools.hash | 2 +-
> package/dosfstools/dosfstools.mk | 63 ++++++++--------------
> 3 files changed, 24 insertions(+), 86 deletions(-)
> delete mode 100644 package/dosfstools/0001-mkfs.fat-fix-incorrect-int-type.patch
>
> diff --git a/package/dosfstools/dosfstools.mk b/package/dosfstools/dosfstools.mk
> index b7f7d96..00fea6b 100644
> --- a/package/dosfstools/dosfstools.mk
> +++ b/package/dosfstools/dosfstools.mk
> @@ -4,65 +4,48 @@
> #
> ################################################################################
>
> -DOSFSTOOLS_VERSION = 3.0.28
> +DOSFSTOOLS_VERSION = 4.0
> DOSFSTOOLS_SOURCE = dosfstools-$(DOSFSTOOLS_VERSION).tar.xz
> DOSFSTOOLS_SITE = https://github.com/dosfstools/dosfstools/releases/download/v$(DOSFSTOOLS_VERSION)
> DOSFSTOOLS_LICENSE = GPLv3+
> DOSFSTOOLS_LICENSE_FILES = COPYING
> +DOSFSTOOLS_CONF_OPTS = --enable-compat-symlinks --exec-prefix=/
>
> # Avoid target dosfstools dependencies, no host-libiconv
> HOST_DOSFSTOOLS_DEPENDENCIES =
>
> -DOSFSTOOLS_CFLAGS = $(TARGET_CFLAGS) -D_GNU_SOURCE
> +ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
> +DOSFSTOOLS_CONF_OPTS += --with-udev
> +DOSFSTOOLS_DEPENDENCIES += udev
> +else
> +DOSFSTOOLS_CONF_OPTS += --without-udev
> +endif
>
> ifneq ($(BR2_ENABLE_LOCALE),y)
> +DOSFSTOOLS_CONF_OPTS += LIBS="-liconv"
> DOSFSTOOLS_DEPENDENCIES += libiconv
> -DOSFSTOOLS_LDLIBS += -liconv
> endif
>
> -define DOSFSTOOLS_BUILD_CMDS
> - $(MAKE) $(TARGET_CONFIGURE_OPTS) \
> - CFLAGS="$(DOSFSTOOLS_CFLAGS)" LDLIBS="$(DOSFSTOOLS_LDLIBS)" -C $(@D)
> -endef
> -
> -ifeq ($(BR2_PACKAGE_DOSFSTOOLS_FATLABEL),y)
> -define DOSFSTOOLS_INSTALL_FATLABEL
> - $(INSTALL) -D -m 755 $(@D)/fatlabel $(TARGET_DIR)/sbin/fatlabel
> - ln -sf fatlabel $(TARGET_DIR)/sbin/dosfslabel
> +ifeq ($(BR2_PACKAGE_DOSFSTOOLS_FATLABEL),)
> +define DOSFSTOOLS_REMOVE_FATLABEL
> + rm -f $(addprefix $(TARGET_DIR)/sbin/,dosfslabel fatlabel)
> endef
> +DOSFSTOOLS_POST_INSTALL_TARGET_HOOKS += DOSFSTOOLS_REMOVE_FATLABEL
> endif
>
> -ifeq ($(BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT),y)
> -define DOSFSTOOLS_INSTALL_FSCK_FAT
> - $(INSTALL) -D -m 755 $(@D)/fsck.fat $(TARGET_DIR)/sbin/fsck.fat
> - ln -fs fsck.fat $(TARGET_DIR)/sbin/dosfsck
> - ln -fs fsck.fat $(TARGET_DIR)/sbin/fsck.msdos
> - ln -fs fsck.fat $(TARGET_DIR)/sbin/fsck.vfat
> +ifeq ($(BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT),)
> +define DOSFSTOOLS_REMOVE_FSCK_FAT
> + rm -f $(addprefix $(TARGET_DIR)/sbin/,fsck.fat dosfsck fsck.msdos fsck.vfat)
> endef
> +DOSFSTOOLS_POST_INSTALL_TARGET_HOOKS += DOSFSTOOLS_REMOVE_FSCK_FAT
> endif
>
> -ifeq ($(BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT),y)
> -define DOSFSTOOLS_INSTALL_MKFS_FAT
> - $(INSTALL) -D -m 755 $(@D)/mkfs.fat $(TARGET_DIR)/sbin/mkfs.fat
> - ln -fs mkfs.fat $(TARGET_DIR)/sbin/mkdosfs
> - ln -fs mkfs.fat $(TARGET_DIR)/sbin/mkfs.msdos
> - ln -fs mkfs.fat $(TARGET_DIR)/sbin/mkfs.vfat
> +ifeq ($(BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT),)
> +define DOSFSTOOLS_REMOVE_MKFS_FAT
> + rm -f rm -f $(addprefix $(TARGET_DIR)/sbin/,mkfs.fat mkdosfs mkfs.msdos mkfs.vfat)
Double "rm -f rm -f".
Otherwise looks good...
Regards,
Yann E. MORIN.
> endef
> +DOSFSTOOLS_POST_INSTALL_TARGET_HOOKS += DOSFSTOOLS_REMOVE_MKFS_FAT
> endif
>
> -define DOSFSTOOLS_INSTALL_TARGET_CMDS
> - $(DOSFSTOOLS_INSTALL_FATLABEL)
> - $(DOSFSTOOLS_INSTALL_FSCK_FAT)
> - $(DOSFSTOOLS_INSTALL_MKFS_FAT)
> -endef
> -
> -define HOST_DOSFSTOOLS_BUILD_CMDS
> - $(MAKE) $(HOST_CONFIGURE_OPTS) -C $(@D)
> -endef
> -
> -define HOST_DOSFSTOOLS_INSTALL_CMDS
> - $(MAKE) -C $(@D) $(HOST_CONFIGURE_OPTS) PREFIX=$(HOST_DIR)/usr install
> -endef
> -
> -$(eval $(generic-package))
> -$(eval $(host-generic-package))
> +$(eval $(autotools-package))
> +$(eval $(host-autotools-package))
> --
> 2.7.3
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
prev parent reply other threads:[~2016-05-24 20:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-19 16:28 [Buildroot] [PATCH] dosfstools: security bump to version 4.0 Gustavo Zacarias
2016-05-24 20:07 ` Yann E. MORIN [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160524200733.GD3621@free.fr \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.