diff for duplicates of <20160530194340.GE4908@lukather> diff --git a/a/1.txt b/N1/1.txt index 82bc5fa..574a282 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,7 +1,7 @@ Hi, -On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly at gmail.com wrote: -> From: luoyi <luoyi.ly@gmail.com> +On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote: +> From: luoyi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn . > This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for @@ -11,7 +11,7 @@ On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly at gmail.com wrote: What is the difference between the M1+ and the M1? > -> Signed-off-by: Luo Yi <luoyi.ly@gmail.com> +> Signed-off-by: Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 270 +++++++++++++++++++++++ @@ -37,9 +37,9 @@ What is the difference between the M1+ and the M1? > +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts > @@ -0,0 +1,270 @@ > +/* -> + * Copyright 2016 Luo Yi <luoyi.ly@gmail.com> +> + * Copyright 2016 Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > + * -> + * Thanks to the original work by Hans de Goede <hdegoede@redhat.com> +> + * Thanks to the original work by Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -192,7 +192,7 @@ Please order your nodes alphabetically. > + phy-supply = <®_gmac_3v3>; > + status = "okay"; > + -> + phy1: ethernet-phy at 1 { +> + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > +}; @@ -202,7 +202,7 @@ Please order your nodes alphabetically. > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > + -> + axp209: pmic at 34 { +> + axp209: pmic@34 { > + compatible = "x-powers,axp209"; > + reg = <0x34>; > + interrupt-parent = <&nmi_intc>; @@ -240,7 +240,7 @@ Please order your nodes alphabetically. > + enable-sdio-wakeup; > + status = "okay"; > + -> + brcmf: bcrmf at 1 { +> + brcmf: bcrmf@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + interrupt-parent = <&pio>; @@ -256,42 +256,42 @@ Please order your nodes alphabetically. > +}; > + > +&pio { -> + gmac_power_pin_bananapi: gmac_power_pin at 0 { +> + gmac_power_pin_bananapi: gmac_power_pin@0 { > + allwinner,pins = "PH23"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + led_pins_bananapi: led_pins at 0 { +> + led_pins_bananapi: led_pins@0 { > + allwinner,pins = "PH24", "PG2"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + mmc0_cd_pin_bananapi: mmc0_cd_pin at 0 { +> + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { > + allwinner,pins = "PH10"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; > + }; > + -> + usb1_vbus_pin_bananapi: usb1_vbus_pin at 0 { +> + usb1_vbus_pin_bananapi: usb1_vbus_pin@0 { > + allwinner,pins = "PH0"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + usb2_vbus_pin_bananapi: usb2_vbus_pin at 0 { +> + usb2_vbus_pin_bananapi: usb2_vbus_pin@0 { > + allwinner,pins = "PH1"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + vmmc3_pin_bananapi: vmmc3_pin at 0 { +> + vmmc3_pin_bananapi: vmmc3_pin@0 { > + allwinner,pins = "PH22"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -333,10 +333,3 @@ Maxime Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --------------- next part -------------- -A non-text attachment was scrubbed... -Name: signature.asc -Type: application/pgp-signature -Size: 819 bytes -Desc: not available -URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160530/da12d889/attachment.sig> diff --git a/a/content_digest b/N1/content_digest index 3c220af..afc1b83 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,14 +1,26 @@ "ref\020160530123013.11575-1-luoyi.ly@gmail.com\0" - "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0" - "Subject\0[PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board\0" + "ref\020160530123013.11575-1-luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "From\0Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Subject\0Re: [PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board\0" "Date\0Mon, 30 May 2016 21:43:40 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" - "\00:1\0" + "To\0luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "Cc\0robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" + pawel.moll-5wv7dgnIgG8@public.gmane.org + mark.rutland-5wv7dgnIgG8@public.gmane.org + ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org + galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org + linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org + wens-jdAy2FN1RRM@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org\0" + "\01:1\0" "b\0" "Hi,\n" "\n" - "On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly at gmail.com wrote:\n" - "> From: luoyi <luoyi.ly@gmail.com>\n" + "On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:\n" + "> From: luoyi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "> \n" "> Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn .\n" "> This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for\n" @@ -18,7 +30,7 @@ "What is the difference between the M1+ and the M1?\n" "\n" "> \n" - "> Signed-off-by: Luo Yi <luoyi.ly@gmail.com>\n" + "> Signed-off-by: Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "> ---\n" "> arch/arm/boot/dts/Makefile | 1 +\n" "> arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 270 +++++++++++++++++++++++\n" @@ -44,9 +56,9 @@ "> +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts\n" "> @@ -0,0 +1,270 @@\n" "> +/*\n" - "> + * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>\n" + "> + * Copyright 2016 Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "> + * \n" - "> + * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>\n" + "> + * Thanks to the original work by Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -199,7 +211,7 @@ "> +\tphy-supply = <®_gmac_3v3>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tphy1: ethernet-phy at 1 {\n" + "> +\tphy1: ethernet-phy@1 {\n" "> +\t\treg = <1>;\n" "> +\t};\n" "> +};\n" @@ -209,7 +221,7 @@ "> +\tpinctrl-0 = <&i2c0_pins_a>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\taxp209: pmic at 34 {\n" + "> +\taxp209: pmic@34 {\n" "> +\t\tcompatible = \"x-powers,axp209\";\n" "> +\t\treg = <0x34>;\n" "> +\t\tinterrupt-parent = <&nmi_intc>;\n" @@ -247,7 +259,7 @@ "> +\tenable-sdio-wakeup;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tbrcmf: bcrmf at 1 {\n" + "> +\tbrcmf: bcrmf@1 {\n" "> +\t\treg = <1>;\n" "> +\t\tcompatible = \"brcm,bcm4329-fmac\";\n" "> +\t\tinterrupt-parent = <&pio>;\n" @@ -263,42 +275,42 @@ "> +};\n" "> +\n" "> +&pio {\n" - "> +\tgmac_power_pin_bananapi: gmac_power_pin at 0 {\n" + "> +\tgmac_power_pin_bananapi: gmac_power_pin@0 {\n" "> +\t\tallwinner,pins = \"PH23\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tled_pins_bananapi: