diff for duplicates of <20160625074753.GF4000@lukather> diff --git a/a/1.txt b/N1/1.txt index cc7473e..493981a 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -6,15 +6,15 @@ However, it's usually done in a new thread, not as a reply to a previous mail. If you're not using it, git send-email does all the magic for you. -On Fri, Jun 24, 2016 at 02:11:34PM +0800, luoyi.ly at gmail.com wrote: -> From: Luo Yi <luoyi.ly@gmail.com> +On Fri, Jun 24, 2016 at 02:11:34PM +0800, luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote: +> From: Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > > Add support for the Bananapi M1 Plus A20 development board from > sinovoip.com.cn . This board is nearly a clone of the Lemaker's > Bananapro, but differ with the wlan chipset connection and i2s pinout. > And I also enable the integrated audio codec on default. > -> Signed-off-by: Luo Yi <luoyi.ly@gmail.com> +> Signed-off-by: Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > --- Having a changelog of all the changes you made here (right after ---) @@ -44,9 +44,9 @@ would be great. > +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts > @@ -0,0 +1,230 @@ > +/* -> + * Copyright 2016 Luo Yi <luoyi.ly@gmail.com> +> + * Copyright 2016 Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > + * -> + * Thanks to the original work by Hans de Goede <hdegoede@redhat.com> +> + * Thanks to the original work by Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -170,7 +170,7 @@ As Chen-Yu already told you, we don't enforce any trigger by default. > + phy-supply = <®_gmac_3v3>; > + status = "okay"; > + -> + phy1: ethernet-phy at 1 { +> + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > +}; @@ -180,7 +180,7 @@ As Chen-Yu already told you, we don't enforce any trigger by default. > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > + -> + axp209: pmic at 34 { +> + axp209: pmic@34 { > + compatible = "x-powers,axp209"; > + reg = <0x34>; > + interrupt-parent = <&nmi_intc>; @@ -223,7 +223,7 @@ drivers? > + enable-sdio-wakeup; > + status = "okay"; > + -> + brcmf: bcrmf at 1 { +> + brcmf: bcrmf@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + interrupt-parent = <&pio>; @@ -246,28 +246,28 @@ drivers? > +}; > + > +&pio { -> + gmac_power_pin_bananapi: gmac_power_pin at 0 { +> + gmac_power_pin_bananapi: gmac_power_pin@0 { > + allwinner,pins = "PH23"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + led_pins_bananapi: led_pins at 0 { +> + led_pins_bananapi: led_pins@0 { > + allwinner,pins = "PH24", "PG2"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + mmc0_cd_pin_bananapi: mmc0_cd_pin at 0 { +> + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { > + allwinner,pins = "PH10"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; > + }; > + -> + mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin at 0 { +> + mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 { > + allwinner,pins = "PH22"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -293,10 +293,3 @@ Maxime Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --------------- next part -------------- -A non-text attachment was scrubbed... -Name: signature.asc -Type: application/pgp-signature -Size: 819 bytes -Desc: not available -URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160625/30c15ac1/attachment.sig> diff --git a/a/content_digest b/N1/content_digest index 1c80614..6416ab6 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,10 +1,22 @@ "ref\020160622095723.GU26668@lukather\0" "ref\020160624061134.9500-1-luoyi.ly@gmail.com\0" - "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0" - "Subject\0[PATCH V3] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board\0" + "ref\020160624061134.9500-1-luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "From\0Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Subject\0Re: [PATCH V3] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board\0" "Date\0Sat, 25 Jun 2016 09:47:53 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" - "\00:1\0" + "To\0luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "Cc\0robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" + pawel.moll-5wv7dgnIgG8@public.gmane.org + mark.rutland-5wv7dgnIgG8@public.gmane.org + ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org + galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org + linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org + wens-jdAy2FN1RRM@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org\0" + "\01:1\0" "b\0" "Hi,\n" "\n" @@ -14,15 +26,15 @@ "previous mail. If you're not using it, git send-email does all the\n" "magic for you.