All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lukasz Majewski <l.majewski@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data
Date: Mon, 01 Aug 2016 12:05:52 +0200	[thread overview]
Message-ID: <20160801120552.4208c9e1@amdc2363> (raw)
In-Reply-To: <57959BAD.2010304@samsung.com>

Dear All,

> Hi All,
> 
> On 07/12/2016 09:55 PM, Lukasz Majewski wrote:
> > Hi Jaehoon,
> > 
> >> There is no data, it doesn't needs to wait for completing data
> >> transfer. (It seems that it can be removed.)
> >> Almost all timeout error is occured from stop command without data.
> >> After applied this patch, I hope that we don't need to increase
> >> timeout value anymore.
> > 
> > This patch fixes issue (in a better way) for Odroid U3 write
> > performance (http://patchwork.ozlabs.org/patch/646932/) and hence
> > should be used.
> > 
> 
> Is there any other opinion for this patch?
> Who is maintaining u-boot-mmc? Is Pantelis still maintaining
> u-boot-mmc?
> 
> Who can apply this patch and patch relevant to mmc?

Gentle ping .....

Pantelis could you pull this patch to u-boot-mmc tree?

> 
> Best Regards,
> Jaehoon Chung
> 
> > 
> >>
> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> >> ---
> >>  drivers/mmc/sdhci.c | 3 ++-
> >>  1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> >> index 604f18d..0a38a56 100644
> >> --- a/drivers/mmc/sdhci.c
> >> +++ b/drivers/mmc/sdhci.c
> >> @@ -175,7 +175,8 @@ static int sdhci_send_command(struct mmc *mmc,
> >> struct mmc_cmd *cmd, flags = SDHCI_CMD_RESP_LONG;
> >>  	else if (cmd->resp_type & MMC_RSP_BUSY) {
> >>  		flags = SDHCI_CMD_RESP_SHORT_BUSY;
> >> -		mask |= SDHCI_INT_DATA_END;
> >> +		if (data)
> >> +			mask |= SDHCI_INT_DATA_END;
> >>  	} else
> >>  		flags = SDHCI_CMD_RESP_SHORT;
> >>  
> > 
> > Acked-by: Lukasz Majewski <l.majewski@samsung.com>
> > Tested-by: Lukasz Majewski <l.majewski@samsung.com>
> > 
> > Test HW: Odroid U3 (Exynos4):
> > 
> > Odroid # ext4load mmc 0:2 0x41000000 dat_31M.img
> > 32505856 bytes read in 1471 ms (21.1 MiB/s)
> > Odroid # ext4write mmc 0:2 0x41000000 /dat_w55.img 0x1f00000
> > File System is consistent
> > update journal finished
> > 32505856 bytes written in 3528 ms (8.8 MiB/s)
> > 
> > Performance improvement is even better than with previously proposed
> > patches.
> > 
> > Test HW: Odroid XU3 (Exynos5):
> > 
> > ODROID-XU3 # ext4load mmc 0:2 0x41000000 dat_31M.img
> > 32505856 bytes read in 6309 ms (4.9 MiB/s)
> > ODROID-XU3 # ext4write mmc 0:2 0x41000000 /dat_w1.img 0x1f00000
> > File System is consistent
> > update journal finished
> > 32505856 bytes written in 4884 ms (6.3 MiB/s)
> > 
> > 
> 



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

  parent reply	other threads:[~2016-08-01 10:05 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-12 12:18 [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data Jaehoon Chung
2016-07-12 12:18 ` [U-Boot] [PATCH 2/2] mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B Jaehoon Chung
2016-07-12 12:55   ` Lukasz Majewski
2016-08-05  2:24   ` [U-Boot] [U-Boot, " Jaehoon Chung
2016-07-12 12:55 ` [U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data Lukasz Majewski
2016-07-25  4:55   ` Jaehoon Chung
2016-07-25 10:10     ` Minkyu Kang
2016-07-25 10:21     ` Lukasz Majewski
2016-07-25 23:23       ` Steve Rae
2016-07-25 23:28         ` Steve Rae
2016-07-26  9:13         ` Lukasz Majewski
2016-07-26 16:10           ` Steve Rae
2016-07-27  5:11             ` Jaehoon Chung
2016-08-01 10:05     ` Lukasz Majewski [this message]
2016-08-05  2:24 ` [U-Boot] [U-Boot, " Jaehoon Chung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160801120552.4208c9e1@amdc2363 \
    --to=l.majewski@samsung.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.