From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Hauke Mehrtens <hauke@hauke-m.de>
Cc: richard@nod.at, dwmw2@infradead.org, computersforpeace@gmail.com,
linux-mtd@lists.infradead.org, john@phrozen.org
Subject: Re: [PATCH v2 6/8] MTD: xway: fix nand locking
Date: Sun, 19 Jun 2016 14:41:52 +0200 [thread overview]
Message-ID: <20160619144152.4ba4de77@bbrezillon> (raw)
In-Reply-To: <1466277252-13867-7-git-send-email-hauke@hauke-m.de>
On Sat, 18 Jun 2016 21:14:10 +0200
Hauke Mehrtens <hauke@hauke-m.de> wrote:
> From: John Crispin <john@phrozen.org>
>
> The external Bus Unit (EBU) can control different flash devices, but
> these NAND flash commands have to be atomic and should not be
> interrupted in between. Lock the EBU from the beginning of the command
> till the end by moving the lock to the chip select.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
> ---
> drivers/mtd/nand/xway_nand.c | 20 ++++----------------
> 1 file changed, 4 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
> index 1511bdb..064ee41 100644
> --- a/drivers/mtd/nand/xway_nand.c
> +++ b/drivers/mtd/nand/xway_nand.c
> @@ -94,13 +94,16 @@ static void xway_reset_chip(struct nand_chip *chip)
>
> static void xway_select_chip(struct mtd_info *mtd, int chip)
> {
> + static unsigned long csflags;
>
> switch (chip) {
> case -1:
> ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
> ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
> + spin_unlock_irqrestore(&ebu_lock, csflags);
> break;
> case 0:
> + spin_lock_irqsave(&ebu_lock, csflags);
> ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
> ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
So now the spinlock is taken (and irq disabled) during the whole NAND
operation. Ouch! I hope you don't have real-time constraints in your
system.
> break;
> @@ -114,7 +117,6 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
> struct nand_chip *chip = mtd_to_nand(mtd);
> struct xway_nand_data *data = nand_get_controller_data(chip);
> unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
> - unsigned long flags;
>
> if (ctrl & NAND_CTRL_CHANGE) {
> if (ctrl & NAND_CLE)
> @@ -124,11 +126,9 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
> }
>
> if (cmd != NAND_CMD_NONE) {
> - spin_lock_irqsave(&ebu_lock, flags);
> writeb(cmd, (void __iomem *) (nandaddr | data->xway_latchcmd));
> while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
> ;
> - spin_unlock_irqrestore(&ebu_lock, flags);
> }
> }
>
> @@ -141,14 +141,8 @@ static unsigned char xway_read_byte(struct mtd_info *mtd)
> {
> struct nand_chip *this = mtd_to_nand(mtd);
> unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
> - unsigned long flags;
> - int ret;
> -
> - spin_lock_irqsave(&ebu_lock, flags);
> - ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
> - spin_unlock_irqrestore(&ebu_lock, flags);
>
> - return ret;
> + return ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
> }
>
>
> @@ -156,26 +150,20 @@ static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len)
> {
> struct nand_chip *this = mtd_to_nand(mtd);
> unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
> - unsigned long flags;
> int i;
>
> - spin_lock_irqsave(&ebu_lock, flags);
> for (i = 0; i < len; i++)
> buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
> - spin_unlock_irqrestore(&ebu_lock, flags);
> }
>
> static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
> {
> struct nand_chip *this = mtd_to_nand(mtd);
> unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
> - unsigned long flags;
> int i;
>
> - spin_lock_irqsave(&ebu_lock, flags);
> for (i = 0; i < len; i++)
> ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA));
> - spin_unlock_irqrestore(&ebu_lock, flags);
> }
>
> /*
next prev parent reply other threads:[~2016-06-19 12:42 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-18 19:14 [PATCH v2 0/8] MTD: xway: fix driver Hauke Mehrtens
2016-06-18 19:14 ` [PATCH v2 1/8] MTD: xway: convert to normal platform driver Hauke Mehrtens
2016-06-19 11:32 ` Boris Brezillon
2016-06-19 11:58 ` Hauke Mehrtens
2016-06-18 19:14 ` [PATCH v2 2/8] MTD: xway: add some more documentation Hauke Mehrtens
2016-06-19 11:39 ` Boris Brezillon
2016-06-18 19:14 ` [PATCH v2 3/8] MTD: xway: the latched command should be persistent Hauke Mehrtens
2016-06-19 11:52 ` Boris Brezillon
2016-06-19 12:04 ` Hauke Mehrtens
2016-06-19 12:09 ` Boris Brezillon
2016-06-18 19:14 ` [PATCH v2 4/8] MTD: xway: remove endless loop Hauke Mehrtens
2016-06-19 12:14 ` Boris Brezillon
2016-06-19 12:32 ` Hauke Mehrtens
2016-06-19 12:57 ` Boris Brezillon
2016-06-18 19:14 ` [PATCH v2 5/8] MTD: xway: add missing write_buf and read_buf to nand driver Hauke Mehrtens
2016-06-19 12:38 ` Boris Brezillon
2016-06-18 19:14 ` [PATCH v2 6/8] MTD: xway: fix nand locking Hauke Mehrtens
2016-06-19 12:41 ` Boris Brezillon [this message]
2016-06-19 12:53 ` Richard Weinberger
2016-06-19 12:56 ` Hauke Mehrtens
2016-06-19 13:04 ` Boris Brezillon
2016-06-19 12:58 ` Boris Brezillon
2016-06-18 19:14 ` [PATCH v2 7/8] MTD: xway: extract read and write function Hauke Mehrtens
2016-06-19 12:42 ` Boris Brezillon
2016-06-18 19:14 ` [PATCH v2 8/8] MTD: xway: use global NAND_CMD_RESET define Hauke Mehrtens
2016-06-19 13:06 ` Boris Brezillon
2016-06-19 12:50 ` [PATCH v2 0/8] MTD: xway: fix driver Boris Brezillon
2016-06-19 13:13 ` Hauke Mehrtens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160619144152.4ba4de77@bbrezillon \
--to=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=hauke@hauke-m.de \
--cc=john@phrozen.org \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.