From: Mike Snitzer <snitzer@redhat.com>
To: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: device-mapper development <dm-devel@redhat.com>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>
Subject: Re: dm-mq and end_clone_request()
Date: Wed, 27 Jul 2016 16:09:40 -0400 [thread overview]
Message-ID: <20160727200939.GA82654@redhat.com> (raw)
In-Reply-To: <20160726011607.GA77078@redhat.com>
On Mon, Jul 25 2016 at 9:16pm -0400,
Mike Snitzer <snitzer@redhat.com> wrote:
> Hi Bart,
>
> Please try this patch to see if it fixes your issue, thanks.
>
> diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
> index 52baf8a..287caa7 100644
> --- a/drivers/md/dm-mpath.c
> +++ b/drivers/md/dm-mpath.c
> @@ -433,10 +433,17 @@ failed:
> */
> static int must_push_back(struct multipath *m)
> {
> - return (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) ||
> - ((test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) !=
> - test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags)) &&
> - dm_noflush_suspending(m->ti)));
> + bool r;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&m->lock, flags);
> + r = (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) ||
> + ((test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) !=
> + test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags)) &&
> + dm_noflush_suspending(m->ti)));
> + spin_unlock_irqrestore(&m->lock, flags);
> +
> + return r;
> }
>
> /*
In addition to the above patch, please apply this patch and retest your
4.7 kernel:
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 287caa7..16583c1 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1416,12 +1416,14 @@ static void multipath_postsuspend(struct dm_target *ti)
static void multipath_resume(struct dm_target *ti)
{
struct multipath *m = ti->private;
+ unsigned long flags;
+ spin_lock_irqsave(&m->lock, flags);
if (test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags))
set_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags);
else
clear_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags);
- smp_mb__after_atomic();
+ spin_unlock_irqrestore(&m->lock, flags);
}
/*
next prev parent reply other threads:[~2016-07-27 20:09 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-19 22:57 dm-mq and end_clone_request() Bart Van Assche
2016-07-20 14:08 ` Mike Snitzer
2016-07-20 14:27 ` Mike Snitzer
2016-07-20 17:37 ` Bart Van Assche
2016-07-20 18:33 ` Mike Snitzer
2016-07-21 20:58 ` [dm-devel] " Bart Van Assche
2016-07-25 17:53 ` Mike Snitzer
2016-07-25 21:23 ` Mike Snitzer
2016-07-25 22:00 ` Bart Van Assche
2016-07-26 1:16 ` Mike Snitzer
2016-07-26 22:51 ` Bart Van Assche
2016-07-27 14:08 ` Mike Snitzer
2016-07-27 15:52 ` [dm-devel] " Benjamin Marzinski
2016-07-27 19:06 ` Bart Van Assche
2016-07-27 19:54 ` Mike Snitzer
2016-07-27 20:09 ` Mike Snitzer [this message]
2016-07-27 23:05 ` Bart Van Assche
2016-07-28 13:33 ` Mike Snitzer
2016-07-28 15:23 ` Bart Van Assche
2016-07-28 15:40 ` Mike Snitzer
2016-07-29 6:28 ` [dm-devel] " Hannes Reinecke
2016-07-26 6:02 ` Hannes Reinecke
2016-07-26 16:06 ` Mike Snitzer
[not found] ` <317679447.7168375.1469729769593.JavaMail.zimbra@redhat.com>
[not found] ` <6880321d-e14f-169b-d100-6e460dd9bd09@sandisk.com>
[not found] ` <1110327939.7305916.1469819453678.JavaMail.zimbra@redhat.com>
[not found] ` <a5c1a149-b1a2-b5a4-2207-bdaf32db3cbd@sandisk.com>
[not found] ` <757522831.7667712.1470059860543.JavaMail.zimbra@redhat.com>
[not found] ` <536022978.7668211.1470060125271.JavaMail.zimbra@redhat.com>
[not found] ` <931235537.7668834.1470060339483.JavaMail.zimbra@redhat.com>
[not found] ` <1264951811.7684268.1470065187014.JavaMail.zimbra@redhat.com>
[not found] ` <17da3ab0-233a-2cec-f921-bfd42c953ccc@sandisk.com>
2016-08-01 17:59 ` Mike Snitzer
2016-08-01 18:55 ` Bart Van Assche
2016-08-01 19:15 ` Mike Snitzer
2016-08-01 20:46 ` Mike Snitzer
2016-08-01 22:41 ` Bart Van Assche
2016-08-01 22:41 ` Bart Van Assche
2016-08-02 17:45 ` Mike Snitzer
2016-08-03 0:19 ` Bart Van Assche
2016-08-03 0:40 ` Mike Snitzer
2016-08-03 1:33 ` Laurence Oberman
2016-08-03 2:10 ` Mike Snitzer
2016-08-03 2:18 ` Laurence Oberman
2016-08-03 2:55 ` Laurence Oberman
2016-08-03 15:10 ` Laurence Oberman
2016-08-03 16:06 ` Bart Van Assche
2016-08-03 17:25 ` Laurence Oberman
2016-08-03 18:03 ` [dm-devel] " Laurence Oberman
2016-08-03 16:55 ` Bart Van Assche
2016-08-04 9:53 ` Hannes Reinecke
2016-08-04 10:09 ` Hannes Reinecke
2016-08-04 15:10 ` Mike Snitzer
2016-08-04 16:10 ` Mike Snitzer
2016-08-04 17:42 ` Bart Van Assche
2016-08-04 23:58 ` Mike Snitzer
2016-08-05 1:07 ` Laurence Oberman
2016-08-05 11:43 ` Laurence Oberman
2016-08-05 15:39 ` Laurence Oberman
2016-08-05 15:43 ` Bart Van Assche
2016-08-05 18:42 ` [dm-devel] " Bart Van Assche
2016-08-06 14:47 ` Laurence Oberman
2016-08-07 22:31 ` [dm-devel] " Bart Van Assche
2016-08-08 12:45 ` Laurence Oberman
2016-08-08 13:44 ` Johannes Thumshirn
2016-08-08 13:44 ` Johannes Thumshirn
2016-08-08 14:32 ` Laurence Oberman
2016-08-08 14:54 ` Bart Van Assche
2016-08-08 15:11 ` Bart Van Assche
2016-08-08 15:26 ` Laurence Oberman
2016-08-08 15:28 ` Bart Van Assche
2016-08-08 22:39 ` Bart Van Assche
2016-08-08 22:52 ` Laurence Oberman
2016-08-09 0:09 ` Laurence Oberman
2016-08-09 15:51 ` Bart Van Assche
2016-08-09 17:12 ` [dm-devel] " Laurence Oberman
2016-08-09 17:16 ` Bart Van Assche
2016-08-09 17:21 ` Laurence Oberman
2016-08-10 21:38 ` Laurence Oberman
2016-08-11 16:51 ` Laurence Oberman
2016-08-05 18:40 ` Bart Van Assche
2016-07-21 20:32 ` Mike Snitzer
2016-07-21 20:40 ` [dm-devel] " Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160727200939.GA82654@redhat.com \
--to=snitzer@redhat.com \
--cc=bart.vanassche@sandisk.com \
--cc=dm-devel@redhat.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.