From: Rob Herring <robh@kernel.org>
To: Kees Cook <keescook@chromium.org>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Greg Hackmann <ghackmann@google.com>,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH] Revert "pstore/ram: add Device Tree bindings"
Date: Thu, 28 Jul 2016 15:25:37 -0500 [thread overview]
Message-ID: <20160728202537.11961-1-robh@kernel.org> (raw)
This reverts commit 35da60941e44dbf57868e67686dd24cc1a33125a.
---
WTF!
I don't recall acking this nor have my comments (Arnd's really) been
addressed[1]. This should not have been merged yet.
Rob
[1] https://lkml.org/lkml/2016/6/21/969
Documentation/devicetree/bindings/misc/ramoops.txt | 48 -----------
Documentation/ramoops.txt | 6 +-
fs/pstore/ram.c | 95 +---------------------
3 files changed, 4 insertions(+), 145 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/misc/ramoops.txt
diff --git a/Documentation/devicetree/bindings/misc/ramoops.txt b/Documentation/devicetree/bindings/misc/ramoops.txt
deleted file mode 100644
index cd02cec..0000000
--- a/Documentation/devicetree/bindings/misc/ramoops.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Ramoops oops/panic logger
-=========================
-
-ramoops provides persistent RAM storage for oops and panics, so they can be
-recovered after a reboot. It is a backend to pstore, so this node is named
-"ramoops" after the backend, rather than "pstore" which is the subsystem.
-
-Parts of this storage may be set aside for other persistent log buffers, such
-as kernel log messages, or for optional ECC error-correction data. The total
-size of these optional buffers must fit in the reserved region.
-
-Any remaining space will be used for a circular buffer of oops and panic
-records. These records have a configurable size, with a size of 0 indicating
-that they should be disabled.
-
-At least one of "record-size", "console-size", "ftrace-size", or "pmsg-size"
-must be set non-zero, but are otherwise optional as listed below.
-
-
-Required properties:
-
-- compatible: must be "ramoops"
-
-- memory-region: phandle to a region of memory that is preserved between
- reboots
-
-
-Optional properties:
-
-- ecc-size: enables ECC support and specifies ECC buffer size in bytes
- (defaults to 0: no ECC)
-
-- record-size: maximum size in bytes of each dump done on oops/panic
- (defaults to 0: disabled)
-
-- console-size: size in bytes of log buffer reserved for kernel messages
- (defaults to 0: disabled)
-
-- ftrace-size: size in bytes of log buffer reserved for function tracing and
- profiling (defaults to 0: disabled)
-
-- pmsg-size: size in bytes of log buffer reserved for userspace messages
- (defaults to 0: disabled)
-
-- unbuffered: if present, use unbuffered mappings to map the reserved region
- (defaults to buffered mappings)
-
-- no-dump-oops: if present, only dump panics (defaults to panics and oops)
diff --git a/Documentation/ramoops.txt b/Documentation/ramoops.txt
index 9264bca..5d86756 100644
--- a/Documentation/ramoops.txt
+++ b/Documentation/ramoops.txt
@@ -45,7 +45,7 @@ corrupt, but usually it is restorable.
2. Setting the parameters
-Setting the ramoops parameters can be done in 3 different manners:
+Setting the ramoops parameters can be done in 2 different manners:
1. Use the module parameters (which have the names of the variables described
as before).
For quick debugging, you can also reserve parts of memory during boot
@@ -54,9 +54,7 @@ Setting the ramoops parameters can be done in 3 different manners:
kernel to use only the first 128 MB of memory, and place ECC-protected ramoops
region at 128 MB boundary:
"mem=128M ramoops.mem_address=0x8000000 ramoops.ecc=1"
- 2. Use Device Tree bindings, as described in
- Documentation/device-tree/bindings/misc/ramoops.txt.
