[U-Boot] [GIT] Pull request: u-boot-dfu

[Lukasz Majewski <l.majewski@samsung.com>]

Hi Tom,

> On Wed, Aug 17, 2016 at 11:56:59AM +0200, Lukasz Majewski wrote:
> > Hi Heiko, Ravi,
> > 
> > > Hello B, Ravi,
> > > 
> > > Am 17.08.2016 um 09:40 schrieb B, Ravi:
> > > > Hi Heiko
> > > >
> > > >>>>
> > > >>>> is that for master or next ?
> > > >
> > > >>> This patch _was_ supposed to go to "master"
> > > >
> > > >>>> Was this build tested ?
> > > >
> > > >>> Unfortunately, not so thoroughly as I thought.
> > > >
> > > >>> Moving dfu code to SPL causes following error on some boards:
> > > >
> > > >>>        arm:  +   smartweb
> > > >>> +In file included from ../include/dfu.h:18:0,
> > > >>> +                 from ../common/dfu.c:16:
> > > >>> +../include/linux/usb/composite.h:331:9: error: requested
> > > >>> alignment is +not an integer constant
> > > >>> +  struct usb_device_descriptor
> > > >>> __aligned(CONFIG_SYS_CACHELINE_SIZE) desc;
> > > >>> +         ^
> > > >>> +make[3]: *** [spl/common/dfu.o] Error 1
> > > >>> +make[2]: *** [spl/common] Error 2
> > > >> +make[1]: *** [spl/u-boot-spl] Error 2
> > > >>> +make: *** [sub-make] Error 2
> > > >
> > > > The CONFIG_SYS_CACHELINE_SIZE is not defined for smartweb
> > > > platform which is causing build error. By defining this error
> > > > goes away. What would be value for cache line size for smartweb
> > > > platform? (32/64/..?)
> > > 
> > > Hups? Which patch introduced this? I wonder if other at91
> > > based boards does not show the same error?
> > > 
> > > The RM for the at91sam9260 says:  8 words cache line size
> > > 
> > > So 32 would be the correct value.
> > 
> > Heiko, thanks for your support.
> > 
> > Ravi, Marek Vasut before accepting PR tests following archs with
> > buildman: arm, aarch64, mips, powerpc, nios2 [1]
> > 
> > Regarding the CONFIG_SYS_CACHELINE_SIZE, some older boards do not
> > define it. Hence we have several problems (also with other patches
> > http://patchwork.ozlabs.org/patch/657216/).
> > 
> > IMHO, it would be best to check [1] and then add this define if
> > required.
> > 
> > Or does anybody have any better idea?
> 
> This is something we can get right in Kconfig, I believe.  Looking at
> the Linux Kernel, the relevant bits I think are in
> arch/arm/mm/Kconfig: config ARM_L1_CACHE_SHIFT_6
>         bool
>         default y if CPU_V7
>         help
>           Setting ARM L1 cache line size to 64 Bytes.
> 
> config ARM_L1_CACHE_SHIFT
>         int
>         default 6 if ARM_L1_CACHE_SHIFT_6
>         default 5
> 
> I only hesitate a little as there's not a 1:1 match-up between those
> values and all ARMv7 platforms we have today for example.

True.

I do recall that some Cortex-A9 had 32B L1 cache and Cortex-A8 had 64B
L1 cache line size.

And both were ARMv7 cores.

> 



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group