[PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile

[shawnguo@kernel.org (Shawn Guo)]

This version looks pretty good to me.  Some nit-picks below though ...

On Tue, Sep 06, 2016 at 02:04:20PM +0800, Jun Nie wrote:
> Add device tree support for ZX296718 SoC and evaluation board based on it.

Please wrap the commit log around column 70.

> Also document new values.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---
>  Documentation/devicetree/bindings/arm/zte.txt |  24 +++
>  arch/arm64/boot/dts/Makefile                  |   1 +
>  arch/arm64/boot/dts/zte/Makefile              |   5 +
>  arch/arm64/boot/dts/zte/zx296718-evb.dts      |  25 +++
>  arch/arm64/boot/dts/zte/zx296718.dtsi         | 254 ++++++++++++++++++++++++++
>  5 files changed, 309 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/zte/Makefile
>  create mode 100644 arch/arm64/boot/dts/zte/zx296718-evb.dts
>  create mode 100644 arch/arm64/boot/dts/zte/zx296718.dtsi

<snip>

> diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile
> new file mode 100644
> index 0000000..6678066
> --- /dev/null
> +++ b/arch/arm64/boot/dts/zte/Makefile
> @@ -0,0 +1,5 @@
> +dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb
> +
> +always		:= $(dtb-y)
> +subdir-y	:= $(dts-dirs)
> +clean-files	:= *.dtb
> diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts
> new file mode 100644
> index 0000000..d7cefb4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts
> @@ -0,0 +1,25 @@
> +/*
> + * ZTE Ltd. zx296718 Plaform
> + *
> + */

We should probably consider to add a proper licence.  GPL/X11 dual is
mostly used and recommended, and there are quite a lot examples in the
DTS folder.

> +/dts-v1/;
> +#include "zx296718.dtsi"
> +
> +/ {
> +	model = "ZTE zx296718 evaluation board";
> +	compatible = "zte,zx296718-evb", "zte,zx296718";
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory at 40000000 {
> +		device_type = "memory";
> +		reg = <0x40000000 0x40000000>;
> +	};
> +
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
> new file mode 100644
> index 0000000..c75a819
> --- /dev/null
> +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
> @@ -0,0 +1,254 @@
> +/*
> + * DTS File for ZTE ZX296718 Plaform
> + *
> + * Copyright (c) 2016 ZTE Semiconductor Co., Ltd.
> + */

Ditto

> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	compatible = "zte,zx296718";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +				core2 {
> +					cpu = <&cpu2>;
> +				};
> +				core3 {
> +					cpu = <&cpu3>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53","arm,armv8";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu1: cpu at 1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53","arm,armv8";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu2: cpu at 2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53","arm,armv8";
> +			reg = <0x0 0x2>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu3: cpu at 3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53","arm,armv8";
> +			reg = <0x0 0x3>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	osc12m: osc12m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12000000>;
> +		clock-output-names = "osc12m";
> +	};
> +
> +	osc24m: osc24m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000000>;
> +		clock-output-names = "osc24m";
> +	};
> +
> +	osc25m: osc25m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +		clock-output-names = "osc25m";
> +	};
> +
> +	clk24k: clk-24k {

I would suggest we name node of fixed rate clock in an unified way like
clock-xxx.

> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000>;
> +		clock-output-names = "rtcclk";
> +	};
> +
> +	osc32k: osc32k-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32000>;
> +		clock-output-names = "osc32k";
> +	};
> +
> +	osc60m: osc60m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <60000000>;
> +		clock-output-names = "osc60m";
> +	};
> +
> +	osc99m: osc99m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <99000000>;
> +		clock-output-names = "osc99m";
> +	};
> +
> +	osc125m: osc125m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <125000000>;
> +		clock-output-names = "osc125m";
> +	};
> +
> +	osc198m: osc198m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <198000000>;
> +		clock-output-names = "osc198m";
> +	};
> +
> +	pll_vga: pll-1073m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <1073000000>;
> +		clock-output-names = "pll_vga";
> +	};
> +
> +	pll_ddr: pll-932m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <932000000>;
> +		clock-output-names = "pll_ddr";
> +	};
> +
> +	pll_mac: pll-1000m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <1000000000>;
> +		clock-output-names = "pll_mac";
> +	};
> +
> +	pll_mm0: pll-1188m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <1188000000>;
> +		clock-output-names = "pll_mm0";
> +	};
> +
> +	pll_mm1: pll-1296m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <1296000000>;
> +		clock-output-names = "pll_mm1";
> +	};
> +
> +	pll_audio: pll-884m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <884000000>;
> +		clock-output-names = "pll_audio";
> +	};
> +
> +	pll_hsic: pll-960m-clk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <960000000>;
> +		clock-output-names = "pll_hsic";
> +	};

Do we really have so many uncontrolled clocks with fixed rate in the
SoC?

Shawn