[U-Boot] [PATCH v3 08/11] am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE

[Andrew F. Davis <afd@ti.com>]

The SPL load address changes based on boot time in HS devices,
ISW_ENTRY_ADDR is used to set this address for AM43xx based SoCs
for similar reasons. Add this same logic for AM33xx devices.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 include/configs/ti_am335x_common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index a0a60d4..52f4ed6 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -57,7 +57,7 @@
  * supports X-MODEM loading via UART, and we leverage this and then use
  * Y-MODEM to load u-boot.img, when booted over UART.
  */
-#define CONFIG_SPL_TEXT_BASE		0x402F0400
+#define CONFIG_SPL_TEXT_BASE		CONFIG_ISW_ENTRY_ADDR
 #define CONFIG_SPL_MAX_SIZE		(0x4030B800 - CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
-- 
2.9.3