led_pins at 0 {\n" + "> +\tled_pins_bananapi: led_pins@0 {\n" "> +\t\tallwinner,pins = \"PH24\", \"PG2\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tmmc0_cd_pin_bananapi: mmc0_cd_pin at 0 {\n" + "> +\tmmc0_cd_pin_bananapi: mmc0_cd_pin@0 {\n" "> +\t\tallwinner,pins = \"PH10\";\n" "> +\t\tallwinner,function = \"gpio_in\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_PULL_UP>;\n" "> +\t};\n" "> +\n" - "> +\tusb1_vbus_pin_bananapi: usb1_vbus_pin at 0 {\n" + "> +\tusb1_vbus_pin_bananapi: usb1_vbus_pin@0 {\n" "> +\t\tallwinner,pins = \"PH0\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tusb2_vbus_pin_bananapi: usb2_vbus_pin at 0 {\n" + "> +\tusb2_vbus_pin_bananapi: usb2_vbus_pin@0 {\n" "> +\t\tallwinner,pins = \"PH1\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tvmmc3_pin_bananapi: vmmc3_pin at 0 {\n" + "> +\tvmmc3_pin_bananapi: vmmc3_pin@0 {\n" "> +\t\tallwinner,pins = \"PH22\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" @@ -339,13 +351,6 @@ "-- \n" "Maxime Ripard, Free Electrons\n" "Embedded Linux, Kernel and Android engineering\n" - "http://free-electrons.com\n" - "-------------- next part --------------\n" - "A non-text attachment was scrubbed...\n" - "Name: signature.asc\n" - "Type: application/pgp-signature\n" - "Size: 819 bytes\n" - "Desc: not available\n" - URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160530/da12d889/attachment.sig> + http://free-electrons.com -f617bc3d23807fd10a6e7befa9282bc71948195a14aa52b581cf1c34e487ab4d +b3e6fdc0c81c101789ae40ba1bfd73719a75ca97855db43a7067ac7ae9c5c573
diff --git a/a/1.txt b/N2/1.txt index 82bc5fa..8c4cf4c 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -1,6 +1,6 @@ Hi, -On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly at gmail.com wrote: +On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly@gmail.com wrote: > From: luoyi <luoyi.ly@gmail.com> > > Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn . @@ -192,7 +192,7 @@ Please order your nodes alphabetically. > + phy-supply = <®_gmac_3v3>; > + status = "okay"; > + -> + phy1: ethernet-phy at 1 { +> + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > +}; @@ -202,7 +202,7 @@ Please order your nodes alphabetically. > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > + -> + axp209: pmic at 34 { +> + axp209: pmic@34 { > + compatible = "x-powers,axp209"; > + reg = <0x34>; > + interrupt-parent = <&nmi_intc>; @@ -240,7 +240,7 @@ Please order your nodes alphabetically. > + enable-sdio-wakeup; > + status = "okay"; > + -> + brcmf: bcrmf at 1 { +> + brcmf: bcrmf@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + interrupt-parent = <&pio>; @@ -256,42 +256,42 @@ Please order your nodes alphabetically. > +}; > + > +&pio { -> + gmac_power_pin_bananapi: gmac_power_pin at 0 { +> + gmac_power_pin_bananapi: gmac_power_pin@0 { > + allwinner,pins = "PH23"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + led_pins_bananapi: led_pins at 0 { +> + led_pins_bananapi: led_pins@0 { > + allwinner,pins = "PH24", "PG2"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + mmc0_cd_pin_bananapi: mmc0_cd_pin at 0 { +> + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { > + allwinner,pins = "PH10"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; > + }; > + -> + usb1_vbus_pin_bananapi: usb1_vbus_pin at 0 { +> + usb1_vbus_pin_bananapi: