All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Bill O'Donnell" <billodo@redhat.com>
To: Eric Sandeen <sandeen@redhat.com>
Cc: xfs-oss <xfs@oss.sgi.com>
Subject: Re: [PATCH] xfs_quota: wire up XFS_GETQSTATV
Date: Mon, 15 Aug 2016 08:44:00 -0500	[thread overview]
Message-ID: <20160815134400.GA16987@redhat.com> (raw)
In-Reply-To: <a8d81afb-8c95-c6bf-028d-8d6e463557b3@redhat.com>

On Fri, Aug 12, 2016 at 06:07:00PM -0500, Eric Sandeen wrote:
> The new XFS_GETQSTATV quotactl, available since kernel v3.12,
> was never implemented in xfs_quota, and the "state" command
> continues to use XFS_GETQSTAT, which cannot report both
> group & project quota on newer formats.
> 
> The new call has room for all 3 quota types (user, group, and
> quota), vs just two, where previously project and quota
> overlapped.
> 
> So:
> 
> First, try XFS_GETQSTATV.
> If it passes, we have all the information we need, and we print
> it. state_qfilestat() is modified to take the newer structure.
> 
> If it fails, try XFS_GETQSTAT.  If that passes, we are on an
> older kernel with neither XFS_GETQSTATV nor the on-disk project
> quota inode.  We copy the available information into the newer
> statv structure, carefully determining wither group or project
> (or neither) is actually active, and print it with the same
> state_qfilestat routine.
> 
> Signed-off-by: Eric Sandeen <sandeen@redhat.com>

Reviewed-by: Bill O'Donnell <billodo@redhat.com>

> ---
> 
> I probably could have done some memcpy()'s in 
> state_stat_to_statv(), but opted for the explicit copy-out;
> the structures aren't identical, although the newer one 
> only differs by padding on the end.  If memcpy() is preferable
> I could send a V2...
> 
> 
> diff --git a/include/xqm.h b/include/xqm.h
> index c084b2d..78262c3 100644
> --- a/include/xqm.h
> +++ b/include/xqm.h
> @@ -32,6 +32,7 @@
>  #define Q_XGETQSTAT	XQM_CMD(5)	/* get quota subsystem status */
>  #define Q_XQUOTARM	XQM_CMD(6)	/* free disk space used by dquots */
>  #define Q_XQUOTASYNC	XQM_CMD(7)	/* delalloc flush, updates dquots */
> +#define Q_XGETQSTATV	XQM_CMD(8)	/* newer version of get quota */
>  #define Q_XGETNEXTQUOTA	XQM_CMD(9)	/* get disk limits and usage */
>  
>  /*
> @@ -149,4 +150,30 @@ typedef struct fs_quota_stat {
>  	__u16		qs_iwarnlimit;	/* limit for num warnings */
>  } fs_quota_stat_t;
>  
> +/*
> + * Some basic information about 'quota files' for Q_XGETQSTATV command
> + */
> +struct fs_qfilestatv {
> +	__u64		qfs_ino;	/* inode number */
> +	__u64		qfs_nblks;	/* number of BBs 512-byte-blks */
> +	__u32		qfs_nextents;	/* number of extents */
> +	__u32		qfs_pad;	/* pad for 8-byte alignment */
> +};
> +
> +struct fs_quota_statv {
> +	__s8			qs_version;	/* version for future changes */
> +	__u8			qs_pad1;	/* pad for 16bit alignment */
> +	__u16			qs_flags;	/* FS_QUOTA_.* flags */
> +	__u32			qs_incoredqs;	/* number of dquots incore */
> +	struct fs_qfilestatv	qs_uquota;	/* user quota information */
