diff for duplicates of <20160816221957.GP26240@tuxbot> diff --git a/a/1.txt b/N1/1.txt index d9f407b..0b3b6b8 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -2,8 +2,8 @@ On Tue 16 Aug 12:45 PDT 2016, Linus Walleij wrote: > This adds the PM8058 LEDs as used in the platform. > -> Cc: linux-arm-msm@vger.kernel.org -> Cc: linux-leds@vger.kernel.org +> Cc: linux-arm-msm at vger.kernel.org +> Cc: linux-leds at vger.kernel.org > Cc: Andy Gross <andy.gross@linaro.org> > Cc: Stephen Boyd <sboyd@codeaurora.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> @@ -31,7 +31,7 @@ Bjorn > }; > }; > + -> + led@48 { +> + led at 48 { > + /* > + * The keypad LED @0x48 is routed to > + * the sensor board where it is @@ -45,13 +45,13 @@ Bjorn > + label = "proximity0"; > + default-state = "off"; > + }; -> + led@131 { +> + led at 131 { > + compatible = "qcom,pm8058-led"; > + reg = <0x131>; > + label = "pm8058:red"; > + default-state = "off"; > + }; -> + led@132 { +> + led at 132 { > + /* > + * This is actually green too on my > + * board, but documented as yellow. @@ -62,7 +62,7 @@ Bjorn > + default-state = "off"; > + linux,default-trigger = "mmc0"; > + }; -> + led@133 { +> + led at 133 { > + compatible = "qcom,pm8058-led"; > + reg = <0x133>; > + label = "pm8058:green"; diff --git a/a/content_digest b/N1/content_digest index 06d145e..d90fe8b 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,24 +1,16 @@ "ref\01471376759-9561-1-git-send-email-linus.walleij@linaro.org\0" - "From\0Bjorn Andersson <bjorn.andersson@linaro.org>\0" - "Subject\0Re: [PATCH] ARM: dts: add PM8058 LEDs to the APQ8060 Dragonboard\0" + "From\0bjorn.andersson@linaro.org (Bjorn Andersson)\0" + "Subject\0[PATCH] ARM: dts: add PM8058 LEDs to the APQ8060 Dragonboard\0" "Date\0Tue, 16 Aug 2016 15:19:57 -0700\0" - "To\0Linus Walleij <linus.walleij@linaro.org>\0" - "Cc\0linux-arm-kernel@lists.infradead.org" - linux-arm-msm@vger.kernel.org - linux-soc@vger.kernel.org - Andy Gross <andy.gross@linaro.org> - Stephen Boyd <sboyd@codeaurora.org> - David Brown <david.brown@linaro.org> - linux-leds@vger.kernel.org - " Jacek Anaszewski <j.anaszewski@samsung.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "On Tue 16 Aug 12:45 PDT 2016, Linus Walleij wrote:\n" "\n" "> This adds the PM8058 LEDs as used in the platform.\n" "> \n" - "> Cc: linux-arm-msm@vger.kernel.org\n" - "> Cc: linux-leds@vger.kernel.org\n" + "> Cc: linux-arm-msm at vger.kernel.org\n" + "> Cc: linux-leds at vger.kernel.org\n" "> Cc: Andy Gross <andy.gross@linaro.org>\n" "> Cc: Stephen Boyd <sboyd@codeaurora.org>\n" "> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>\n" @@ -46,7 +38,7 @@ "> \t\t\t\t\t};\n" "> \t\t\t\t};\n" "> +\n" - "> +\t\t\t\tled@48 {\n" + "> +\t\t\t\tled at 48 {\n" "> +\t\t\t\t\t/*\n" "> +\t\t\t\t\t * The keypad LED @0x48 is routed to\n" "> +\t\t\t\t\t * the sensor board where it is\n" @@ -60,13 +52,13 @@ "> +\t\t\t\t\tlabel = \"proximity0\";\n" "> +\t\t\t\t\tdefault-state = \"off\";\n" "> +\t\t\t\t};\n" - "> +\t\t\t\tled@131 {\n" + "> +\t\t\t\tled at 131 {\n" "> +\t\t\t\t\tcompatible = \"qcom,pm8058-led\";\n" "> +\t\t\t\t\treg = <0x131>;\n" "> +\t\t\t\t\tlabel = \"pm8058:red\";\n" "> +\t\t\t\t\tdefault-state = \"off\";\n" "> +\t\t\t\t};\n" - "> +\t\t\t\tled@132 {\n" + "> +\t\t\t\tled at 132 {\n" "> +\t\t\t\t\t/*\n" "> +\t\t\t\t\t * This is actually green too on my\n" "> +\t\t\t\t\t * board, but documented as yellow.\n" @@ -77,7 +69,7 @@ "> +\t\t\t\t\tdefault-state = \"off\";\n" "> +\t\t\t\t\tlinux,default-trigger = \"mmc0\";\n" "> +\t\t\t\t};\n" - "> +\t\t\t\tled@133 {\n" + "> +\t\t\t\tled at 133 {\n" "> +\t\t\t\t\tcompatible = \"qcom,pm8058-led\";\n" "> +\t\t\t\t\treg = <0x133>;\n" "> +\t\t\t\t\tlabel = \"pm8058:green\";\n" @@ -91,4 +83,4 @@ "> 2.7.4\n" > -a0a1918f4ec1327744a69ca0aabb014488700e031bc83444f787d9ddbc9a6a98 +f576ed6060c6516edc76167cb02724da28956451d15b5727ec7f2fb41163fb6d
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.