diff for duplicates of <20160719151314.GH7132@piout.net> diff --git a/a/1.txt b/N1/1.txt index 2cbdffd..16b16ef 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,15 +1,15 @@ On 27/06/2016 at 18:15:17 +0300, Sergei Ianovich wrote : > > How do yo currently select microwire mode for PX270? ->=20 +> > I didn't say I use PXA270 to drive this RTC. I just say it is possible. > The driver needs to set bits 5:4 of SSCR0_1/2/3 register to 0b10. > Microwire mode will be selected for a built-in SPI port. All bitbanging > will be done by the chip, the driver will just need to set up DMA > transfer. This is an example of a pretty sophisticated hardware > controller. ->=20 +> > I actually use a simple software controller in LP8841. The driver is -> in=C2=A0drivers/spi/spi-lp8841-rtc.c. +> in drivers/spi/spi-lp8841-rtc.c. Ok, seeing that, now I'm thinking that switching the ds1302 driver to spi was a mistake and bitbanging in the driver was the right thing to @@ -23,19 +23,17 @@ including old architectures. Else, I may as well revert to the previous driver. ---=20 +-- Alexandre Belloni, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com ---=20 +-- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. ----=20 -You received this message because you are subscribed to the Google Groups "= -rtc-linux" group. -To unsubscribe from this group and stop receiving emails from it, send an e= -mail to rtc-linux+unsubscribe@googlegroups.com. +--- +You received this message because you are subscribed to the Google Groups "rtc-linux" group. +To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/d/optout. diff --git a/a/content_digest b/N1/content_digest index 6ab20b4..fc8a8da 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -3,29 +3,30 @@ "ref\01467028249.3182.11.camel@gmail.com\0" "ref\020160627124432.GI29249@piout.net\0" "ref\01467040517.3182.34.camel@gmail.com\0" - "From\0Alexandre Belloni <alexandre.belloni@free-electrons.com>\0" - "Subject\0[rtc-linux] Re: [PATCH v2 1/2] rtc: ds1302: add register access abstraction layer\0" + "ref\01467040517.3182.34.camel-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "From\0Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Subject\0Re: [PATCH v2 1/2] rtc: ds1302: add register access abstraction layer\0" "Date\0Tue, 19 Jul 2016 17:13:14 +0200\0" - "To\0Sergei Ianovich <ynvich@gmail.com>" - " Mark Brown <broonie@kernel.org>\0" - "Cc\0Akinobu Mita <akinobu.mita@gmail.com>" - rtc-linux@googlegroups.com - devicetree@vger.kernel.org - " Alessandro Zummo <a.zummo@towertech.it>\0" + "To\0Sergei Ianovich <ynvich-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>" + " Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>\0" + "Cc\0Akinobu Mita <akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>" + rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>\0" "\00:1\0" "b\0" "On 27/06/2016 at 18:15:17 +0300, Sergei Ianovich wrote :\n" "> > How do yo currently select microwire mode for PX270?\n" - ">=20\n" + "> \n" "> I didn't say I use PXA270 to drive this RTC. I just say it is possible.\n" "> The driver needs to set bits 5:4 of SSCR0_1/2/3 register to 0b10.\n" "> Microwire mode will be selected for a built-in SPI port. All bitbanging\n" "> will be done by the chip, the driver will just need to set up DMA\n" "> transfer. This is an example of a pretty sophisticated hardware\n" "> controller.\n" - ">=20\n" + "> \n" "> I actually use a simple software controller in LP8841. The driver is\n" - "> in=C2=A0drivers/spi/spi-lp8841-rtc.c.\n" + "> in\302\240drivers/spi/spi-lp8841-rtc.c.\n" "\n" "Ok, seeing that, now I'm thinking that switching the ds1302 driver to\n" "spi was a mistake and bitbanging in the driver was the right thing to\n" @@ -39,21 +40,19 @@ "\n" "Else, I may as well revert to the previous driver.\n" "\n" - "--=20\n" + "-- \n" "Alexandre Belloni, Free Electrons\n" "Embedded Linux and Kernel engineering\n" "http://free-electrons.com\n" "\n" - "--=20\n" + "-- \n" "You received this message because you are subscribed to \"rtc-linux\".\n" "Membership options at http://groups.google.com/group/rtc-linux .\n" "Please read http://groups.google.com/group/rtc-linux/web/checklist\n" "before submitting a driver.\n" - "---=20\n" - "You received this message because you are subscribed to the Google Groups \"=\n" - "rtc-linux\" group.\n" - "To unsubscribe from this group and stop receiving emails from it, send an e=\n" - "mail to rtc-linux+unsubscribe@googlegroups.com.\n" + "--- \n" + "You received this message because you are subscribed to the Google Groups \"rtc-linux\" group.\n" + "To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\n" For more options, visit https://groups.google.com/d/optout. -5e1d705a9dd8ba39fd53bd25befbbcf7e842fa98098c6314ddda4a6ef5e5887c +4793c6cd47823988def0d367915c0a95e2a7e3ea36c3918a47e3283837cea880
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.