> +	struct fs_qfilestatv	qs_gquota;	/* group quota information */
> +	struct fs_qfilestatv	qs_pquota;	/* project quota information */
> +	__s32			qs_btimelimit;	/* limit for blks timer */
> +	__s32			qs_itimelimit;	/* limit for inodes timer */
> +	__s32			qs_rtbtimelimit;/* limit for rt blks timer */
> +	__u16			qs_bwarnlimit;	/* limit for num warnings */
> +	__u16			qs_iwarnlimit;	/* limit for num warnings */
> +	__u64			qs_pad2[8];	/* for future proofing */
> +};
> +
>  #endif	/* __XQM_H__ */
> diff --git a/quota/linux.c b/quota/linux.c
> index 74dba01..4f1f3c4 100644
> --- a/quota/linux.c
> +++ b/quota/linux.c
> @@ -55,6 +55,8 @@ xcommand_to_qcommand(
>  		return Q_XSETQLIM;
>  	case XFS_GETQSTAT:
>  		return Q_XGETQSTAT;
> +	case XFS_GETQSTATV:
> +		return Q_XGETQSTATV;
>  	case XFS_QUOTARM:
>  		return Q_XQUOTARM;
>  	case XFS_QSYNC:
> diff --git a/quota/state.c b/quota/state.c
> index 8186762..5d63579 100644
> --- a/quota/state.c
> +++ b/quota/state.c
> @@ -111,12 +111,12 @@ remove_help(void)
>  
>  static void
>  state_qfilestat(
> -	FILE		*fp,
> -	fs_path_t	*mount,
> -	uint		type,
> -	fs_qfilestat_t	*qfs,
> -	int		accounting,
> -	int		enforcing)
> +	FILE			*fp,
> +	struct fs_path		*mount,
> +	uint			type,
> +	struct fs_qfilestatv	*qfs,
> +	int			accounting,
> +	int			enforcing)
>  {
>  	fprintf(fp, _("%s quota state on %s (%s)\n"), type_to_string(type),
>  		mount->fs_dir, mount->fs_name);
> @@ -142,39 +142,94 @@ state_timelimit(
>  		time_to_string(timelimit, VERBOSE_FLAG | ABSOLUTE_FLAG));
>  }
>  
> +/*
> + * fs_quota_stat holds a subset of fs_quota_statv; this copies
> + * the smaller into the larger, leaving any not-present fields
> + * empty.  This is so the same reporting function can be used
> + * for both XFS_GETQSTAT and XFS_GETQSTATV results.
> + */
>  static void
> -state_quotafile_mount(
> -	FILE		*fp,
> -	uint		type,
> -	fs_path_t	*mount,
> -	uint		flags)
> +state_stat_to_statv(
> +	struct fs_quota_stat	*s,
> +	struct fs_quota_statv	*sv)
>  {
> -	fs_quota_stat_t	s;
> -	char		*dev = mount->fs_name;
> +	memset(sv, 0, sizeof(struct fs_quota_statv));
> +
> +	/* shared information */
> +	sv->qs_version = s->qs_version;
> +	sv->qs_flags = s->qs_flags;
> +	sv->qs_incoredqs = s->qs_incoredqs;
> +	sv->qs_btimelimit = s->qs_btimelimit;
> +	sv->qs_itimelimit = s->qs_itimelimit;
> +	sv->qs_rtbtimelimit = s->qs_rtbtimelimit;
> +	sv->qs_bwarnlimit = s->qs_bwarnlimit;
> +	sv->qs_iwarnlimit = s->qs_iwarnlimit;
> +
> +	/* Always room for uquota */
> +	sv->qs_uquota.qfs_ino = s->qs_uquota.qfs_ino;
> +	sv->qs_uquota.qfs_nblks = s->qs_uquota.qfs_nblks;
> +	sv->qs_uquota.qfs_nextents = s->qs_uquota.qfs_nextents;
> +
> +	/*
> +	 * If we are here, XFS_GETQSTATV failed and XFS_GETQSTAT passed;
> +	 * that is a very strong hint that we're on a kernel which predates
> +	 * the on-disk pquota inode; both were added in v3.12.  So, we do
> +	 * some tricksy determination here.