\n" "\n" - "On Fri, Jun 24, 2016 at 02:11:34PM +0800, luoyi.ly at gmail.com wrote:\n" - "> From: Luo Yi <luoyi.ly@gmail.com>\n" + "On Fri, Jun 24, 2016 at 02:11:34PM +0800, luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:\n" + "> From: Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "> \n" "> Add support for the Bananapi M1 Plus A20 development board from\n" "> sinovoip.com.cn . This board is nearly a clone of the Lemaker's\n" "> Bananapro, but differ with the wlan chipset connection and i2s pinout.\n" "> And I also enable the integrated audio codec on default.\n" "> \n" - "> Signed-off-by: Luo Yi <luoyi.ly@gmail.com>\n" + "> Signed-off-by: Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "> ---\n" "\n" "Having a changelog of all the changes you made here (right after ---)\n" @@ -52,9 +64,9 @@ "> +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts\n" "> @@ -0,0 +1,230 @@\n" "> +/*\n" - "> + * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>\n" + "> + * Copyright 2016 Luo Yi <luoyi.ly-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "> + *\n" - "> + * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>\n" + "> + * Thanks to the original work by Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -178,7 +190,7 @@ "> +\tphy-supply = <®_gmac_3v3>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tphy1: ethernet-phy at 1 {\n" + "> +\tphy1: ethernet-phy@1 {\n" "> +\t\treg = <1>;\n" "> +\t};\n" "> +};\n" @@ -188,7 +200,7 @@ "> +\tpinctrl-0 = <&i2c0_pins_a>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\taxp209: pmic at 34 {\n" + "> +\taxp209: pmic@34 {\n" "> +\t\tcompatible = \"x-powers,axp209\";\n" "> +\t\treg = <0x34>;\n" "> +\t\tinterrupt-parent = <&nmi_intc>;\n" @@ -231,7 +243,7 @@ "> +\tenable-sdio-wakeup;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tbrcmf: bcrmf at 1 {\n" + "> +\tbrcmf: bcrmf@1 {\n" "> +\t\treg = <1>;\n" "> +\t\tcompatible = \"brcm,bcm4329-fmac\";\n" "> +\t\tinterrupt-parent = <&pio>;\n" @@ -254,28 +266,28 @@ "> +};\n" "> +\n" "> +&pio {\n" - "> +\tgmac_power_pin_bananapi: gmac_power_pin at 0 {\n" + "> +\tgmac_power_pin_bananapi: gmac_power_pin@0 {\n" "> +\t\tallwinner,pins = \"PH23\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tled_pins_bananapi: led_pins at 0 {\n" + "> +\tled_pins_bananapi: led_pins@0 {\n" "> +\t\tallwinner,pins = \"PH24\", \"PG2\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tmmc0_cd_pin_bananapi: mmc0_cd_pin at 0 {\n" + "> +\tmmc0_cd_pin_bananapi: mmc0_cd_pin@0 {\n" "> +\t\tallwinner,pins = \"PH10\";\n" "> +\t\tallwinner,function = \"gpio_in\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_PULL_UP>;\n" "> +\t};\n" "> +\n" - "> +\tmmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin at 0 {\n" + "> +\tmmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 {\n" "> +\t\tallwinner,pins = \"PH22\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" @@ -300,13 +312,6 @@ "-- \n" "Maxime Ripard, Free Electrons\n" "Embedded Linux, Kernel and Android engineering\n" - "http://free-electrons.com\n" - "-------------- next part --------------\n" - "A non-text attachment was scrubbed...\n" - "Name: signature.asc\n" - "Type: application/pgp-signature\n" - "Size: 819 bytes\n" - "Desc: not available\n" - URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160625/30c15ac1/attachment.sig> + http://free-electrons.com -b099fb34c596971d9738b1e9227d96c59378191e0d1d213449db96ca806a8f68 +ae8c905482ed7e33fd501fca4a4d55df7278e7a948a3f7bf4fca3d97af202f07