usb1_vbus_pin@0 { > + allwinner,pins = "PH0"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + usb2_vbus_pin_bananapi: usb2_vbus_pin at 0 { +> + usb2_vbus_pin_bananapi: usb2_vbus_pin@0 { > + allwinner,pins = "PH1"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + vmmc3_pin_bananapi: vmmc3_pin at 0 { +> + vmmc3_pin_bananapi: vmmc3_pin@0 { > + allwinner,pins = "PH22"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -333,10 +333,3 @@ Maxime Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --------------- next part -------------- -A non-text attachment was scrubbed... -Name: signature.asc -Type: application/pgp-signature -Size: 819 bytes -Desc: not available -URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160530/da12d889/attachment.sig> diff --git a/N2/2.bin b/N2/2.bin new file mode 100644 index 0000000..c0c0a39 --- /dev/null +++ b/N2/2.bin @@ -0,0 +1,17 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1 + +iQIcBAEBAgAGBQJXTJfsAAoJEBx+YmzsjxAguhoQAIB67L8FCM7Qe2KuT7+QkuRa +wxLhLgqQRtDyD9Je6wg/6nUhOJbz14laG7MYXB4Jxri9eCeph4AJOKSnbsOnEHit +vOQGCyu1PTToZhTPc89IKelERUMCtGDOeZPkjG/bX9Y+wqE/dKESV/g6tp7J6oka +j0MmwOx3wfJSkzgZNYlpaEpZh+Zet2GWnQ8v+MUyYYePLh9bQPkM4o7T6cRLNfro +0nbAfQ690xYXLO8d3+Y0B46+LBl7hwvtIjbBEF1hK1VN1o0RVOK5ne7PYWyTaDJ5 +nOR36MgS7IYZt6cVqJawIbZY6KtSv2J8V1rjndw3d7vFY4mrwLeQKeyRssRorL/K +TftOlPD5oOAi/xZ9cwbowYZaLchQUXgL6bA1OJjpoU0P+qbq/hlQzBr8Cb5QyuAr +HBkuC5sx7XmysgcLr4R9zZIzhGYXUv00mMKu0Tkg6jnwWECTIt+0c6nH4p977Q24 +4dAmG21sE+kOpj2x5gquL4w95wOdPaxVEl44MExDcepRIROjrs978RCcS9esIoe7 +Vx/ny1Q87MNP3cMxILYXR5l6HW0SDbKsFod9kAJ+I4/cYGpvbs1zTrRF7lqVGVbZ +dSl4hbu6xm68TWYQ8Dm4+FZvlHRh0jruYSgk9Jg4WdG+rNRPoIlumGW0eRKATtM4 +hhjXqxt6h0Y0thuu+BG3 +=WsLm +-----END PGP SIGNATURE----- diff --git a/N2/2.hdr b/N2/2.hdr new file mode 100644 index 0000000..5e5352c --- /dev/null +++ b/N2/2.hdr @@ -0,0 +1 @@ +Content-Type: application/pgp-signature; name="signature.asc" diff --git a/a/content_digest b/N2/content_digest index 3c220af..3d0b8d3 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,13 +1,24 @@ "ref\020160530123013.11575-1-luoyi.ly@gmail.com\0" - "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0" - "Subject\0[PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board\0" + "From\0Maxime Ripard <maxime.ripard@free-electrons.com>\0" + "Subject\0Re: [PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board\0" "Date\0Mon, 30 May 2016 21:43:40 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" - "\00:1\0" + "To\0luoyi.ly@gmail.com\0" + "Cc\0robh+dt@kernel.org" + pawel.moll@arm.com + mark.rutland@arm.com + ijc+devicetree@hellion.org.uk + galak@codeaurora.org + linux@arm.linux.org.uk + wens@csie.org + devicetree@vger.kernel.org + linux-arm-kernel@lists.infradead.org + linux-kernel@vger.kernel.org + " linux-sunxi@googlegroups.com\0" + "\01:1\0" "b\0" "Hi,\n" "\n" - "On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly at gmail.com wrote:\n" + "On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly@gmail.com wrote:\n" "> From: luoyi <luoyi.ly@gmail.com>\n" "> \n" "> Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn .\n" @@ -199,7 +210,7 @@ "> +\tphy-supply = <®_gmac_3v3>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tphy1: ethernet-phy at 1 {\n" + "> +\tphy1: ethernet-phy@1 {\n" "> +\t\treg = <1>;\n" "> +\t};\n" "> +};\n" @@ -209,7 +220,7 @@ "> +\tpinctrl-0 = <&i2c0_pins_a>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\taxp209: pmic at 34 {\n" + "> +\taxp209: pmic@34 {\n" "> +\t\tcompatible = \"x-powers,axp209\";\n" "> +\t\treg = <0x34>;\n" "> +\t\tinterrupt-parent = <&nmi_intc>;\n" @@ -247,7 +258,7 @@ "> +\tenable-sdio-wakeup;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tbrcmf: bcrmf at 1 {\n" + "> +\tbrcmf: bcrmf@1 {\n" "> +\t\treg = <1>;\n" "> +\t\tcompatible = \"brcm,bcm4329-fmac\";\n" "> +\t\tinterrupt-parent = <&pio>;\n" @@ -263,42 +274,42 @@ "> +};\n" "> +\n" "> +&pio {\n" - "> +\tgmac_power_pin_bananapi: gmac_power_pin at 0 {\n" + "> +\tgmac_power_pin_bananapi: gmac_power_pin@0 {\n" "> +\t\tallwinner,pins = \"PH23\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tled_pins_bananapi: led_pins at 0 {\n" + "> +\tled_pins_bananapi: led_pins@0 {\n" "> +\t\tallwinner,pins = \"PH24\", \"PG2\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tmmc0_cd_pin_bananapi: mmc0_cd_pin at 0 {\n" + "> +\tmmc0_cd_pin_bananapi: mmc0_cd_pin@0 {\n" "> +\t\tallwinner,pins = \"PH10\";\n" "> +\t\tallwinner,function = \"gpio_in\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_PULL_UP>;\n" "> +\t};\n" "> +\n" - "> +\tusb1_vbus_pin_bananapi: usb1_vbus_pin at 0 {\n" + "> +\tusb1_vbus_pin_bananapi: usb1_vbus_pin@0 {\n" "> +\t\tallwinner,pins = \"PH0\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tusb2_vbus_pin_bananapi: usb2_vbus_pin at 0 {\n" + "> +\tusb2_vbus_pin_bananapi: usb2_vbus_pin@0 {\n" "> +\t\tallwinner,pins = \"PH1\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tvmmc3_pin_bananapi: vmmc3_pin at 0 {\n" + "> +\tvmmc3_pin_bananapi: vmmc3_pin@0 {\n" "> +\t\tallwinner,pins = \"PH22\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" @@ -339,13 +350,26 @@ "-- \n" "Maxime Ripard, Free Electrons\n" "Embedded Linux, Kernel and Android engineering\n" - "http://free-electrons.com\n" - "-------------- next part --------------\n" - "A non-text attachment was scrubbed...\n" - "Name: signature.asc\n" - "Type: application/pgp-signature\n" - "Size: 819 bytes\n" - "Desc: not available\n" - URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160530/da12d889/attachment.sig> + http://free-electrons.com + "\01:2\0" + "fn\0signature.asc\0" + "b\0" + "-----BEGIN PGP SIGNATURE-----\n" + "Version: GnuPG v1\n" + "\n" + "iQIcBAEBAgAGBQJXTJfsAAoJEBx+YmzsjxAguhoQAIB67L8FCM7Qe2KuT7+QkuRa\n" + "wxLhLgqQRtDyD9Je6wg/6nUhOJbz14laG7MYXB4Jxri9eCeph4AJOKSnbsOnEHit\n" + "vOQGCyu1PTToZhTPc89IKelERUMCtGDOeZPkjG/bX9Y+wqE/dKESV/g6tp7J6oka\n" + "j0MmwOx3wfJSkzgZNYlpaEpZh+Zet2GWnQ8v+MUyYYePLh9bQPkM4o7T6cRLNfro\n" + "0nbAfQ690xYXLO8d3+Y0B46+LBl7hwvtIjbBEF1hK1VN1o0RVOK5ne7PYWyTaDJ5\n" + "nOR36MgS7IYZt6cVqJawIbZY6KtSv2J8V1rjndw3d7vFY4mrwLeQKeyRssRorL/K\n" + "TftOlPD5oOAi/xZ9cwbowYZaLchQUXgL6bA1OJjpoU0P+qbq/hlQzBr8Cb5QyuAr\n" + "HBkuC5sx7XmysgcLr4R9zZIzhGYXUv00mMKu0Tkg6jnwWECTIt+0c6nH4p977Q24\n" + "4dAmG21sE+kOpj2x5gquL4w95wOdPaxVEl44MExDcepRIROjrs978RCcS9esIoe7\n" + "Vx/ny1Q87MNP3cMxILYXR5l6HW0SDbKsFod9kAJ+I4/cYGpvbs1zTrRF7lqVGVbZ\n" + "dSl4hbu6xm68TWYQ8Dm4+FZvlHRh0jruYSgk9Jg4WdG+rNRPoIlumGW0eRKATtM4\n" + "hhjXqxt6h0Y0thuu+BG3\n" + "=WsLm\n" + "-----END PGP SIGNATURE-----\n" -f617bc3d23807fd10a6e7befa9282bc71948195a14aa52b581cf1c34e487ab4d +061cf58f71d35244afdc566108273e342a3ad81774c9d681536ab40afa09936a
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.