Re: [PATCH] Input: tsc200x - Report proper input_dev name

[Michael Welling <mwelling@ieee.org>]

On Wed, Jul 20, 2016 at 08:31:06AM +0200, Pavel Machek wrote:
> Hi!
> 
> > Passes input_id struct to the the common probe function for the tsc200x drivers
> > instead of just the bustype.
> > 
> > This allows for the use of the product variable to set the input_dev->name
> > variable according to the type of touchscreen used.
> > 
> > Signed-off-by: Michael Welling <mwelling@ieee.org>
> > ---
> >  drivers/input/touchscreen/tsc2004.c      | 7 ++++++-
> >  drivers/input/touchscreen/tsc2005.c      | 7 ++++++-
> >  drivers/input/touchscreen/tsc200x-core.c | 7 ++++---
> >  drivers/input/touchscreen/tsc200x-core.h | 2 +-
> >  4 files changed, 17 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/input/touchscreen/tsc2004.c b/drivers/input/touchscreen/tsc2004.c
> > index 7295c19..6fe55d5 100644
> > --- a/drivers/input/touchscreen/tsc2004.c
> > +++ b/drivers/input/touchscreen/tsc2004.c
> > @@ -22,6 +22,11 @@
> >  #include <linux/regmap.h>
> >  #include "tsc200x-core.h"
> >  
> > +static const struct input_id tsc2004_input_id = {
> > +	.bustype = BUS_I2C,
> > +	.product = 2004,
> > +};
> > +
> >  static int tsc2004_cmd(struct device *dev, u8 cmd)
> >  {
> >  	u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd;
> > @@ -42,7 +47,7 @@ static int tsc2004_probe(struct i2c_client *i2c,
> >  			 const struct i2c_device_id *id)
> >  
> >  {
> > -	return tsc200x_probe(&i2c->dev, i2c->irq, BUS_I2C,
> > +	return tsc200x_probe(&i2c->dev, i2c->irq, &tsc2004_input_id,
> >  			     devm_regmap_init_i2c(i2c, &tsc200x_regmap_config),
> >  			     tsc2004_cmd);
> >  }
> > diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
> > index b9f593d..f2c5f0e 100644
> > --- a/drivers/input/touchscreen/tsc2005.c
> > +++ b/drivers/input/touchscreen/tsc2005.c
> > @@ -24,6 +24,11 @@
> >  #include <linux/regmap.h>
> >  #include "tsc200x-core.h"
> >  
> > +static const struct input_id tsc2005_input_id = {
> > +	.bustype = BUS_SPI,
> > +	.product = 2005,
> > +};
> > +
> >  static int tsc2005_cmd(struct device *dev, u8 cmd)
> >  {
> >  	u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd;
> > @@ -62,7 +67,7 @@ static int tsc2005_probe(struct spi_device *spi)
> >  	if (error)
> >  		return error;
> >  
> > -	return tsc200x_probe(&spi->dev, spi->irq, BUS_SPI,
> > +	return tsc200x_probe(&spi->dev, spi->irq, &tsc2005_input_id,
> >  			     devm_regmap_init_spi(spi, &tsc200x_regmap_config),
> >  			     tsc2005_cmd);
> >  }
> > diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
> > index 26e81d1b..5e625c4 100644
> > --- a/drivers/input/touchscreen/tsc200x-core.c
> > +++ b/drivers/input/touchscreen/tsc200x-core.c
> > @@ -450,7 +450,7 @@ static void tsc200x_close(struct input_dev *input)
> >  	mutex_unlock(&ts->mutex);
> >  }
> >  
> > -int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
> > +int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
> >  		  struct regmap *regmap,
> >  		  int (*tsc200x_cmd)(struct device *dev, u8 cmd))
> >  {
> > @@ -547,9 +547,10 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
> >  	snprintf(ts->phys, sizeof(ts->phys),
> >  		 "%s/input-ts", dev_name(dev));
> >  
> > -	input_dev->name = "TSC200X touchscreen";
> > +	input_dev->name = devm_kasprintf(dev, GFP_KERNEL, "TSC%04d touchscreen",
> > +					tsc_id->product);
> 
> What about:
> 
>      if (tsc_id->product == 2005)
>           input_dev->name = "TSC2005 touchscreen";
>      else
>           input_dev->name = "TSC200X touchscreen";
> 
> We do want to use 'TSC2005' name for TSC2005, because compatibility,
> but you should keep TSC200X.... because compatibility. You don't want
> to break people's setups by going from TSC200X to TSC2004.

By same logic we shouldn't change from TSC200X back to TSC2005 because of
people's possibly new setup in the last 9 months.

> 
> Best regards,
> 									Pavel
> 
> -- 
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html