- 3. Use a platform device and set the platform data. The parameters can then
+ 2. Use a platform device and set the platform data. The parameters can then
be set through that platform data. An example of doing that is:
#include <linux/pstore_ram.h>
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index 47516a7..d9668c2 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -34,8 +34,6 @@
#include <linux/slab.h>
#include <linux/compiler.h>
#include <linux/pstore_ram.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
#define RAMOOPS_KERNMSG_HDR "===="
#define MIN_MEM_SIZE 4096UL
@@ -460,98 +458,15 @@ static int ramoops_init_prz(struct device *dev, struct ramoops_context *cxt,
return 0;
}
-static int ramoops_parse_dt_size(struct platform_device *pdev,
- const char *propname, u32 *value)
-{
- u32 val32 = 0;
- int ret;
-
- ret = of_property_read_u32(pdev->dev.of_node, propname, &val32);
- if (ret < 0 && ret != -EINVAL) {
- dev_err(&pdev->dev, "failed to parse property %s: %d\n",
- propname, ret);
- return ret;
- }
-
- if (val32 > INT_MAX) {
- dev_err(&pdev->dev, "%s %u > INT_MAX\n", propname, val32);
- return -EOVERFLOW;
- }
-
- *value = val32;
- return 0;
-}
-
-static int ramoops_parse_dt(struct platform_device *pdev,
- struct ramoops_platform_data *pdata)
-{
- struct device_node *of_node = pdev->dev.of_node;
- struct device_node *mem_region;
- struct resource res;
- u32 value;
- int ret;
-
- dev_dbg(&pdev->dev, "using Device Tree\n");
-
- mem_region = of_parse_phandle(of_node, "memory-region", 0);
- if (!mem_region) {
- dev_err(&pdev->dev, "no memory-region phandle\n");
- return -ENODEV;
- }
-
- ret = of_address_to_resource(mem_region, 0, &res);
- of_node_put(mem_region);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to translate memory-region to resource: %d\n",
- ret);
- return ret;
- }
-
- pdata->mem_size = resource_size(&res);
- pdata->mem_address = res.start;
- pdata->mem_type = of_property_read_bool(of_node, "unbuffered");
- pdata->dump_oops = !of_property_read_bool(of_node, "no-dump-oops");
-
-#define parse_size(name, field) { \
- ret = ramoops_parse_dt_size(pdev, name, &value); \
- if (ret < 0) \
- return ret; \
- field = value; \
- }
-
- parse_size("record-size", pdata->record_size);
- parse_size("console-size", pdata->console_size);
- parse_size("ftrace-size", pdata->ftrace_size);
- parse_size("pmsg-size", pdata->pmsg_size);
- parse_size("ecc-size", pdata->ecc_info.ecc_size);
-
-#undef parse_size
-
- return 0;
-}
-
static int ramoops_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct ramoops_platform_data *pdata = dev->platform_data;
+ struct ramoops_platform_data *pdata = pdev->dev.platform_data;
struct ramoops_context *cxt = &oops_cxt;
size_t dump_mem_sz;
phys_addr_t paddr;
int err = -EINVAL;
- if (dev_of_node(dev) && !pdata) {
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata) {
- err = -ENOMEM;
- goto fail_out;
- }
-
- err = ramoops_parse_dt(pdev, pdata);
- if (err < 0)
- goto fail_out;
- }
-
/* Only a single ramoops area allowed at a time, so fail extra
* probes.
*/
@@ -681,17 +596,11 @@ static int ramoops_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id dt_match[] = {
- { .compatible = "ramoops" },
- {}
-};
-
static struct platform_driver ramoops_driver = {
.probe = ramoops_probe,
.remove = ramoops_remove,
.driver = {
- .name = "ramoops",
- .of_match_table = dt_match,
+ .name = "ramoops",
},
};
--
2.9.2
next reply other threads:[~2016-07-28 20:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-28 20:25 Rob Herring [this message]
[not found] ` <20160728202537.11961-1-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-07-28 20:50 ` [PATCH] Revert "pstore/ram: add Device Tree bindings" Kees Cook
2016-07-28 20:50 ` Kees Cook
[not found] ` <CAGXu5jJnfCGsqiuVWNrvrZkmKz5nD0hnQSQ+Vr4x-GD5dDa7AA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-07-28 21:10 ` Rob Herring
2016-07-28 21:10 ` Rob Herring
[not found] ` <CAL_Jsq+VmaFjWKqKfuqh5a1WkSYuw8w8SKBHK7MF6j-i7Fv_gA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-07-28 22:44 ` Kees Cook
2016-07-28 22:44 ` Kees Cook
2016-07-30 0:49 ` Kees Cook
2016-07-30 13:29 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160728202537.11961-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=ghackmann@google.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.