> +	 * gs_gquota may hold either group quota inode info, or project
> +	 * quota if that is used instead; which one it actually holds depends
> +	 * on the quota flags.  (If neither is set, neither is used)
> +	 */
> +	if (s->qs_flags & XFS_QUOTA_GDQ_ACCT) {
> +		/* gs_gquota holds group quota info */
> +		sv->qs_gquota.qfs_ino = s->qs_gquota.qfs_ino;
> +		sv->qs_gquota.qfs_nblks = s->qs_gquota.qfs_nblks;
> +		sv->qs_gquota.qfs_nextents = s->qs_gquota.qfs_nextents;
> +	} else if (s->qs_flags & XFS_QUOTA_PDQ_ACCT) {
> +		/* gs_gquota actually holds project quota info */
> +		sv->qs_pquota.qfs_ino = s->qs_gquota.qfs_ino;
> +		sv->qs_pquota.qfs_nblks = s->qs_gquota.qfs_nblks;
> +		sv->qs_pquota.qfs_nextents = s->qs_gquota.qfs_nextents;
> +	}
> +}
>  
> -	if (xfsquotactl(XFS_GETQSTAT, dev, type, 0, (void *)&s) < 0) {
> -		if (flags & VERBOSE_FLAG)
> -			fprintf(fp, _("%s quota are not enabled on %s\n"),
> -				type_to_string(type), dev);
> -		return;
> +static void
> +state_quotafile_mount(
> +	FILE			*fp,
> +	uint			type,
> +	struct fs_path		*mount,
> +	uint			flags)
> +{
> +	struct fs_quota_stat	s;
> +	struct fs_quota_statv	sv;
> +	char			*dev = mount->fs_name;
> +
> +	if (xfsquotactl(XFS_GETQSTATV, dev, type, 0, (void *)&sv) < 0) {
> +		if (xfsquotactl(XFS_GETQSTAT, dev, type, 0, (void *)&s) < 0) {
> +			if (flags & VERBOSE_FLAG)
> +				fprintf(fp,
> +					_("%s quota are not enabled on %s\n"),
> +					type_to_string(type), dev);
> +			return;
> +		}
> +		state_stat_to_statv(&s, &sv);
>  	}
>  
>  	if (type & XFS_USER_QUOTA)
> -		state_qfilestat(fp, mount, XFS_USER_QUOTA, &s.qs_uquota,
> -				s.qs_flags & XFS_QUOTA_UDQ_ACCT,
> -				s.qs_flags & XFS_QUOTA_UDQ_ENFD);
> +		state_qfilestat(fp, mount, XFS_USER_QUOTA, &sv.qs_uquota,
> +				sv.qs_flags & XFS_QUOTA_UDQ_ACCT,
> +				sv.qs_flags & XFS_QUOTA_UDQ_ENFD);
>  	if (type & XFS_GROUP_QUOTA)
> -		state_qfilestat(fp, mount, XFS_GROUP_QUOTA, &s.qs_gquota,
> -				s.qs_flags & XFS_QUOTA_GDQ_ACCT,
> -				s.qs_flags & XFS_QUOTA_GDQ_ENFD);
> +		state_qfilestat(fp, mount, XFS_GROUP_QUOTA, &sv.qs_gquota,
> +				sv.qs_flags & XFS_QUOTA_GDQ_ACCT,
> +				sv.qs_flags & XFS_QUOTA_GDQ_ENFD);
>  	if (type & XFS_PROJ_QUOTA)
> -		state_qfilestat(fp, mount, XFS_PROJ_QUOTA, &s.qs_gquota,
> -				s.qs_flags & XFS_QUOTA_PDQ_ACCT,
> -				s.qs_flags & XFS_QUOTA_PDQ_ENFD);
> +		state_qfilestat(fp, mount, XFS_PROJ_QUOTA, &sv.qs_pquota,
> +				sv.qs_flags & XFS_QUOTA_PDQ_ACCT,
> +				sv.qs_flags & XFS_QUOTA_PDQ_ENFD);
>  
> -	state_timelimit(fp, XFS_BLOCK_QUOTA, s.qs_btimelimit);
> -	state_timelimit(fp, XFS_INODE_QUOTA, s.qs_itimelimit);
> -	state_timelimit(fp, XFS_RTBLOCK_QUOTA, s.qs_rtbtimelimit);
> +	state_timelimit(fp, XFS_BLOCK_QUOTA, sv.qs_btimelimit);
> +	state_timelimit(fp, XFS_INODE_QUOTA, sv.qs_itimelimit);
> +	state_timelimit(fp, XFS_RTBLOCK_QUOTA, sv.qs_rtbtimelimit);
>  }
>  
>  static void
> 
> 
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  reply	other threads:[~2016-08-15 13:44 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-12 23:07 [PATCH] xfs_quota: wire up XFS_GETQSTATV Eric Sandeen
2016-08-15 13:44 ` Bill O'Donnell [this message]
2016-08-15 16:38 ` Zorro Lang
2016-08-15 16:43   ` Eric Sandeen
2016-08-16  3:17 ` [PATCH V2] " Eric Sandeen
2016-08-17  8:33   ` Zorro Lang
2016-08-17 14:43     ` Eric Sandeen
2016-08-17 14:58       ` Zorro Lang
2016-08-17 15:02   ` Zorro Lang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160815134400.GA16987@redhat.com \
    --to=billodo@redhat.com \
    --cc=sandeen@redhat.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.