diff --git a/a/1.txt b/N2/1.txt index cc7473e..6545bfb 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -6,7 +6,7 @@ However, it's usually done in a new thread, not as a reply to a previous mail. If you're not using it, git send-email does all the magic for you. -On Fri, Jun 24, 2016 at 02:11:34PM +0800, luoyi.ly at gmail.com wrote: +On Fri, Jun 24, 2016 at 02:11:34PM +0800, luoyi.ly@gmail.com wrote: > From: Luo Yi <luoyi.ly@gmail.com> > > Add support for the Bananapi M1 Plus A20 development board from @@ -170,7 +170,7 @@ As Chen-Yu already told you, we don't enforce any trigger by default. > + phy-supply = <®_gmac_3v3>; > + status = "okay"; > + -> + phy1: ethernet-phy at 1 { +> + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > +}; @@ -180,7 +180,7 @@ As Chen-Yu already told you, we don't enforce any trigger by default. > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > + -> + axp209: pmic at 34 { +> + axp209: pmic@34 { > + compatible = "x-powers,axp209"; > + reg = <0x34>; > + interrupt-parent = <&nmi_intc>; @@ -223,7 +223,7 @@ drivers? > + enable-sdio-wakeup; > + status = "okay"; > + -> + brcmf: bcrmf at 1 { +> + brcmf: bcrmf@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + interrupt-parent = <&pio>; @@ -246,28 +246,28 @@ drivers? > +}; > + > +&pio { -> + gmac_power_pin_bananapi: gmac_power_pin at 0 { +> + gmac_power_pin_bananapi: gmac_power_pin@0 { > + allwinner,pins = "PH23"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + led_pins_bananapi: led_pins at 0 { +> + led_pins_bananapi: led_pins@0 { > + allwinner,pins = "PH24", "PG2"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + mmc0_cd_pin_bananapi: mmc0_cd_pin at 0 { +> + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { > + allwinner,pins = "PH10"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; > + }; > + -> + mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin at 0 { +> + mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 { > + allwinner,pins = "PH22"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -293,10 +293,3 @@ Maxime Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --------------- next part -------------- -A non-text attachment was scrubbed... -Name: signature.asc -Type: application/pgp-signature -Size: 819 bytes -Desc: not available -URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160625/30c15ac1/attachment.sig> diff --git a/N2/2.bin b/N2/2.bin new file mode 100644 index 0000000..501aa8f --- /dev/null +++ b/N2/2.bin @@ -0,0 +1,17 @@ +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1 + +iQIcBAEBAgAGBQJXbjcpAAoJEBx+YmzsjxAgdFQP/2FtZJiFIM+4wRkloCwzyxZf +eYl1fR2wjl5c0of+gbdniRk5qlFqFX6tnnDEHtMmlsB659t987e8uBmPCXuW+QPA +t2gA65xThvur3XMQGddt5BzHHaCLqMqIWTi1tUFd/Dksv8qUw3jDeJWxdNahJsKh +SFBMgZk1bzvktwdeT6D/DNly8E2oXeuekIK/I8T6magQWWKkbgxOnJK6ANDFFmWI +6fNFp3lGfChEuQdx3kAcUR265BYQp3eJo/aXEVF6oodPX77jD11Yfj0WEy29nxhI +Ogl9MfLEuzYASLd3EtR0JafN5N2qnnM/P3XiveX/jzMKuu8odGLN0DGS/0pzi5KB +yX30B22NMbsuFf8FgcsC8N2jhPDm6qLMoUKOn3bQolixQcWGARGZNH47N464hA5L +CaSKrT3yHktcjudwjO3a2kdsNQEUfNAdMdC0lMDQ/toTpR/FCHqH6yXaNaHv6Pjm +eQSNR6/pqyz73lqu5Nhjo8FmsIjEEfg85SVsSkDSIjb8A58hT07/FqPX6sJY6h8A +bo++XGKZ0aupqo7mDXcuPQMktHAoH91psubT5SPwExegtkdMo/4AL4ECeEK86W2q +pqUnPvbVoUfTfjPRZi3O5JseyXzHgmW3fsL82+zsvP9OMxkg0Zv0M25hqCefxD29 +7ODVJX6nVSfJJNnxjGQ7 +=LETi +-----END PGP SIGNATURE----- diff --git a/N2/2.hdr b/N2/2.hdr new file mode 100644 index 0000000..5e5352c --- /dev/null +++ b/N2/2.hdr @@ -0,0 +1 @@ +Content-Type: application/pgp-signature; name="signature.asc" diff --git a/a/content_digest b/N2/content_digest index 1c80614..3ef1c3b 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,10 +1,21 @@ "ref\020160622095723.GU26668@lukather\0" "ref\020160624061134.9500-1-luoyi.ly@gmail.com\0" - "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0" - "Subject\0[PATCH V3] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board\0" + "From\0Maxime Ripard <maxime.ripard@free-electrons.com>\0" + "Subject\0Re: [PATCH V3] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board\0" "Date\0Sat, 25 Jun 2016 09:47:53 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" - "\00:1\0" + "To\0luoyi.ly@gmail.com\0" + "Cc\0robh+dt@kernel.org" + pawel.moll@arm.com + mark.rutland@arm.com + ijc+devicetree@hellion.org.uk + galak@codeaurora.org + linux@arm.linux.org.uk + wens@csie.org + devicetree@vger.kernel.org + linux-arm-kernel@lists.infradead.org + linux-kernel@vger.kernel.org + " linux-sunxi@googlegroups.com\0" + "\01:1\0" "b\0" "Hi,\n" "\n" @@ -14,7 +25,7 @@ "previous mail. If you're not using it, git send-email does all the\n" "magic for you.