Re: [PATCH] iio: magnetometer: mag3110: claim direct mode during raw reads

[Alison Schofield <amsfield22@gmail.com>]

On Mon, Aug 15, 2016 at 05:04:24PM +0100, Jonathan Cameron wrote:
> On 01/08/16 16:48, Alison Schofield wrote:
> > Driver was checking for direct mode but not locking it.  Use
> > claim/release helper functions to guarantee the device stays
> > in direct mode during raw reads.
> > 
> > Signed-off-by: Alison Schofield <amsfield22@gmail.com>
> > Cc: Daniel Baluta <daniel.baluta@gmail.com>
> > ---
> >  drivers/iio/magnetometer/mag3110.c | 21 +++++++++++++--------
> >  1 file changed, 13 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
> > index f2be4a0..90574ff 100644
> > --- a/drivers/iio/magnetometer/mag3110.c
> > +++ b/drivers/iio/magnetometer/mag3110.c
> > @@ -154,34 +154,39 @@ static int mag3110_read_raw(struct iio_dev *indio_dev,
> >  
> >  	switch (mask) {
> >  	case IIO_CHAN_INFO_RAW:
> > -		if (iio_buffer_enabled(indio_dev))
> > -			return -EBUSY;
> > +		ret = iio_device_claim_direct_mode(indio_dev);
> > +		if (ret)
> > +			return ret;
> >  
> >  		switch (chan->type) {
> >  		case IIO_MAGN: /* in 0.1 uT / LSB */
> >  			ret = mag3110_read(data, buffer);
> >  			if (ret < 0)
> > -				return ret;
> > +				goto release;
> >  			*val = sign_extend32(
> >  				be16_to_cpu(buffer[chan->scan_index]), 15);
> > -			return IIO_VAL_INT;
> > +			ret = IIO_VAL_INT;
> No break?
oops...needs one and the next case too. Thanks!


> >  		case IIO_TEMP: /* in 1 C / LSB */
> >  			mutex_lock(&data->lock);
> >  			ret = mag3110_request(data);
> >  			if (ret < 0) {
> >  				mutex_unlock(&data->lock);
> > -				return ret;
> > +				goto release;
> >  			}
> >  			ret = i2c_smbus_read_byte_data(data->client,
> >  				MAG3110_DIE_TEMP);
> >  			mutex_unlock(&data->lock);
> >  			if (ret < 0)
> > -				return ret;
> > +				goto release;
> >  			*val = sign_extend32(ret, 7);
> > -			return IIO_VAL_INT;
> > +			ret = IIO_VAL_INT;
> No break here either....
> >  		default:
> > -			return -EINVAL;
> > +			ret = -EINVAL;
> >  		}
> > +release:
> > +		iio_device_release_direct_mode(indio_dev);
> > +		return ret;
> > +
> >  	case IIO_CHAN_INFO_SCALE:
> >  		switch (chan->type) {
> >  		case IIO_MAGN:
> > 
>