\n" "\n" - "On Fri, Jun 24, 2016 at 02:11:34PM +0800, luoyi.ly at gmail.com wrote:\n" + "On Fri, Jun 24, 2016 at 02:11:34PM +0800, luoyi.ly@gmail.com wrote:\n" "> From: Luo Yi <luoyi.ly@gmail.com>\n" "> \n" "> Add support for the Bananapi M1 Plus A20 development board from\n" @@ -178,7 +189,7 @@ "> +\tphy-supply = <®_gmac_3v3>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tphy1: ethernet-phy at 1 {\n" + "> +\tphy1: ethernet-phy@1 {\n" "> +\t\treg = <1>;\n" "> +\t};\n" "> +};\n" @@ -188,7 +199,7 @@ "> +\tpinctrl-0 = <&i2c0_pins_a>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\taxp209: pmic at 34 {\n" + "> +\taxp209: pmic@34 {\n" "> +\t\tcompatible = \"x-powers,axp209\";\n" "> +\t\treg = <0x34>;\n" "> +\t\tinterrupt-parent = <&nmi_intc>;\n" @@ -231,7 +242,7 @@ "> +\tenable-sdio-wakeup;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tbrcmf: bcrmf at 1 {\n" + "> +\tbrcmf: bcrmf@1 {\n" "> +\t\treg = <1>;\n" "> +\t\tcompatible = \"brcm,bcm4329-fmac\";\n" "> +\t\tinterrupt-parent = <&pio>;\n" @@ -254,28 +265,28 @@ "> +};\n" "> +\n" "> +&pio {\n" - "> +\tgmac_power_pin_bananapi: gmac_power_pin at 0 {\n" + "> +\tgmac_power_pin_bananapi: gmac_power_pin@0 {\n" "> +\t\tallwinner,pins = \"PH23\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tled_pins_bananapi: led_pins at 0 {\n" + "> +\tled_pins_bananapi: led_pins@0 {\n" "> +\t\tallwinner,pins = \"PH24\", \"PG2\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tmmc0_cd_pin_bananapi: mmc0_cd_pin at 0 {\n" + "> +\tmmc0_cd_pin_bananapi: mmc0_cd_pin@0 {\n" "> +\t\tallwinner,pins = \"PH10\";\n" "> +\t\tallwinner,function = \"gpio_in\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_PULL_UP>;\n" "> +\t};\n" "> +\n" - "> +\tmmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin at 0 {\n" + "> +\tmmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 {\n" "> +\t\tallwinner,pins = \"PH22\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" @@ -300,13 +311,26 @@ "-- \n" "Maxime Ripard, Free Electrons\n" "Embedded Linux, Kernel and Android engineering\n" - "http://free-electrons.com\n" - "-------------- next part --------------\n" - "A non-text attachment was scrubbed...\n" - "Name: signature.asc\n" - "Type: application/pgp-signature\n" - "Size: 819 bytes\n" - "Desc: not available\n" - URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160625/30c15ac1/attachment.sig> + http://free-electrons.com + "\01:2\0" + "fn\0signature.asc\0" + "b\0" + "-----BEGIN PGP SIGNATURE-----\n" + "Version: GnuPG v1\n" + "\n" + "iQIcBAEBAgAGBQJXbjcpAAoJEBx+YmzsjxAgdFQP/2FtZJiFIM+4wRkloCwzyxZf\n" + "eYl1fR2wjl5c0of+gbdniRk5qlFqFX6tnnDEHtMmlsB659t987e8uBmPCXuW+QPA\n" + "t2gA65xThvur3XMQGddt5BzHHaCLqMqIWTi1tUFd/Dksv8qUw3jDeJWxdNahJsKh\n" + "SFBMgZk1bzvktwdeT6D/DNly8E2oXeuekIK/I8T6magQWWKkbgxOnJK6ANDFFmWI\n" + "6fNFp3lGfChEuQdx3kAcUR265BYQp3eJo/aXEVF6oodPX77jD11Yfj0WEy29nxhI\n" + "Ogl9MfLEuzYASLd3EtR0JafN5N2qnnM/P3XiveX/jzMKuu8odGLN0DGS/0pzi5KB\n" + "yX30B22NMbsuFf8FgcsC8N2jhPDm6qLMoUKOn3bQolixQcWGARGZNH47N464hA5L\n" + "CaSKrT3yHktcjudwjO3a2kdsNQEUfNAdMdC0lMDQ/toTpR/FCHqH6yXaNaHv6Pjm\n" + "eQSNR6/pqyz73lqu5Nhjo8FmsIjEEfg85SVsSkDSIjb8A58hT07/FqPX6sJY6h8A\n" + "bo++XGKZ0aupqo7mDXcuPQMktHAoH91psubT5SPwExegtkdMo/4AL4ECeEK86W2q\n" + "pqUnPvbVoUfTfjPRZi3O5JseyXzHgmW3fsL82+zsvP9OMxkg0Zv0M25hqCefxD29\n" + "7ODVJX6nVSfJJNnxjGQ7\n" + "=LETi\n" + "-----END PGP SIGNATURE-----\n" -b099fb34c596971d9738b1e9227d96c59378191e0d1d213449db96ca806a8f68 +a4dc8f4cf5fc607e3a57196eb210cbb0278abdda260dde24ef0864e8c129b0fa
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.